Tunnelblick "Waiting for password" on reconnection?

[Honza I]

Hello,

I have version 3.5.3 on OS X 10.10.4, Hackintosh, system never sleeps, runs all the time and I connect to commercial vpn service. The service seems to "kick" all connections out once in a while, my ppp connectional always disconnected at least overnight if not during day. 

Tunnelblick is configured with password in the keychain and connecting is flawless and quick - select the profile and connection is done automatically. The icon changes from black center to white center, excellent speeds and everything works perfectly. MUCH better than ppp vpn I was using before. 

However, after some time the connection seems lost and reconnected. At least that is what I think the log means.  Unluckily, there are problems with reconnection I am unable to identify:

1. Tunnelblick icon changes into oscillating grey center

2. When I put my mouse over the icon, the dark tunnelblick field with usually green text has now yellow text with message "Waiting for password". Note, the password is in the keychain and I do not need to type it in anytime. 

My console shows, that about every hour this line:

7/21/15 6:31:47.138 PM Tunnelblick[62148]: Keychain item retrieved successfully for service = 'Tunnelblick-Auth-VPNProfile' account = 'username'

I think that means the connection is reconnected every hour? 

3. Connections still kind of work, but DNS seems slow and screwy, speeds are low and the whole thing seems bit weird. 

When I disconnect and immediately reconnect, tunnelblick starts working spectacularly well again, until next disconnect. 

I have 

Set DNS/WINS: Set nameserver

OpenVPN version : latest (2.3.6)

Monitor network settings ON

Keep connected  ON

Check if IP address changed ON

Reset primary interface : OFF

Flush DNS cache : ON

Prepend domain name;OFF

Disconnect when going to sleep ON (but computer never sleeps)

Reconncet : ON (but again, it never sleeps)

and VPN credentials are stored for my user name... 

...

Any suggestions, please? 

Thanks

J.  

[jkbull...gmail.com]

Usually I would ask you to follow the instructions at Read Before You Post to get the info needed to diagnose problems.

But in your case, you've supplied enough other info that that isn't all needed. Just wait until the problem happens (and the Tunnelblick icon is oscillating) and then click the "Copy Diagnostic Info to Clipboard" button. Then paste the Clipboard into a reply.

(You needn't try the beta or do anything else in those instructions, which are generalized enough to help find problems that you don't have.)

[Honza I]

Here is the log info with some sanitization which should not impact understanding. Thanks for any help!

*Tunnelblick: OS X 10.10.4; Tunnelblick 3.5.3 (build 4270.4371); prior version 3.5.0 (build 4265); Admin user

Configuration MyVpnProvider

"Sanitized" condensed configuration file for /Library/Application Support/Tunnelblick/Shared/MyVpnProvider.tblk:

client

dev tun

proto udp

port 5588

remote vpn.MyVpnProvider.com

resolv-retry infinite

nobind

persist-key

persist-tun

ca tp.ca.crt

comp-lzo

verb 3

auth-user-pass

auth-nocache

pull

================================================================================

"Sanitized" full configuration file

client

dev tun

proto udp

port 5588

remote vpn.MyVpnProvider.com

resolv-retry infinite

nobind

persist-key

persist-tun

ca tp.ca.crt

comp-lzo

verb 3

auth-user-pass

auth-nocache

pull

================================================================================

There are no unusual files in MyVpnProvider.tblk

================================================================================

Configuration preferences:

autoConnect = 1

-onSystemStart = 0

-notMonitoringConnection = 0

-resetPrimaryInterfaceAfterDisconnect = 0

-runMtuTest = 1

-doNotFlushCache = 0

-keychainHasUsernameAndPassword = 1

-openvpnVersion = -

-keepConnected = 1

-lastConnectionSucceeded = 1

================================================================================

Wildcard preferences:

================================================================================

Program preferences:

skipWarningThatIPAddressDidNotChangeAfterConnection = 1

launchAtNextLogin = 1

menuIconSet = 3.3.TBMenuIcons

notOKToCheckThatIPAddressDidNotChangeAfterConnection = 0

askedUserIfOKToCheckThatIPAddressDidNotChangeAfterConnection = 1

tunnelblickVersionHistory = (

    "3.5.3 (build 4270.4371)",

    "3.5.0 (build 4265)",

    "3.4.3 (build 4055.4198)"

)

lastLaunchTime = 459130808.535688

showConnectedDurations = 1

connectionWindowDisplayCriteria = showWhenConnecting

maxLogDisplaySize = 102400

lastConnectedDisplayName = MyVpnProvider

installationUID (not shown)

keyboardShortcutIndex = 1

namedCredentialsNames = (

    v9347741923

)

updateCheckAutomatically = 0

updateSendProfileInfo = 0

NSWindow Frame SettingsSheetWindow = 994 -66 829 424 0 0 1920 1057 

NSWindow Frame ConnectingWindow = 765 653 389 187 0 0 1920 1057 

NSWindow Frame ListingWindow = 225 391 500 422 0 0 1920 1057 

detailsWindowFrameVersion = 4270.4371

detailsWindowFrame = {{977, 247}, {880, 467}}

detailsWindowLeftFrame = {{0, 0}, {160, 350}}

leftNavSelectedDisplayName = MyVpnProvider

haveDealtWithSparkle1dot5b6 = 1

haveDealtWithOldTunTapPreferences = 1

haveDealtWithOldLoginItem = 1

SUEnableAutomaticChecks = 0

SUFeedURL = https://www.tunnelblick.net/appcast-s.rss

SUScheduledCheckInterval = 86400

SUSendProfileInfo = 0

SULastCheckTime = 2015-07-16 01:07:58 +0000

SULastProfileSubmissionDate = 2015-07-14 00:28:30 +0000

SUHasLaunchedBefore = 1

WebKitDefaultFontSize = 11

WebKitStandardFont = .Helvetica Neue DeskInterface

================================================================================

Tunnelblick Log:

2015-07-21 18:43:08 *Tunnelblick: openvpnstart starting OpenVPN

2015-07-21 18:43:08 *Tunnelblick: OS X 10.10.4; Tunnelblick 3.5.3 (build 4270.4371); prior version 3.5.0 (build 4265)

2015-07-21 18:43:08 *Tunnelblick: Attempting connection with MyVpnProvider; Set nameserver = 1; monitoring connection

2015-07-21 18:43:08 *Tunnelblick: openvpnstart start MyVpnProvider.tblk 1338 1 0 3 0 18736 -ptADGNWradsgnw 2.3.6

2015-07-21 18:43:10 *Tunnelblick: openvpnstart log:

     OpenVPN started successfully. Command used to start OpenVPN (one argument per displayed line):

     

          /Applications/Tunnelblick.app/Contents/Resources/openvpn/openvpn-2.3.6/openvpn

          --daemon

          --log

          /Library/Application Support/Tunnelblick/Logs/-SLibrary-SApplication Support-STunnelblick-SShared-SMyVpnProvider.tblk-SContents-SResources-Sconfig.ovpn.1_0_3_0_18736.1338.openvpn.log

          --cd

          /Library/Application Support/Tunnelblick/Shared/MyVpnProvider.tblk/Contents/Resources

          --config

          /Library/Application Support/Tunnelblick/Shared/MyVpnProvider.tblk/Contents/Resources/config.ovpn

          --cd

          /Library/Application Support/Tunnelblick/Shared/MyVpnProvider.tblk/Contents/Resources

          --management

          127.0.0.1

          1338

          --mtu-test

          --management-query-passwords

          --management-hold

          --script-security

          2

          --up

          /Applications/Tunnelblick.app/Contents/Resources/client.up.tunnelblick.sh -d -f -m -w -ptADGNWradsgnw

          --down

          /Applications/Tunnelblick.app/Contents/Resources/client.down.tunnelblick.sh -d -f -m -w -ptADGNWradsgnw

2015-07-21 18:43:09 OpenVPN 2.3.6 x86_64-apple-darwin [SSL (OpenSSL)] [LZO] [PKCS11] [MH] [IPv6] built on Jul 10 2015

2015-07-21 18:43:09 library versions: OpenSSL 1.0.1p 9 Jul 2015, LZO 2.08

2015-07-21 18:43:09 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:1338

2015-07-21 18:43:09 Need hold release from management interface, waiting...

2015-07-21 18:43:10 *Tunnelblick: Established communication with OpenVPN

2015-07-21 18:43:10 *Tunnelblick: Obtained VPN username and password from the Keychain

2015-07-21 18:43:10 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:1338

2015-07-21 18:43:10 MANAGEMENT: CMD 'pid'

2015-07-21 18:43:10 MANAGEMENT: CMD 'state on'

2015-07-21 18:43:10 MANAGEMENT: CMD 'state'

2015-07-21 18:43:10 MANAGEMENT: CMD 'bytecount 1'

2015-07-21 18:43:10 MANAGEMENT: CMD 'hold release'

2015-07-21 18:43:10 MANAGEMENT: CMD 'username "Auth" "v9347741923"'

2015-07-21 18:43:10 MANAGEMENT: CMD 'password [...]'

2015-07-21 18:43:10 WARNING: No server certificate verification method has been enabled.  See http://openvpn.net/howto.html#mitm for more info.

