QuickTime 7 Crack MacOSX
Arnau Cyr
On Snow Leopard (10.6), the screen recorder on QuickTime Player worked just fine. However, since I have upgraded to Mountain Lion (10.8) QuickTime screen recorder has been making my 2010 MacBook Air extremely slow/laggy while recording the screen but once I stop recording my computer is no longer slow/laggy.
I happened upon a tutorial that showed someone using VLC to screen capture on a Mac and decided to give it a try. It turns out that functionality was removed from VLC on Lion and Mountain Lion and the reason was provided in this this thread: Mac OS Lion, VLC screen capture does not work:
Apple completely removed the API to capture the screen and replaced it with something totally different. Until anyone steps up and implements the new one, this feature is not available to Lion users. It remains accessible to Snow Leopard and Leopard users of course.
Available on the App store for $10 and records w/o performance issues. I was skeptical at first, so I downloaded its trial, and was extremely happy with the performance. $10 is definitely more than free, but depending on how often you need to record your screen, this is well worth the money in my opinion.
It supports both JPEG and H.264 encoding, but only records up to 25fps. For audio, it allows you to select which input and even allows you to use the computer audio (something QuickTime didn't allow and you had to use a separate utility like Soundflower).
I believe that Apple has upgraded Quicktime's API's for high definition beyond 1080p etc. There is nothing wrong with quicktime per se. It's just laggy with older macs. Maybe faster SSD, more Ram might help?
I am trying to export a video clip I created in After Effects with the DXV 3 codec (DXV Codec - Resolume VJ Software) but it is not appearing in my list no matter which Preset I choose. Running MacOS High Sierra 10.13.2.
I have searched online and have found few definitive answers, does this have to do at all with Apple dropping support for Quicktime? Is there anyway I can manually install the codec into the Adobe Media Encoder CC 2018 manually?
Have you tried uninstalling and then re-installing the CODEC. And, yes, this is very likely to Adobe dropping support for legacy, 32-bit QT CODECs - just take note that it was Apple that dropped support for said CODECs.
Yes, I am downloading the codec from here: DXV Codec - Resolume VJ Software and uninstall/reinstall had no efffect. If there is an alternate location I should be using instead I would appreciate it, and thanks for the reply
Bad: For now if you wish to export DXV files from AE you have to use earlier version of AE. It was comming and in latest Adobe update they dropped support for 3rd party QT codects so also for DXV so in latest version tyyou can't use
For now as I said you can use earlier version of AE/Media Encoder version for DXV export. Or after rendering your outputs from AE to some other codecs just batch rerender them in (that what I use and what i know that work):
- Windows - MPEG Streamclip (can't render with alpha
- MAC - QTAmateur
And lastly - before you start bashing Adobe for that decision let me clarify:
a) It was long time comming and that is just another step of getting rid of QT
b) dropping QT support is good thing because QT is old outdated and 32bit piece of s... oftware
The only regret that I have is only that Resolume guys (that I love and I use that software since version 1.5) did not made Adobe exporter avaliable before Adobe dropped latest version of updates - they know (or should know) that it is comming.
Ok. So as I promissed. Just 2 days ago Resolume guys released DXV exporter for Adobe products (including AE). If anyone need to export from AE straight to DXv codec - download and instal nevest Alley & DXV 3 Codec from this page: Download - Resolume VJ Software
And after that you do not need to look for DXV codec in Quick Time codecs menu - you can find it as separate Codec in AME/AE menu.
FYI, DXV3 should be listed in the same dropdown where you get Quicktime. I know it used to be nested in with all the other quicktime codecs but now it'll be found as it's own thing. Same thing happened with HAP.
It used to work, because I distinctly remember using it. But for some reasons, it no longer does. I was trying to use quicktime player to do a quick screen recording. I opened quicktime player, I chose screen recording and then I chose click all the settings I want until when I finish recording and tries to save it. Then I couldn't fine the save button! I
I've been doing a lot of video production work for the past few months, both for my YouTube channel, and in helping people with their live streams, and one thing that I miss by not having dedicated (and expensive!) video production system like a NewTek TriCaster is being able to record multiple camera angles at their full resolution simultaneously on my Mac.
There are a lot of little conveniences you get used to if you do professional live video production with high-end equipment that you often can't replicate in a budget studio... like my desk here at my house.
