Connected to VPN is successful but impossible to access the web or any device

[kazep...@gmail.com]

Hello,

My workplace has setup a VPN to ease the access to the storage server from a remote location. I have succeeded connecting to the VPN, but when trying to access any web page or even the NAS it won't work, it acts as if I had no connection or I wasn't connected to anything. I have tried accessing a website (google) directly by IP address to see if it's a DNS config problem, but nothing is reachable.

Here is my config file:

comp-lzo

dev tun

tls-client

remote WORKPLACE_IP OPENVPN_PORT

# The "float" tells OpenVPN to accept authenticated packets from any address, 

# not only the address which was specified in the --remote option. 

# This is useful when you are connecting to a peer which holds a dynamic address 

# such as a dial-in user or DHCP client.

# (Please refer to the manual of OpenVPN for more information.)

#float

# If redirect-gateway is enabled, the client will redirect it's

# default network gateway through the VPN.

# It means the VPN connection will firstly connect to the VPN Server

# and then to the internet.

# (Please refer to the manual of OpenVPN for more information.)

redirect-gateway

# dhcp-option DNS: To set primary domain name server address.

# Repeat this option to set secondary DNS server addresses.

#dhcp-option DNS DNS_IP_ADDRESS

pull

proto udp

script-security 2

ca ca.crt

reneg-sec 0

auth-user-pass

[Tunnelblick developer]

Please post the diagnostic info obtained by following the instructions at Read Before You Post.