2015-07-21 18:43:10 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts

2015-07-21 18:43:10 Socket Buffers: R=[196724->65536] S=[9216->65536]

2015-07-21 18:43:10 MANAGEMENT: >STATE:1437522190,RESOLVE,,,

2015-07-21 18:43:10 UDPv4 link local: [undef]

2015-07-21 18:43:10 UDPv4 link remote: [AF_INET]195.191.165.5:5588

2015-07-21 18:43:10 MANAGEMENT: >STATE:1437522190,WAIT,,,

2015-07-21 18:43:10 MANAGEMENT: >STATE:1437522190,AUTH,,,

2015-07-21 18:43:10 TLS: Initial packet from [AF_INET]195.191.165.5:5588, sid=1fd2377e fd6ee98f

2015-07-21 18:43:10 VERIFY OK: depth=1, C=US, ST=CA, L=SanFrancisco, O=MyVpnProvider, CN=MyVpnProvider CA, emailAddress=ad...@MyVpnProvider.com

2015-07-21 18:43:10 VERIFY OK: depth=0, C=US, ST=CA, L=SanFrancisco, O=MyVpnProvider, CN=server, emailAddress=ad...@MyVpnProvider.com

2015-07-21 18:43:11 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-21 18:43:11 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-21 18:43:11 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-21 18:43:11 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-21 18:43:11 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA

2015-07-21 18:43:11 [server] Peer Connection Initiated with [AF_INET]195.191.165.5:5588

2015-07-21 18:43:12 MANAGEMENT: >STATE:1437522192,GET_CONFIG,,,

2015-07-21 18:43:13 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1)

2015-07-21 18:43:13 NOTE: Beginning empirical MTU test -- results should be available in 3 to 4 minutes.

2015-07-21 18:43:13 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway,dhcp-option DNS 10.30.0.1,route 10.30.0.1,topology net30,ping 10,ping-restart 120,ifconfig 10.30.0.10 255.255.255.0'

2015-07-21 18:43:13 OPTIONS IMPORT: timers and/or timeouts modified

2015-07-21 18:43:13 OPTIONS IMPORT: --ifconfig/up options modified

2015-07-21 18:43:13 OPTIONS IMPORT: route options modified

2015-07-21 18:43:13 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified

2015-07-21 18:43:13 WARNING: Since you are using --dev tun with a point-to-point topology, the second argument to --ifconfig must be an IP address.  You are using something (255.255.255.0) that looks more like a netmask. (silence this warning with --ifconfig-nowarn)

2015-07-21 18:43:13 Opening utun (connect(AF_SYS_CONTROL)): Resource busy

2015-07-21 18:43:13 Opened utun device utun1

2015-07-21 18:43:13 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0

2015-07-21 18:43:13 MANAGEMENT: >STATE:1437522193,ASSIGN_IP,,10.30.0.10,

2015-07-21 18:43:13 /sbin/ifconfig utun1 delete

                                        ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address

2015-07-21 18:43:13 NOTE: Tried to delete pre-existing tun/tap instance -- No Problem if failure

2015-07-21 18:43:13 /sbin/ifconfig utun1 10.30.0.10 255.255.255.0 mtu 1500 netmask 255.255.255.255 up

2015-07-21 18:43:13 /Applications/Tunnelblick.app/Contents/Resources/client.up.tunnelblick.sh -d -f -m -w -ptADGNWradsgnw utun1 1500 1542 10.30.0.10 255.255.255.0 init

                                        **********************************************

                                        Start of output from client.up.tunnelblick.sh

                                        Retrieved from OpenVPN: name server(s) [ 10.30.0.1 ], search domain(s) [  ] and SMB server(s) [  ] and using default domain name [ openvpn ]

                                        Ignoring ServerAddresses '10.30.0.1' because ServerAddresses was set manually

                                        Setting search domains to 'openvpn' because running under OS X 10.6 or higher and the search domains were not set manually and 'Prepend domain name to search domains' was not selected

                                        Saved the DNS and SMB configurations so they can be restored

                                        Did not change DNS ServerAddresses setting of '10.0.0.1 8.8.8.8 8.8.4.4 209.244.0.3 208.67.222.222 107.150.40.234' (but re-set it)

                                        Changed DNS SearchDomains setting from '' to 'openvpn'

                                        Changed DNS DomainName setting from 'wowway.com' to 'openvpn'

                                        Did not change SMB NetBIOSName setting of ''

                                        Did not change SMB Workgroup setting of ''

                                        Did not change SMB WINSAddresses setting of ''

                                        DNS servers '10.0.0.1 8.8.8.8 8.8.4.4 209.244.0.3 208.67.222.222 107.150.40.234' were set manually

                                        DNS servers '10.0.0.1 8.8.8.8 8.8.4.4 209.244.0.3 208.67.222.222 107.150.40.234' will be used for DNS queries when the VPN is active

                                        The DNS servers include one or more free public DNS servers known to Tunnelblick and one or more DNS servers not known to Tunnelblick. If used, the DNS servers not known to Tunnelblick may cause DNS queries to fail or be intercepted or falsified even if they are directed through the VPN. Specify only known public DNS servers or DNS servers located on the VPN network to avoid such problems.

                                        Flushed the DNS cache via dscacheutil

                                        /usr/sbin/discoveryutil not present. Not flushing the DNS cache via discoveryutil

                                        Notified mDNSResponder that the DNS cache was flushed

                                        Setting up to monitor system configuration with process-network-changes

                                        End of output from client.up.tunnelblick.sh

                                        **********************************************

2015-07-21 18:43:16 /sbin/route add -net 195.191.165.5 10.0.0.1 255.255.255.255

                                        add net 195.191.165.5: gateway 10.0.0.1

2015-07-21 18:43:16 /sbin/route delete -net 0.0.0.0 10.0.0.1 0.0.0.0

                                        delete net 0.0.0.0: gateway 10.0.0.1

2015-07-21 18:43:16 /sbin/route add -net 0.0.0.0 255.255.255.0 0.0.0.0

                                        add net 0.0.0.0: gateway 255.255.255.0

2015-07-21 18:43:16 MANAGEMENT: >STATE:1437522196,ADD_ROUTES,,,

2015-07-21 18:43:16 /sbin/route add -net 10.30.0.1 255.255.255.0 255.255.255.255

                                        add net 10.30.0.1: gateway 255.255.255.0

2015-07-21 18:43:16 Initialization Sequence Completed

2015-07-21 18:43:16 MANAGEMENT: >STATE:1437522196,CONNECTED,SUCCESS,10.30.0.10,195.191.165.5

2015-07-21 18:43:17 *Tunnelblick: No 'connected.sh' script to execute

2015-07-21 18:43:25 *Tunnelblick: This computer's apparent public IP address changed from 50.4.100.52 before connection to 195.191.165.5 after connection

2015-07-21 18:43:28 *Tunnelblick process-network-changes: A system configuration change was ignored

2015-07-21 18:43:38 *Tunnelblick process-network-changes: A system configuration change was ignored

2015-07-21 18:46:13 NOTE: Empirical MTU test completed [Tried,Actual] local->remote=[1541,1541] remote->local=[1541,1541]

2015-07-21 19:43:11 MANAGEMENT: CMD 'username "Auth" "MyVpnCredentials"'

2015-07-21 19:43:11 MANAGEMENT: CMD 'password [...]'

2015-07-21 19:43:11 VERIFY OK: depth=1, C=US, ST=CA, L=SanFrancisco, O=MyVpnProvider, CN=MyVpnProvider CA, emailAddress=ad...@MyVpnProvider.com

2015-07-21 19:43:11 VERIFY OK: depth=0, C=US, ST=CA, L=SanFrancisco, O=MyVpnProvider, CN=server, emailAddress=ad...@MyVpnProvider.com

2015-07-21 19:43:12 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-21 19:43:12 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-21 19:43:12 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-21 19:43:12 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-21 19:43:12 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA

================================================================================

ifconfig output:

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384

options=3<RXCSUM,TXCSUM>

inet6 ::1 prefixlen 128 

inet 127.0.0.1 netmask 0xff000000 

inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 

nd6 options=1<PERFORMNUD>

gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280

stf0: flags=0<> mtu 1280

en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500

options=b<RXCSUM,TXCSUM,VLAN_HWTAGGING>

ether 74:d4:35:1c:43:8b 

inet6 fe80::76d4:35ff:fe1c:438b%en0 prefixlen 64 scopeid 0x4 

inet 10.0.0.37 netmask 0xffffff00 broadcast 10.0.0.255

nd6 options=1<PERFORMNUD>

media: autoselect

status: active

en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500

ether 24:0a:64:95:8f:9c 

inet6 fe80::260a:64ff:fe95:8f9c%en1 prefixlen 64 scopeid 0x5 

inet 10.0.0.33 netmask 0xffffff00 broadcast 10.0.0.255

nd6 options=1<PERFORMNUD>

media: autoselect

status: active

p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304

ether 06:0a:64:95:8f:9c 

media: autoselect

status: inactive

awdl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1452

ether 36:10:e0:1f:88:9f 

inet6 fe80::3410:e0ff:fe1f:889f%awdl0 prefixlen 64 scopeid 0x7 

nd6 options=1<PERFORMNUD>

media: autoselect

status: active

utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380

inet6 fe80::218f:a25b:9601:1dc5%utun0 prefixlen 64 scopeid 0x8 

inet6 fd9f:e03a:e9f9:9332:218f:a25b:9601:1dc5 prefixlen 64 

nd6 options=1<PERFORMNUD>

utun1: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500

inet 10.30.0.10 --> 255.255.255.0 netmask 0xffffffff 

================================================================================

Console Log:

2015-07-21 14:31:43 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-MyVpnProvider' account = 'username'

2015-07-21 14:31:43 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-MyVpnProvider' account = 'password'

2015-07-21 15:31:44 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-MyVpnProvider' account = 'username'

2015-07-21 15:31:44 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-MyVpnProvider' account = 'password'

2015-07-21 16:31:45 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-MyVpnProvider' account = 'username'

2015-07-21 16:31:45 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-MyVpnProvider' account = 'password'

2015-07-21 17:31:46 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-MyVpnProvider' account = 'username'

2015-07-21 17:31:46 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-MyVpnProvider' account = 'password'

2015-07-21 18:31:47 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-MyVpnProvider' account = 'username'

2015-07-21 18:31:47 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-MyVpnProvider' account = 'password'

2015-07-21 18:42:26 WindowServer[184] CGError post_notification(const CGSNotificationType, void *const, const size_t, const bool, const CGSRealTimeDelta, const int, const CGSConnectionID *const, const pid_t): Timed out 0.250 second wait for reply from "Tunnelblick" for synchronous notification type 100 (kCGSDisplayWillReconfigure) (CID 0x8e23, PID 62148)

2015-07-21 18:42:29 WindowServer[184] CGError post_notification(const CGSNotificationType, void *const, const size_t, const bool, const CGSRealTimeDelta, const int, const CGSConnectionID *const, const pid_t): Timed out 0.250 second wait for reply from "Tunnelblick" for synchronous notification type 100 (kCGSDisplayWillReconfigure) (CID 0x8e23, PID 62148)

2015-07-21 18:43:05 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.100000 seconds...