If all your cameras have their own storage, you can record on each of them, then bring the footage into your editor and sync the clips by audio afterwards. But this doesn't work with cameras that don't have onboard storage like webcams or PTZ cameras. Also, many cameras have recording time limitations. For example, my Sony a6000, which can only record 30 minute clips.
Wouldn't it be nice if you could record all the cameras immediately on your computer? I mean, you can put multiple camera angles into software like OBS, and have them on-screen at the same time or switch between them live, so why not be able to also save different camera angles at their full resolution (e.g. 1080p) as separate files, so you can re-mix or re-cut the video angles as you see fit?
Well, unfortunately OBS doesn't allow recording multiple cameras to separate files. So, during a livestream, unless you're willing to pay for somewhat expensive software like mimoLive, or dedicated video production hardware like the TriCaster, you're stuck recording one video feed (which can have multiple cameras, but not at full resolution in separate files).
One quick hack is to record one super-wide canvas in OBS, and place one camera on one side, and one on the other, and then crop the video out in editing later, but that's not fun to set up, it eats up even more computer resources (many computers would drop frames while recording, especially at higher resolutions and frame rates), and for longer recordings the post-processing required would take forever.
There was a utility for the Mac that used to be supported and allowed easy multi-camera recording, called CaptureSync, but it was unmaintained as of 2019, and likely won't work with newer Macs. It also cost a pretty penny, but as with most things in video production, it was well worth it if you needed this functionality frequently!
Update: You can also use ISO recording (ISO for 'iso'lated recording of camera inputs) in Wirecast on Mac or Windows, or vMix on windows. Those apps are even more pricey, but if you rely on this functionality, they are solid options.
Nice! One major drawback is you need to have a Mac that can handle the demand recording and saving two simultaneous streams requires. My brand new beefy MacBook Pro can handle two 1080p webcams (Logitech C920) without an issue. But toss 4K in the mix, and things get a little more dicey. Also, the longer the recording, the more chance you can get some dropped frames or delays, so this is not a great solution for multi-hour lectures or time-lapses.
With using of FFMpeg you'll be able to capture cameras without unneeded reencoding, so limit will be your harddrive / usb bus speed and not CPU.
Also you can do recording to one file with multiple tracks at the same time.
With AVFoundation you can grab cameras on MacOS.
More information and in google ofc ;)
Hi Jeff and thank you for sharing your trials.
I don't use QuickTime, but I'm surprised that your CPU is so occupied by just recording three streams (even 4K, its quite heavy but just a download). Does it decode / re-encode them by software by default ?
Have you tried VLC ( -macosx.html) ? It also allows you run concurrent sessions and "convert" each stream on the fly or just save the raw stream, by displaying it or not as needed.
In a future version of your studio you could record the streams from the mac and share the folder to three RPI that would decode/display'em on second hand screens behind the cams.
Regards
Wow! What an amazing trivia. I was amazed that Quicktime can do all of this things. I am not even aware of it! Normally I am downloading another screen recorder to do that. One of them is Acethinker Screen Grabber Premium which captures the screen and audio without any hassle. For this, I will definitely try Quicktime. Thanks!
Hi, I came across your in depth and helpful article while looking for ..a simple option to switch camera's while recording.. I can't find the answer anywhere so I am asking here; I have 2 wide-angle webcams and a mic, simply usb connected to my MacbPro & I want to be able to switch camera's while recording; No need to have a recording in a recording. I use this set up with Zoom and it's possible in Zoom but I cannot find a Macbook App or software in witch I can switch camera's while recording. I now use zoom for recording but it's a pity the recordings loose quality. Mic & Cams are simply usb, I don't really want to extend my hardware, rather keep it simple as I am not a recording tech. Any suggestions would be really helpful. Greetings from The Netherlands.
Thanks Jeff! I just tested this option briefly and it looks good. I appreciate it and look forward to trying it out for guitar videos. I also sync up a separate audio track that I record with my Izotope Spire Studio so I'm less dependent on the quality of audio through Quicktime. I'll report back! I tried Logitech Capture and it was unfortunately bad. I'm hoping this will allow for my Logitech Streamcam and 920c to work together for quality multi view guitar instruction, backing tracks, and reviews. I'm using a 5 year-old iMac, so here's hoping it's got the juice I need.
7fc3f7cf58