2015-07-21 18:43:06 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.200000 seconds...

2015-07-21 18:43:06 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.400000 seconds...

2015-07-21 18:43:06 tunnelblickd[71573] Status = 0 from tunnelblick-helper command 'kill 69835'

2015-07-21 18:43:07 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.100000 seconds...

2015-07-21 18:43:07 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.200000 seconds...

2015-07-21 18:43:07 tunnelblickd[71573] Status = 0 from tunnelblick-helper command 'postDisconnect MyVpnProvider.tblk 3'

2015-07-21 18:43:08 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.100000 seconds...

2015-07-21 18:43:08 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.200000 seconds...

2015-07-21 18:43:08 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.400000 seconds...

2015-07-21 18:43:09 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.800000 seconds...

2015-07-21 18:43:09 tunnelblickd[71573] Status = 0 from tunnelblick-helper command 'start MyVpnProvider.tblk 1338 1 0 3 0 18736 -ptADGNWradsgnw 2.3.6'

2015-07-21 18:43:10 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-MyVpnProvider' account = 'username'

2015-07-21 18:43:10 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-MyVpnProvider' account = 'password'

2015-07-21 18:43:16 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.100000 seconds...

2015-07-21 18:43:16 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.200000 seconds...

2015-07-21 18:43:16 tunnelblickd[71573] Status = 0 from tunnelblick-helper command 'connected MyVpnProvider.tblk 3'

2015-07-21 18:44:23 Tunnelblick[62148] Using icon set '3.3.TBMenuIcons' without Retina images

2015-07-21 18:51:09 Tunnelblick[62148] Using icon set '3.3.TBMenuIcons' without Retina images

2015-07-21 19:06:23 Tunnelblick[62148] Using icon set '3.3.TBMenuIcons' without Retina images

2015-07-21 19:43:11 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-MyVpnProvider' account = 'username'

2015-07-21 19:43:11 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-MyVpnProvider' account = 'password'

2015-07-21 20:08:35 Tunnelblick[62148] Using icon set '3.3.TBMenuIcons' without Retina images

2015-07-21 20:10:06 Tunnelblick[62148] NSSoftLinking - The ShareKit framework's library couldn't be loaded from /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/ShareKit.

2015-07-21 20:10:36 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.100000 seconds...

2015-07-21 20:10:36 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.200000 seconds...

2015-07-21 20:10:37 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.400000 seconds...

2015-07-21 20:10:37 tunnelblickd[72302] Status = 0 from tunnelblick-helper command 'printSanitizedConfigurationFile MyVpnProvider.tblk 3'

2015-07-21 20:14:55 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.100000 seconds...

2015-07-21 20:14:55 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.200000 seconds...

2015-07-21 20:14:56 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.400000 seconds...

2015-07-21 20:14:56 tunnelblickd[72328] Status = 0 from tunnelblick-helper command 'printSanitizedConfigurationFile MyVpnProvider.tblk 3'

================================================================================

Non-Apple kexts that are loaded:

Index Refs Address            Size       Wired      Name (Version) <Linked Against>

   18    3 0xffffff7f81e6a000 0x1d000    0x1d000    org.netkas.driver.FakeSMC (1328) <11 7 5 4 3 1>

   20    0 0xffffff7f81fe7000 0x7000     0x7000     com.no-one.BrcmPatchRAM (1.7) <19 5 4 3>

   24    0 0xffffff7f81ec4000 0x5000     0x5000     org.hwsensors.driver.CPUSensors (1328) <18 7 5 4 3>

   35    0 0xffffff7f81ecc000 0x8000     0x8000     org.hwsensors.driver.ACPISensors (1328) <18 11 7 5 4 3>

   40    0 0xffffff7f81e50000 0x1a000    0x1a000    net.osx86.kexts.GenericUSBXHCI (1.2.8d9) <19 12 7 5 4 3>

   42    0 0xffffff7f82596000 0x1b000    0x1b000    com.insanelymac.driver.AppleIntelE1000e (3.1.0) <41 12 5 4 3 1>

   47    0 0xffffff7f81e87000 0x17000    0x17000    org.hwsensors.driver.LPCSensors (1328) <18 12 11 7 5 4 3>

   84    0 0xffffff7f81edc000 0x4000     0x4000     com.dvdfab.kext.fabio (1) <62 59 5 4 3>

  118    0 0xffffff7f80da9000 0x5000     0x5000     com.delantis.kext.tcpblocknke (4.0.0) <7 4 1>

  125    0 0xffffff7f829d8000 0x2000     0x2000     com.regularrateandrhythm.driver.RowmoteIREmu (1.2) <36 19 5 4 3>

[jkbull...gmail.com]

Remove the "persist-tun" line from the configuration file. That can cause problems like the one you described, depending on the specifics of the client configuration and the server's configuration and the routing and other activity that the VPN connection entails.

You should also probably remove the check from "Run MTU maximum size test after connecting" on the "While Connected" tab of the "Advanced" settings window. That only needs to be used when there are suspected connection problems (which I admit you might have but isn't the cause of the problem of waiting for the username/password).

The "runTunnelblickd: no data available from tunnelblickd socket; sleeping…" messages are normal and don't indicate anything wrong.

The

2015-07-21 18:42:26 WindowServer[184] CGError post_notification(const CGSNotificationType, void *const, const size_t, const bool, const CGSRealTimeDelta, const int, const CGSConnectionID *const, const pid_t): Timed out 0.250 second wait for reply from "Tunnelblick" for synchronous notification type 100 (kCGSDisplayWillReconfigure) (CID 0x8e23, PID 62148)

2015-07-21 18:42:29 WindowServer[184] CGError post_notification(const CGSNotificationType, void *const, const size_t, const bool, const CGSRealTimeDelta, const int, const CGSConnectionID *const, const pid_t): Timed out 0.250 second wait for reply from "Tunnelblick" for synchronous notification type 100 (kCGSDisplayWillReconfigure) (CID 0x8e23, PID 62148)

entries might or might not indicate a problem, but seem to have to do with the display, not your connection.

The

2015-07-21 20:10:06 Tunnelblick[62148] NSSoftLinking - The ShareKit framework's library couldn't be loaded from /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/ShareKit.

message is more troubling but I Tunnelblick doesn't (knowingly) use ShareKit, so I assume it isn't a problem.

I suppose either of the last two could have to do with being run on a Hackintosh, but that's just a guess.

[Honza I]

Hello,

thank you very much for the suggestions, I did as suggested and Tunnelblick run stable over night but since morning I seem to have same problems... I am attaching new log now, may be something else popped up?

On Tuesday, July 21, 2015 at 8:38:27 PM UTC-5, jkbull...gmail.com wrote:

Remove the "persist-tun" line from the configuration file. That can cause problems like the one you described, depending on the specifics of the client configuration and the server's configuration and the routing and other activity that the VPN connection entails.

You should also probably remove the check from "Run MTU maximum size test after connecting" on the "While Connected" tab of the "Advanced" settings window. That only needs to be used when there are suspected connection problems (which I admit you might have but isn't the cause of the problem of waiting for the username/password).

*Tunnelblick: OS X 10.10.4; Tunnelblick 3.5.3 (build 4270.4371); prior version 3.5.0 (build 4265); Admin user

Configuration myvpnprovider fixed

"Sanitized" condensed configuration file for /Library/Application Support/Tunnelblick/Shared/myvpnprovider fixed.tblk:

client

dev tun

proto udp

port 5588

remote vpn.myvpnprovider.com

resolv-retry infinite

nobind

persist-key

ca tp.ca.crt

comp-lzo

verb 3

auth-user-pass

auth-nocache

pull

================================================================================

"Sanitized" full configuration file

client

dev tun

proto udp

port 5588

remote vpn.myvpnprovider.com

resolv-retry infinite

nobind

persist-key

ca tp.ca.crt

comp-lzo

verb 3

auth-user-pass

auth-nocache

pull

================================================================================

There are no unusual files in myvpnprovider fixed.tblk

================================================================================

Configuration preferences:

-keychainHasPrivateKey = 0

-keychainHasUsernameAndPassword = 1

-keepConnected = 1

-lastConnectionSucceeded = 1

================================================================================

Wildcard preferences:

================================================================================

Program preferences:

skipWarningThatIPAddressDidNotChangeAfterConnection = 1

launchAtNextLogin = 1

menuIconSet = 3.3.TBMenuIcons

notOKToCheckThatIPAddressDidNotChangeAfterConnection = 0

askedUserIfOKToCheckThatIPAddressDidNotChangeAfterConnection = 1

tunnelblickVersionHistory = (

    "3.5.3 (build 4270.4371)",

    "3.5.0 (build 4265)",

    "3.4.3 (build 4055.4198)"

)

lastLaunchTime = 459130808.535688

showConnectedDurations = 1

connectionWindowDisplayCriteria = showWhenConnecting

maxLogDisplaySize = 102400

lastConnectedDisplayName = myvpnprovider fixed

installationUID (not shown)

keyboardShortcutIndex = 1

namedCredentialsNames = (

    myusername

)

updateCheckAutomatically = 0

updateSendProfileInfo = 0

NSWindow Frame SettingsSheetWindow = 994 4 829 424 0 0 1920 1057 

NSWindow Frame ConnectingWindow = 754 571 412 297 0 0 1920 1057 

NSWindow Frame ListingWindow = 234 579 500 422 0 0 1920 1057 

detailsWindowFrameVersion = 4270.4371

detailsWindowFrame = {{986, 506}, {880, 467}}

detailsWindowLeftFrame = {{0, 0}, {160, 350}}

leftNavSelectedDisplayName = myvpnprovider fixed

haveDealtWithSparkle1dot5b6 = 1

haveDealtWithOldTunTapPreferences = 1

haveDealtWithOldLoginItem = 1

SUEnableAutomaticChecks = 0

SUFeedURL = https://www.tunnelblick.net/appcast-s.rss

SUScheduledCheckInterval = 86400

SUSendProfileInfo = 0

SULastCheckTime = 2015-07-16 01:07:58 +0000

SULastProfileSubmissionDate = 2015-07-14 00:28:30 +0000

SUHasLaunchedBefore = 1

WebKitDefaultFontSize = 11

WebKitStandardFont = .Helvetica Neue DeskInterface

================================================================================

Tunnelblick Log:

2015-07-22 12:04:31 OpenVPN 2.3.6 x86_64-apple-darwin [SSL (OpenSSL)] [LZO] [PKCS11] [MH] [IPv6] built on Jul 10 2015

2015-07-22 12:04:31 library versions: OpenSSL 1.0.1p 9 Jul 2015, LZO 2.08

2015-07-22 12:04:31 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:1338

2015-07-22 12:04:31 Need hold release from management interface, waiting...

2015-07-22 12:04:31 *Tunnelblick: openvpnstart starting OpenVPN

2015-07-22 12:04:32 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:1338

2015-07-22 12:04:32 MANAGEMENT: CMD 'pid'

2015-07-22 12:04:32 MANAGEMENT: CMD 'state on'

2015-07-22 12:04:32 MANAGEMENT: CMD 'state'

2015-07-22 12:04:32 MANAGEMENT: CMD 'bytecount 1'

2015-07-22 12:04:32 MANAGEMENT: CMD 'hold release'

2015-07-22 12:04:32 *Tunnelblick: Established communication with OpenVPN

2015-07-22 12:04:32 *Tunnelblick: Obtained VPN username and password from the Keychain

2015-07-22 12:04:32 MANAGEMENT: CMD 'username "Auth" "myusername"'

2015-07-22 12:04:32 MANAGEMENT: CMD 'password [...]'

2015-07-22 12:04:32 WARNING: No server certificate verification method has been enabled.  See http://openvpn.net/howto.html#mitm for more info.

2015-07-22 12:04:32 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts

2015-07-22 12:04:32 Socket Buffers: R=[196724->65536] S=[9216->65536]

2015-07-22 12:04:32 MANAGEMENT: >STATE:1437584672,RESOLVE,,,

2015-07-22 12:04:33 UDPv4 link local: [undef]

2015-07-22 12:04:33 UDPv4 link remote: [AF_INET]195.191.165.5:5588

2015-07-22 12:04:33 MANAGEMENT: >STATE:1437584673,WAIT,,,

2015-07-22 12:04:33 MANAGEMENT: >STATE:1437584673,AUTH,,,

2015-07-22 12:04:33 TLS: Initial packet from [AF_INET]195.191.165.5:5588, sid=5643f8ed 8362e12d

2015-07-22 12:04:33 VERIFY OK: depth=1, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=myvpnprovider CA, emailAddress=ad...@myvpnprovider.com

2015-07-22 12:04:33 VERIFY OK: depth=0, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=server, emailAddress=ad...@myvpnprovider.com

2015-07-22 12:04:34 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-22 12:04:34 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-22 12:04:34 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-22 12:04:34 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-22 12:04:34 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA

2015-07-22 12:04:34 [server] Peer Connection Initiated with [AF_INET]195.191.165.5:5588

2015-07-22 12:04:35 MANAGEMENT: >STATE:1437584675,GET_CONFIG,,,

2015-07-22 12:04:36 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1)

2015-07-22 12:04:36 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway,dhcp-option DNS 10.30.0.1,route 10.30.0.1,topology net30,ping 10,ping-restart 120,ifconfig 10.30.0.10 255.255.255.0'

2015-07-22 12:04:36 OPTIONS IMPORT: timers and/or timeouts modified

2015-07-22 12:04:36 OPTIONS IMPORT: --ifconfig/up options modified

2015-07-22 12:04:36 OPTIONS IMPORT: route options modified

2015-07-22 12:04:36 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified

2015-07-22 12:04:36 WARNING: Since you are using --dev tun with a point-to-point topology, the second argument to --ifconfig must be an IP address.  You are using something (255.255.255.0) that looks more like a netmask. (silence this warning with --ifconfig-nowarn)

2015-07-22 12:04:36 Opening utun (connect(AF_SYS_CONTROL)): Resource busy

2015-07-22 12:04:36 Opened utun device utun1

2015-07-22 12:04:36 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0

2015-07-22 12:04:36 MANAGEMENT: >STATE:1437584676,ASSIGN_IP,,10.30.0.10,

2015-07-22 12:04:36 /sbin/ifconfig utun1 delete

                                        ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address

2015-07-22 12:04:36 NOTE: Tried to delete pre-existing tun/tap instance -- No Problem if failure

2015-07-22 12:04:36 /sbin/ifconfig utun1 10.30.0.10 255.255.255.0 mtu 1500 netmask 255.255.255.255 up

2015-07-22 12:04:36 /Applications/Tunnelblick.app/Contents/Resources/client.up.tunnelblick.sh -d -f -m -w -ptADGNWradsgnw utun1 1500 1542 10.30.0.10 255.255.255.0 init

                                        **********************************************

                                        Start of output from client.up.tunnelblick.sh

                                        Retrieved from OpenVPN: name server(s) [ 10.30.0.1 ], search domain(s) [  ] and SMB server(s) [  ] and using default domain name [ openvpn ]

                                        Ignoring ServerAddresses '10.30.0.1' because ServerAddresses was set manually

                                        Setting search domains to 'openvpn' because running under OS X 10.6 or higher and the search domains were not set manually and 'Prepend domain name to search domains' was not selected

                                        Saved the DNS and SMB configurations so they can be restored

                                        Did not change DNS ServerAddresses setting of '10.0.0.1 8.8.8.8 8.8.4.4 209.244.0.3 208.67.222.222 107.150.40.234' (but re-set it)

                                        Changed DNS SearchDomains setting from '' to 'openvpn'

                                        Changed DNS DomainName setting from 'wowway.com' to 'openvpn'

                                        Did not change SMB NetBIOSName setting of ''

                                        Did not change SMB Workgroup setting of ''

                                        Did not change SMB WINSAddresses setting of ''

                                        DNS servers '10.0.0.1 8.8.8.8 8.8.4.4 209.244.0.3 208.67.222.222 107.150.40.234' were set manually

                                        DNS servers '10.0.0.1 8.8.8.8 8.8.4.4 209.244.0.3 208.67.222.222 107.150.40.234' will be used for DNS queries when the VPN is active

                                        The DNS servers include one or more free public DNS servers known to Tunnelblick and one or more DNS servers not known to Tunnelblick. If used, the DNS servers not known to Tunnelblick may cause DNS queries to fail or be intercepted or falsified even if they are directed through the VPN. Specify only known public DNS servers or DNS servers located on the VPN network to avoid such problems.

                                        Flushed the DNS cache via dscacheutil

                                        /usr/sbin/discoveryutil not present. Not flushing the DNS cache via discoveryutil

                                        Notified mDNSResponder that the DNS cache was flushed

                                        Setting up to monitor system configuration with process-network-changes

                                        End of output from client.up.tunnelblick.sh

                                        **********************************************

2015-07-22 12:04:39 /sbin/route add -net 195.191.165.5 10.0.0.1 255.255.255.255

                                        add net 195.191.165.5: gateway 10.0.0.1

2015-07-22 12:04:39 /sbin/route delete -net 0.0.0.0 10.0.0.1 0.0.0.0

                                        delete net 0.0.0.0: gateway 10.0.0.1

2015-07-22 12:04:39 /sbin/route add -net 0.0.0.0 255.255.255.0 0.0.0.0

                                        add net 0.0.0.0: gateway 255.255.255.0

2015-07-22 12:04:39 MANAGEMENT: >STATE:1437584679,ADD_ROUTES,,,

2015-07-22 12:04:39 /sbin/route add -net 10.30.0.1 255.255.255.0 255.255.255.255

                                        add net 10.30.0.1: gateway 255.255.255.0

2015-07-22 12:04:39 Initialization Sequence Completed

2015-07-22 12:04:39 MANAGEMENT: >STATE:1437584679,CONNECTED,SUCCESS,10.30.0.10,195.191.165.5

2015-07-22 12:04:40 *Tunnelblick: No 'connected.sh' script to execute

2015-07-22 12:04:47 *Tunnelblick process-network-changes: A system configuration change was ignored

2015-07-22 12:04:48 *Tunnelblick: This computer's apparent public IP address changed from 50.4.100.52 before connection to 195.191.165.5 after connection

2015-07-22 13:04:34 *Tunnelblick: Obtained VPN username and password from the Keychain

2015-07-22 13:04:34 MANAGEMENT: CMD 'username "Auth" "myusername"'

2015-07-22 13:04:34 MANAGEMENT: CMD 'password [...]'

2015-07-22 13:04:34 VERIFY OK: depth=1, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=myvpnprovider CA, emailAddress=ad...@myvpnprovider.com

2015-07-22 13:04:34 VERIFY OK: depth=0, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=server, emailAddress=ad...@myvpnprovider.com

2015-07-22 13:04:35 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-22 13:04:35 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-22 13:04:35 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-22 13:04:35 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-22 13:04:35 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA

2015-07-22 07:45:48 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'username'

2015-07-22 07:45:48 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'password'

2015-07-22 08:45:49 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'username'

2015-07-22 08:45:49 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'password'

2015-07-22 09:45:50 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'username'

2015-07-22 09:45:50 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'password'

2015-07-22 10:45:51 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'username'

2015-07-22 10:45:51 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'password'

2015-07-22 11:28:48 WindowServer[184] CGError post_notification(const CGSNotificationType, void *const, const size_t, const bool, const CGSRealTimeDelta, const int, const CGSConnectionID *const, const pid_t): Timed out 0.250 second wait for reply from "Tunnelblick" for synchronous notification type 100 (kCGSDisplayWillReconfigure) (CID 0x8e23, PID 62148)

2015-07-22 11:45:52 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'username'

2015-07-22 11:45:52 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'password'

2015-07-22 12:04:20 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.100000 seconds...

2015-07-22 12:04:20 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.200000 seconds...

2015-07-22 12:04:20 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.400000 seconds...

2015-07-22 12:04:20 tunnelblickd[80154] Status = 0 from tunnelblick-helper command 'kill 73177'

2015-07-22 12:04:21 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.100000 seconds...

2015-07-22 12:04:21 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.200000 seconds...

2015-07-22 12:04:21 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.400000 seconds...

2015-07-22 12:04:21 tunnelblickd[80154] Status = 0 from tunnelblick-helper command 'postDisconnect myvpnprovider fixed.tblk 3'

2015-07-22 12:04:31 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.100000 seconds...

2015-07-22 12:04:31 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.200000 seconds...

2015-07-22 12:04:31 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.400000 seconds...

2015-07-22 12:04:32 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.800000 seconds...

2015-07-22 12:04:32 tunnelblickd[80154] Status = 0 from tunnelblick-helper command 'start myvpnprovider fixed.tblk 1338 1 0 3 0 16688 -ptADGNWradsgnw 2.3.6'

2015-07-22 12:04:32 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'username'

2015-07-22 12:04:32 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'password'

2015-07-22 12:04:39 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.100000 seconds...

2015-07-22 12:04:39 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.200000 seconds...

2015-07-22 12:04:39 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.400000 seconds...

2015-07-22 12:04:39 tunnelblickd[80154] Status = 0 from tunnelblick-helper command 'connected myvpnprovider fixed.tblk 3'

2015-07-22 13:04:34 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'username'

2015-07-22 13:04:34 Tunnelblick[62148] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'password'

2015-07-22 13:22:43 Tunnelblick[62148] Using icon set '3.3.TBMenuIcons' without Retina images

2015-07-22 13:22:51 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.100000 seconds...

2015-07-22 13:22:51 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.200000 seconds...

2015-07-22 13:22:51 Tunnelblick[62148] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.400000 seconds...

2015-07-22 13:22:51 tunnelblickd[80802] Status = 0 from tunnelblick-helper command 'printSanitizedConfigurationFile myvpnprovider fixed.tblk 3'

...

[jkbull...gmail.com]

I notice this:

2015-07-22 12:04:36 WARNING: Since you are using --dev tun with a point-to-point topology, the second argument to --ifconfig must be an IP address.  You are using something (255.255.255.0) that looks more like a netmask. (silence this warning with --ifconfig-nowarn)

which is from the configuration info being "pushed" from the server to your client computer.

That looks like a problem. I vaguely recall something on an OpenVPN mailing list about this in the past few months. I think that at some point (years ago, perhaps) OpenVPN changed the parameters to ifconfig, and the documentation isn't corrected yet. Or there was some problem, anyway, I suggest you ask about this on the OpenVPN Users mailing list at https://lists.sourceforge.net/lists/listinfo/openvpn-users.

Also, are you sure you want to use your own "10.10.0.1" nameserver? That's unusual.

[irena....@gmail.com]

Hello,

finally I got to test more and search the openvpn forum. Basically I do not have fully functional solution, but it kind of works. 

Main improvement was to remove the 10.0.0.1 as name server. This address, which is my home router, is not accessible through the vpn and it caused lots of issues in seemingly lost connections. Removal has reduced the general problems.

The other suggestions are fine, but this is commercial vpn service and I have no control of what they push to me. I tried various local changes and eventually gave up. 

The green screen goes to yellow after first hour, when the Tunelblick kills the key and relogs in the server again. It also changes the icon to oscillating between open and closed tunnel. Even if the connection keeps working or not, the icon and screen are the same (oscillating and yellow). Disconnecting and reconnecting solves all of the problems. Generally works for about 6-12 hours i a row before I need to restart it. 

So, not perfect, but usable. If I get really annoyed,I can write some apple script which will restart this every hour and be done with it. 

Thanks for the help with this problem... 

[jkbull...gmail.com]

Thanks for the update. You shouldn't have to put up with losing the connection after an hour!

Removing "persist-tun" from your configuration file should fix that problem.

OpenVPN reconnects every hour as a security precaution. Including "persist-tun" causes OpenVPN to do only a partial disconnect/reconnect, and something in the configuration (probably the routing) is causing that partial disconnect/reconnect to fail. (That is actually very, very common.) Removing "persist-tun" should cause OpenVPN to do a more complete disconnect before trying to reconnect, which should fix the problem.

If removing "persist-tun" doesn't help, please post the diagnostic info after (or during) the failed "cycling" that happens after an hour. Perhaps there is something else going on.

[irena....@gmail.com]

Hello,

I actually think, that I do not loose connection after hour - more like overnight or after few hours. And that may simply be the service shedding long time users to save bandwidth - when I was using PPP connection, service always kicked me off overnight.

Here is current log, which shows that after an hour the connection is reestablished successfully:

2015-07-29 18:17:06 Initialization Sequence Completed

2015-07-29 18:17:06 MANAGEMENT: >STATE:1438211826,CONNECTED,SUCCESS,10.30.0.10,195.191.165.5

2015-07-29 18:17:07 *Tunnelblick: No 'connected.sh' script to execute

2015-07-29 18:17:15 *Tunnelblick: This computer's apparent public IP address changed from .... before connection to ..... after connection

2015-07-29 18:42:01 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #946067 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 18:42:01 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #946070 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 18:43:01 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #1071857 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 18:43:01 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #1071859 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 18:43:01 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #1072504 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 19:17:00 *Tunnelblick: Obtained VPN username and password from the Keychain

2015-07-29 19:17:00 TLS: soft reset sec=0 bytes=2881200624/0 pkts=3423856/0

2015-07-29 19:17:00 MANAGEMENT: CMD 'username "Auth" "myusername"'

2015-07-29 19:17:00 MANAGEMENT: CMD 'password [...]'

2015-07-29 19:17:00 VERIFY OK: depth=1, C=US, ST=CA, L=SanFrancisco, O=ServiceProvider, CN= ServiceProvider CA, emailAddress=admin@ ServiceProvider.com

2015-07-29 19:17:00 VERIFY OK: depth=0, C=US, ST=CA, L=SanFrancisco, O= ServiceProvider, CN=server, emailAddress=admin@ ServiceProvider.com

2015-07-29 19:17:01 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-29 19:17:01 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-29 19:17:01 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-29 19:17:01 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-29 19:17:01 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA

What is confusing is, that while connection seems working and data are for sure flowing (and fast actually), the status field when I put my mouse of the Tuneblick icon has yellow text "Waiting for password" and the icon is oscillating between open and close state. So I think this is more of cosmetic problem. 

Per my family observations, they need to disconnect/reconnect the vpn about about twice a day, when they really loose the data connection. 

Not sure what those errors in this log are, but do not seem that harmful. 

Thanks for any help!.

[jkbull...gmail.com]

The partial log you posted isn't much help.

Please use the Copy Diagnostic Info to Clipboard button while "the icon is oscillating between open and close state".

I think it is likely that, although you think the VPN is active, it is not. And that is why your connection is so fast -- you aren't using the VPN!

[irena....@gmail.com]

Hm,

my IP resolves to the vpn IP for web access as well as other programs I am using, so I think all my outside traffic is sent through the vpn. 

Here is the diagnostic report. This is after 13 hours or so of connection. Tunelblick icon/info screen indicated "Waiting for password" but all connections seem to work and the whatismyip.com was showing me as having the vpn IP address. 

autoConnect = 0

-onSystemStart = 0

-keychainHasPrivateKey = 0

-keychainHasUsernameAndPassword = 1

-openvpnVersion = -

-keepConnected = 1

-lastConnectionSucceeded = 1

================================================================================

Wildcard preferences:

================================================================================

Program preferences:

skipWarningThatIPAddressDidNotChangeAfterConnection = 1

launchAtNextLogin = 1

menuIconSet = 3.3.TBMenuIcons

notOKToCheckThatIPAddressDidNotChangeAfterConnection = 0

askedUserIfOKToCheckThatIPAddressDidNotChangeAfterConnection = 1

tunnelblickVersionHistory = (

    "3.5.3 (build 4270.4371)",

    "3.5.0 (build 4265)",

    "3.4.3 (build 4055.4198)"

)

lastLaunchTime = 459884336.459846

showConnectedDurations = 1

connectionWindowDisplayCriteria = showWhenConnecting

maxLogDisplaySize = 102400

lastConnectedDisplayName = myvpnprovider fixed

installationUID (not shown)

keyboardShortcutIndex = 1

namedCredentialsNames = (

    mypassword

)

updateCheckAutomatically = 0

updateCheckBetas = 0

updateSendProfileInfo = 0

NSWindow Frame SettingsSheetWindow = 186 391 829 424 0 0 1920 1057 

NSWindow Frame ConnectingWindow = 765 653 389 187 0 0 1920 1057 

NSWindow Frame ListingWindow = 234 579 500 422 0 0 1920 1057 

detailsWindowFrameVersion = 4270.4371

detailsWindowFrame = {{654, 423}, {880, 467}}

detailsWindowLeftFrame = {{0, 0}, {158, 350}}

leftNavSelectedDisplayName = myvpnprovider fixed

haveDealtWithSparkle1dot5b6 = 1

haveDealtWithOldTunTapPreferences = 1

haveDealtWithOldLoginItem = 1

SUEnableAutomaticChecks = 0

SUFeedURL = https://www.tunnelblick.net/appcast-s.rss

SUScheduledCheckInterval = 86400

SUSendProfileInfo = 0

SULastCheckTime = 2015-07-22 21:34:04 +0000

SULastProfileSubmissionDate = 2015-07-14 00:28:30 +0000

SUHasLaunchedBefore = 1

WebKitDefaultFontSize = 11

WebKitStandardFont = .Helvetica Neue DeskInterface

================================================================================

Tunnelblick Log:

2015-07-29 18:16:58 *Tunnelblick: OS X 10.10.4; Tunnelblick 3.5.3 (build 4270.4371); prior version 3.5.0 (build 4265)

2015-07-29 18:16:58 *Tunnelblick: Attempting connection with myvpnprovider fixed; Set nameserver = 1; monitoring connection

2015-07-29 18:16:58 *Tunnelblick: openvpnstart start myvpnprovider\ fixed.tblk 1337 1 0 3 0 16688 -ptADGNWradsgnw 2.3.6

2015-07-29 18:16:58 OpenVPN 2.3.6 x86_64-apple-darwin [SSL (OpenSSL)] [LZO] [PKCS11] [MH] [IPv6] built on Jul 10 2015

2015-07-29 18:16:58 library versions: OpenSSL 1.0.1p 9 Jul 2015, LZO 2.08

2015-07-29 18:16:58 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:1337

2015-07-29 18:16:58 Need hold release from management interface, waiting...

2015-07-29 18:16:58 *Tunnelblick: openvpnstart starting OpenVPN

2015-07-29 18:16:59 *Tunnelblick: openvpnstart log:

     OpenVPN started successfully. Command used to start OpenVPN (one argument per displayed line):

     

          /Applications/Tunnelblick.app/Contents/Resources/openvpn/openvpn-2.3.6/openvpn

          --daemon

          --log

          /Library/Application Support/Tunnelblick/Logs/-SLibrary-SApplication Support-STunnelblick-SShared-Smyvpnprovider fixed.tblk-SContents-SResources-Sconfig.ovpn.1_0_3_0_16688.1337.openvpn.log

          --cd

          /Library/Application Support/Tunnelblick/Shared/myvpnprovider fixed.tblk/Contents/Resources

          --config

          /Library/Application Support/Tunnelblick/Shared/myvpnprovider fixed.tblk/Contents/Resources/config.ovpn

          --cd

          /Library/Application Support/Tunnelblick/Shared/myvpnprovider fixed.tblk/Contents/Resources

          --management

          127.0.0.1

          1337

          --management-query-passwords

          --management-hold

          --script-security

          2

          --up

          /Applications/Tunnelblick.app/Contents/Resources/client.up.tunnelblick.sh -d -f -m -w -ptADGNWradsgnw

          --down

          /Applications/Tunnelblick.app/Contents/Resources/client.down.tunnelblick.sh -d -f -m -w -ptADGNWradsgnw

2015-07-29 18:16:59 *Tunnelblick: Established communication with OpenVPN

2015-07-29 18:16:59 *Tunnelblick: Obtained VPN username and password from the Keychain

2015-07-29 18:16:59 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:1337

2015-07-29 18:16:59 MANAGEMENT: CMD 'pid'

2015-07-29 18:16:59 MANAGEMENT: CMD 'state on'

2015-07-29 18:16:59 MANAGEMENT: CMD 'state'

2015-07-29 18:16:59 MANAGEMENT: CMD 'bytecount 1'

2015-07-29 18:16:59 MANAGEMENT: CMD 'hold release'

2015-07-29 18:16:59 MANAGEMENT: CMD 'username "Auth" "mypassword"'

2015-07-29 18:16:59 MANAGEMENT: CMD 'password [...]'

2015-07-29 18:16:59 WARNING: No server certificate verification method has been enabled.  See http://openvpn.net/howto.html#mitm for more info.

2015-07-29 18:16:59 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts

2015-07-29 18:16:59 Socket Buffers: R=[196724->65536] S=[9216->65536]

2015-07-29 18:16:59 MANAGEMENT: >STATE:1438211819,RESOLVE,,,

2015-07-29 18:16:59 UDPv4 link local: [undef]

2015-07-29 18:16:59 UDPv4 link remote: [AF_INET]New.IP.Number.5:5588

2015-07-29 18:16:59 MANAGEMENT: >STATE:1438211819,WAIT,,,

2015-07-29 18:16:59 MANAGEMENT: >STATE:1438211819,AUTH,,,

2015-07-29 18:16:59 TLS: Initial packet from [AF_INET]New.IP.Number.5:5588, sid=d0bda100 f163d55d

2015-07-29 18:17:00 VERIFY OK: depth=1, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=myvpnprovider CA, emailAddress=ad...@myvpnprovider.com

2015-07-29 18:17:00 VERIFY OK: depth=0, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=server, emailAddress=ad...@myvpnprovider.com

2015-07-29 18:17:00 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-29 18:17:00 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-29 18:17:00 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-29 18:17:00 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-29 18:17:00 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA

2015-07-29 18:17:00 [server] Peer Connection Initiated with [AF_INET]New.IP.Number.5:5588

2015-07-29 18:17:01 MANAGEMENT: >STATE:1438211821,GET_CONFIG,,,

2015-07-29 18:17:03 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1)

2015-07-29 18:17:03 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway,dhcp-option DNS 10.30.0.1,route 10.30.0.1,topology net30,ping 10,ping-restart 120,ifconfig 10.30.0.10 255.255.255.0'

2015-07-29 18:17:03 OPTIONS IMPORT: timers and/or timeouts modified

2015-07-29 18:17:03 OPTIONS IMPORT: --ifconfig/up options modified

2015-07-29 18:17:03 OPTIONS IMPORT: route options modified

2015-07-29 18:17:03 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified

2015-07-29 18:17:03 WARNING: Since you are using --dev tun with a point-to-point topology, the second argument to --ifconfig must be an IP address.  You are using something (255.255.255.0) that looks more like a netmask. (silence this warning with --ifconfig-nowarn)

2015-07-29 18:17:03 Opening utun (connect(AF_SYS_CONTROL)): Resource busy

2015-07-29 18:17:03 Opened utun device utun1

2015-07-29 18:17:03 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0

2015-07-29 18:17:03 MANAGEMENT: >STATE:1438211823,ASSIGN_IP,,10.30.0.10,

2015-07-29 18:17:03 /sbin/ifconfig utun1 delete

                                        ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address

2015-07-29 18:17:03 NOTE: Tried to delete pre-existing tun/tap instance -- No Problem if failure

2015-07-29 18:17:03 /sbin/ifconfig utun1 10.30.0.10 255.255.255.0 mtu 1500 netmask 255.255.255.255 up

2015-07-29 18:17:03 /Applications/Tunnelblick.app/Contents/Resources/client.up.tunnelblick.sh -d -f -m -w -ptADGNWradsgnw utun1 1500 1542 10.30.0.10 255.255.255.0 init

                                        **********************************************

                                        Start of output from client.up.tunnelblick.sh

                                        Retrieved from OpenVPN: name server(s) [ 10.30.0.1 ], search domain(s) [  ] and SMB server(s) [  ] and using default domain name [ openvpn ]

                                        Ignoring DomainName 'openvpn' because DomainName was set manually

                                        Ignoring ServerAddresses '10.30.0.1' because ServerAddresses was set manually

                                        Not replacing search domains 'openvpn' with 'openvpn' because the search domains were set manually and 'Prepend domain name to search domains' was not selected

                                        Saved the DNS and SMB configurations so they can be restored

                                        Did not change DNS ServerAddresses setting of '8.8.8.8 8.8.4.4 209.244.0.3 208.67.222.222 107.150.40.234'

                                        Did not change DNS SearchDomains setting of 'openvpn'

                                        Did not change DNS DomainName setting of 'openvpn'

                                        Did not change SMB NetBIOSName setting of ''

                                        Did not change SMB Workgroup setting of ''

                                        Did not change SMB WINSAddresses setting of ''

                                        DNS servers '8.8.8.8 8.8.4.4 209.244.0.3 208.67.222.222 107.150.40.234' were set manually

                                        DNS servers '8.8.8.8 8.8.4.4 209.244.0.3 208.67.222.222 107.150.40.234' will be used for DNS queries when the VPN is active

                                        The DNS servers include one or more free public DNS servers known to Tunnelblick and one or more DNS servers not known to Tunnelblick. If used, the DNS servers not known to Tunnelblick may cause DNS queries to fail or be intercepted or falsified even if they are directed through the VPN. Specify only known public DNS servers or DNS servers located on the VPN network to avoid such problems.

                                        Flushed the DNS cache via dscacheutil

                                        /usr/sbin/discoveryutil not present. Not flushing the DNS cache via discoveryutil

                                        Notified mDNSResponder that the DNS cache was flushed

                                        Setting up to monitor system configuration with process-network-changes

                                        End of output from client.up.tunnelblick.sh

                                        **********************************************

2015-07-29 18:17:06 /sbin/route add -net New.IP.Number.5 10.0.0.1 255.255.255.255

                                        add net New.IP.Number.5: gateway 10.0.0.1

2015-07-29 18:17:06 /sbin/route delete -net 0.0.0.0 10.0.0.1 0.0.0.0

                                        delete net 0.0.0.0: gateway 10.0.0.1

2015-07-29 18:17:06 /sbin/route add -net 0.0.0.0 255.255.255.0 0.0.0.0

                                        add net 0.0.0.0: gateway 255.255.255.0

2015-07-29 18:17:06 MANAGEMENT: >STATE:1438211826,ADD_ROUTES,,,

2015-07-29 18:17:06 /sbin/route add -net 10.30.0.1 255.255.255.0 255.255.255.255

                                        add net 10.30.0.1: gateway 255.255.255.0

2015-07-29 18:17:06 Initialization Sequence Completed

2015-07-29 18:17:06 MANAGEMENT: >STATE:1438211826,CONNECTED,SUCCESS,10.30.0.10,New.IP.Number.5

2015-07-29 18:17:07 *Tunnelblick: No 'connected.sh' script to execute

2015-07-29 18:17:15 *Tunnelblick: This computer's apparent public IP address changed from OldIP before connection to New.IP.Number.5 after connection

2015-07-29 18:42:01 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #946067 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 18:42:01 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #946070 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 18:43:01 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #1071857 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 18:43:01 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #1071859 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 18:43:01 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #1072504 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 19:17:00 *Tunnelblick: Obtained VPN username and password from the Keychain

2015-07-29 19:17:00 TLS: soft reset sec=0 bytes=2881200624/0 pkts=3423856/0

2015-07-29 19:17:00 MANAGEMENT: CMD 'username "Auth" "mypassword"'

2015-07-29 19:17:00 MANAGEMENT: CMD 'password [...]'

2015-07-29 19:17:00 VERIFY OK: depth=1, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=myvpnprovider CA, emailAddress=ad...@myvpnprovider.com

2015-07-29 19:17:00 VERIFY OK: depth=0, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=server, emailAddress=ad...@myvpnprovider.com

2015-07-29 19:17:01 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-29 19:17:01 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-29 19:17:01 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-29 19:17:01 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-29 19:17:01 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA

2015-07-29 19:45:30 *Tunnelblick process-network-changes: A system configuration change was ignored

2015-07-29 19:45:40 *Tunnelblick process-network-changes: A system configuration change was ignored

2015-07-29 19:46:13 *Tunnelblick process-network-changes: A system configuration change was ignored

2015-07-29 19:50:02 *Tunnelblick process-network-changes: A system configuration change was ignored

2015-07-29 19:51:39 *Tunnelblick process-network-changes: A system configuration change was ignored

2015-07-29 19:51:50 *Tunnelblick process-network-changes: A system configuration change was ignored

2015-07-29 19:52:01 *Tunnelblick process-network-changes: A system configuration change was ignored

2015-07-29 19:52:11 *Tunnelblick process-network-changes: A system configuration change was ignored

2015-07-29 19:52:51 *Tunnelblick process-network-changes: A system configuration change was ignored

2015-07-29 19:53:02 *Tunnelblick process-network-changes: A system configuration change was ignored

2015-07-29 19:53:12 *Tunnelblick process-network-changes: A system configuration change was ignored

2015-07-29 20:01:39 *Tunnelblick process-network-changes: A system configuration change was ignored

2015-07-29 20:08:19 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #397957 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 20:08:19 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #397958 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 20:08:19 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #397959 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 20:08:19 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #397965 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 20:10:31 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #495151 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 20:10:31 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #495159 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 20:10:31 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #495170 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 20:10:31 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #495171 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 20:10:31 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #495175 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 20:10:31 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #495181 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 20:10:31 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #495191 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 20:10:31 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #495243 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 20:10:50 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #534926 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 20:10:50 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #534927 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 20:10:50 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #535009 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 20:11:01 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #558679 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 20:11:01 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #558684 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 20:11:01 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #558685 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 20:11:01 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #558688 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 20:11:07 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #569509 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 20:11:07 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #569514 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 20:11:07 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #569515 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 20:11:07 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #569519 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings

2015-07-29 20:11:25 Authenticate/Decrypt packet error: packet HMAC authentication failed

2015-07-29 20:17:00 TLS: tls_process: killed expiring key

2015-07-29 20:17:01 TLS: soft reset sec=0 bytes=1134248429/0 pkts=1488213/0

2015-07-29 20:17:01 MANAGEMENT: CMD 'username "Auth" "mypassword"'

2015-07-29 20:17:01 MANAGEMENT: CMD 'password [...]'

2015-07-29 20:17:05 VERIFY OK: depth=1, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=myvpnprovider CA, emailAddress=ad...@myvpnprovider.com

2015-07-29 20:17:05 VERIFY OK: depth=0, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=server, emailAddress=ad...@myvpnprovider.com

2015-07-29 20:17:05 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-29 20:17:05 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-29 20:17:05 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-29 20:17:05 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-29 20:17:05 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA

2015-07-29 21:17:01 TLS: tls_process: killed expiring key

2015-07-29 21:17:05 TLS: soft reset sec=0 bytes=695054653/0 pkts=1031950/0

2015-07-29 21:17:05 MANAGEMENT: CMD 'username "Auth" "mypassword"'

2015-07-29 21:17:05 MANAGEMENT: CMD 'password [...]'

2015-07-29 21:17:05 VERIFY OK: depth=1, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=myvpnprovider CA, emailAddress=ad...@myvpnprovider.com

2015-07-29 21:17:05 VERIFY OK: depth=0, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=server, emailAddress=ad...@myvpnprovider.com

2015-07-29 21:17:06 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-29 21:17:06 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-29 21:17:06 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-29 21:17:06 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-29 21:17:06 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA

2015-07-29 22:17:05 TLS: tls_process: killed expiring key

2015-07-29 22:17:06 TLS: soft reset sec=0 bytes=1013676492/0 pkts=1498231/0

2015-07-29 22:17:06 MANAGEMENT: CMD 'username "Auth" "mypassword"'

2015-07-29 22:17:06 MANAGEMENT: CMD 'password [...]'

2015-07-29 22:17:06 VERIFY OK: depth=1, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=myvpnprovider CA, emailAddress=ad...@myvpnprovider.com

2015-07-29 22:17:06 VERIFY OK: depth=0, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=server, emailAddress=ad...@myvpnprovider.com

2015-07-29 22:17:07 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-29 22:17:07 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-29 22:17:07 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-29 22:17:07 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-29 22:17:07 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA

2015-07-29 23:17:06 TLS: tls_process: killed expiring key

2015-07-29 23:17:07 TLS: soft reset sec=0 bytes=717703167/0 pkts=1108518/0

2015-07-29 23:17:07 MANAGEMENT: CMD 'username "Auth" "mypassword"'

2015-07-29 23:17:07 MANAGEMENT: CMD 'password [...]'

2015-07-29 23:17:07 VERIFY OK: depth=1, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=myvpnprovider CA, emailAddress=ad...@myvpnprovider.com

2015-07-29 23:17:07 VERIFY OK: depth=0, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=server, emailAddress=ad...@myvpnprovider.com

2015-07-29 23:17:08 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-29 23:17:08 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-29 23:17:08 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-29 23:17:08 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-29 23:17:08 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA

2015-07-29 23:34:51 *Tunnelblick process-network-changes: A system configuration change was ignored

2015-07-29 23:37:14 *Tunnelblick process-network-changes: A system configuration change was ignored

2015-07-30 00:17:07 TLS: tls_process: killed expiring key

2015-07-30 00:17:08 TLS: soft reset sec=0 bytes=703238508/0 pkts=1089897/0

2015-07-30 00:17:08 MANAGEMENT: CMD 'username "Auth" "mypassword"'

2015-07-30 00:17:08 MANAGEMENT: CMD 'password [...]'

2015-07-30 00:17:08 VERIFY OK: depth=1, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=myvpnprovider CA, emailAddress=ad...@myvpnprovider.com

2015-07-30 00:17:08 VERIFY OK: depth=0, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=server, emailAddress=ad...@myvpnprovider.com

2015-07-30 00:17:09 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-30 00:17:09 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-30 00:17:09 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-30 00:17:09 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-30 00:17:09 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA

2015-07-30 01:17:08 TLS: tls_process: killed expiring key

2015-07-30 01:17:09 TLS: soft reset sec=0 bytes=547020327/0 pkts=815490/0

2015-07-30 01:17:09 MANAGEMENT: CMD 'username "Auth" "mypassword"'

2015-07-30 01:17:09 MANAGEMENT: CMD 'password [...]'

2015-07-30 01:17:09 VERIFY OK: depth=1, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=myvpnprovider CA, emailAddress=ad...@myvpnprovider.com

2015-07-30 01:17:09 VERIFY OK: depth=0, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=server, emailAddress=ad...@myvpnprovider.com

2015-07-30 01:17:10 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-30 01:17:10 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-30 01:17:10 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-30 01:17:10 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-30 01:17:10 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA

2015-07-30 02:17:09 TLS: tls_process: killed expiring key

2015-07-30 02:17:10 TLS: soft reset sec=0 bytes=630700749/0 pkts=883164/0

2015-07-30 02:17:10 MANAGEMENT: CMD 'username "Auth" "mypassword"'

2015-07-30 02:17:10 MANAGEMENT: CMD 'password [...]'

2015-07-30 02:17:10 VERIFY OK: depth=1, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=myvpnprovider CA, emailAddress=ad...@myvpnprovider.com

2015-07-30 02:17:10 VERIFY OK: depth=0, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=server, emailAddress=ad...@myvpnprovider.com

2015-07-30 02:17:11 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-30 02:17:11 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-30 02:17:11 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-30 02:17:11 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-30 02:17:11 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA

2015-07-30 02:36:03 *Tunnelblick process-network-changes: A system configuration change was ignored

2015-07-30 03:17:10 TLS: tls_process: killed expiring key

2015-07-30 03:17:11 TLS: soft reset sec=0 bytes=485666344/0 pkts=680782/0

2015-07-30 03:17:11 MANAGEMENT: CMD 'username "Auth" "mypassword"'

2015-07-30 03:17:11 MANAGEMENT: CMD 'password [...]'

2015-07-30 03:17:11 VERIFY OK: depth=1, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=myvpnprovider CA, emailAddress=ad...@myvpnprovider.com

2015-07-30 03:17:11 VERIFY OK: depth=0, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=server, emailAddress=ad...@myvpnprovider.com

2015-07-30 03:17:12 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-30 03:17:12 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-30 03:17:12 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-30 03:17:12 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-30 03:17:12 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA

2015-07-30 04:17:11 TLS: tls_process: killed expiring key

2015-07-30 04:17:12 TLS: soft reset sec=0 bytes=640566343/0 pkts=878628/0

2015-07-30 04:17:12 MANAGEMENT: CMD 'username "Auth" "mypassword"'

2015-07-30 04:17:12 MANAGEMENT: CMD 'password [...]'

2015-07-30 04:17:12 VERIFY OK: depth=1, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=myvpnprovider CA, emailAddress=ad...@myvpnprovider.com

2015-07-30 04:17:12 VERIFY OK: depth=0, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=server, emailAddress=ad...@myvpnprovider.com

2015-07-30 04:17:13 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-30 04:17:13 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-30 04:17:13 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-30 04:17:13 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-30 04:17:13 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA

2015-07-30 05:17:12 TLS: tls_process: killed expiring key

2015-07-30 05:17:13 TLS: soft reset sec=0 bytes=504849367/0 pkts=715391/0

2015-07-30 05:17:13 MANAGEMENT: CMD 'username "Auth" "mypassword"'

2015-07-30 05:17:13 MANAGEMENT: CMD 'password [...]'

2015-07-30 05:17:13 VERIFY OK: depth=1, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=myvpnprovider CA, emailAddress=ad...@myvpnprovider.com

2015-07-30 05:17:13 VERIFY OK: depth=0, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=server, emailAddress=ad...@myvpnprovider.com

2015-07-30 05:17:14 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-30 05:17:14 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-30 05:17:14 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-30 05:17:14 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-30 05:17:14 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA

2015-07-30 05:34:13 *Tunnelblick process-network-changes: A system configuration change was ignored

2015-07-30 05:57:49 *Tunnelblick process-network-changes: A system configuration change was ignored

2015-07-30 06:00:12 *Tunnelblick process-network-changes: A system configuration change was ignored

2015-07-30 06:17:13 TLS: tls_process: killed expiring key

2015-07-30 06:17:14 MANAGEMENT: CMD 'username "Auth" "mypassword"'

2015-07-30 06:17:14 MANAGEMENT: CMD 'password [...]'

2015-07-30 06:17:14 VERIFY OK: depth=1, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=myvpnprovider CA, emailAddress=ad...@myvpnprovider.com

2015-07-30 06:17:14 VERIFY OK: depth=0, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=server, emailAddress=ad...@myvpnprovider.com

2015-07-30 06:17:15 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-30 06:17:15 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-30 06:17:15 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-30 06:17:15 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-30 06:17:15 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA

2015-07-30 06:57:43 *Tunnelblick process-network-changes: A system configuration change was ignored

2015-07-30 07:00:13 *Tunnelblick process-network-changes: A system configuration change was ignored

2015-07-30 07:17:14 TLS: tls_process: killed expiring key

2015-07-30 07:17:15 TLS: soft reset sec=0 bytes=63028758/0 pkts=134031/0

2015-07-30 07:17:15 MANAGEMENT: CMD 'username "Auth" "mypassword"'

2015-07-30 07:17:15 MANAGEMENT: CMD 'password [...]'

2015-07-30 07:17:15 VERIFY OK: depth=1, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=myvpnprovider CA, emailAddress=ad...@myvpnprovider.com

2015-07-30 07:17:15 VERIFY OK: depth=0, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=server, emailAddress=ad...@myvpnprovider.com

2015-07-30 07:17:16 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-30 07:17:16 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-30 07:17:16 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-30 07:17:16 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-30 07:17:16 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA

2015-07-30 08:17:15 TLS: tls_process: killed expiring key

2015-07-30 08:17:16 TLS: soft reset sec=0 bytes=115854207/0 pkts=202236/0

2015-07-30 08:17:16 MANAGEMENT: CMD 'username "Auth" "mypassword"'

2015-07-30 08:17:16 MANAGEMENT: CMD 'password [...]'

2015-07-30 08:17:16 VERIFY OK: depth=1, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=myvpnprovider CA, emailAddress=ad...@myvpnprovider.com

2015-07-30 08:17:16 VERIFY OK: depth=0, C=US, ST=CA, L=SanFrancisco, O=myvpnprovider, CN=server, emailAddress=ad...@myvpnprovider.com

2015-07-30 08:17:17 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-30 08:17:17 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-30 08:17:17 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key

2015-07-30 08:17:17 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication

2015-07-30 08:17:17 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA

2015-07-30 03:17:11 Tunnelblick[47079] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'username'

2015-07-30 03:17:11 Tunnelblick[47079] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'password'

2015-07-30 04:17:12 Tunnelblick[47079] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'username'

2015-07-30 04:17:12 Tunnelblick[47079] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'password'

2015-07-30 05:17:13 Tunnelblick[47079] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'username'

2015-07-30 05:17:13 Tunnelblick[47079] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'password'

2015-07-30 06:17:14 Tunnelblick[47079] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'username'

2015-07-30 06:17:14 Tunnelblick[47079] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'password'

2015-07-30 07:17:15 Tunnelblick[47079] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'username'

2015-07-30 07:17:15 Tunnelblick[47079] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'password'

2015-07-30 07:55:47 WindowServer[184] CGError post_notification(const CGSNotificationType, void *const, const size_t, const bool, const CGSRealTimeDelta, const int, const CGSConnectionID *const, const pid_t): Timed out 0.250 second wait for reply from "Tunnelblick" for synchronous notification type 100 (kCGSDisplayWillReconfigure) (CID 0x1d9f7, PID 47079)

2015-07-30 07:56:11 Tunnelblick[47079] Using icon set '3.3.TBMenuIcons' without Retina images

2015-07-30 08:17:16 Tunnelblick[47079] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'username'

2015-07-30 08:17:16 Tunnelblick[47079] Keychain item retrieved successfully for service = 'Tunnelblick-Auth-myvpnprovider fixed' account = 'password'

2015-07-30 08:53:39 Tunnelblick[47079] Using icon set '3.3.TBMenuIcons' without Retina images

2015-07-30 08:53:43 Tunnelblick[47079] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.100000 seconds...

2015-07-30 08:53:43 Tunnelblick[47079] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.200000 seconds...

2015-07-30 08:53:43 Tunnelblick[47079] runTunnelblickd: no data available from tunnelblickd socket; sleeping 0.400000 seconds...

2015-07-30 08:53:43 tunnelblickd[52024] Status = 0 from tunnelblick-helper command 'printSanitizedConfigurationFile myvpnprovider fixed.tblk 3'

================================================================================

Non-Apple kexts that are loaded:

Index Refs Address            Size       Wired      Name (Version) <Linked Against>

   18    3 0xffffff7f81e6a000 0x1d000    0x1d000    org.netkas.driver.FakeSMC (1328) <11 7 5 4 3 1>

   20    0 0xffffff7f81fe7000 0x7000     0x7000     com.no-one.BrcmPatchRAM (1.7) <19 5 4 3>

   24    0 0xffffff7f81ec4000 0x5000     0x5000     org.hwsensors.driver.CPUSensors (1328) <18 7 5 4 3>

   35    0 0xffffff7f81ecc000 0x8000     0x8000     org.hwsensors.driver.ACPISensors (1328) <18 11 7 5 4 3>

   40    0 0xffffff7f81e50000 0x1a000    0x1a000    net.osx86.kexts.GenericUSBXHCI (1.2.8d9) <19 12 7 5 4 3>

   42    0 0xffffff7f82596000 0x1b000    0x1b000    com.insanelymac.driver.AppleIntelE1000e (3.1.0) <41 12 5 4 3 1>

   47    0 0xffffff7f81e87000 0x17000    0x17000    org.hwsensors.driver.LPCSensors (1328) <18 12 11 7 5 4 3>

   84    0 0xffffff7f81edc000 0x4000     0x4000     com.dvdfab.kext.fabio (1) <62 59 5 4 3>

  118    0 0xffffff7f80da9000 0x5000     0x5000     com.delantis.kext.tcpblocknke (4.0.0) <7 4 1>

  125    0 0xffffff7f829d8000 0x2000     0x2000     com.regularrateandrhythm.driver.RowmoteIREmu (1.2) <36 19 5 4 3>