Fusion 360 Free Account

[Armanda Kicks]

Iwork during the day in Inventor, with my "company" account. At nite, I work on my hobby stuff with my "personal" account using Fusion. Every time, I need to log out and log in, and I would like to know if there is a way to avoid that... why is the Fusion license directly linked to the Inventor license? They are different softwares, why can I not use a different account for each? I know it's not that big a deal, but it is an annoyance, specially that I use 2 factor login (need to get my phone out, open the app, get the code, blabla), and there is no way to say "don't ask again on this PC". So every morning, I go in inventor, and have to re-login because it figures that because I used Fusion the nite before with my personal account, that I should be wanting to use Inventor with that same account. I use very secure passwords that cannot be remembered, so I also need to get my password manager out, etc.. Then every nite, I need to do the same for Fusion.

Anyways, sorry for going on about it... Just want to know, is there a way that Fusion and Inventor can be ran with a different account, and Fusion would just remember the last account I used in Fusion, and Inventor would just remember the last account I used in Inventor, without looking at what account I used last in Fusion?

Unfortunately, I don't think this is possible, but if you use Inventor at work and Inventor is part of the Product Design & Manufacturing Collection, Fusion 360 as well is part of PDMC, so you should be able to use it with your work account.

So, using Fusion 360 with your personal account, you could invite your work email to the projects, so that you can use then Fusion 360 with the work account accessing to the hobby stuff and at the same time, using the applications of PDMC side by side.

Thank you for your explanation. That is correct, I am using the manufacturing collection, so I can see a bit better why the license is going across. I guess if I had a standalone license of each software it would not do that.

Unfortunately, I cannot really do what you suggested, because in my hobby account I have teams from other people too, and I don't want to start getting to link their teams to my work account. I guess I'll just have to live with it!

I have a similar problem, except for me it is two versions of fusion 360. the first one I had was for a single seat for hobyist. I downloaded that last January. In july my company decided to switch from FeatureCam and a very old out dated version of Inventor to Fusion. Now I can't seam to get rid of my single seat and switch to the team. I no longer need the single seat version. I have been able to share files and everything but I am not using the correct team license.

I was working as a Student in this company on many different projects with my Student account. Now i am working in this Company and we bought a few Fusion360 licenses and got a Team Hub for our department.

No there is no main-assembly where every file is linked, i know about the possibility to make a f3d file from a construction. There are hundreds of single files with different versions, exported parts and norm parts.

The only way I know of to move projects like that is to move the project from your personal hub to your company's team hub. To do this, your student account needs to be invited to the Team Hub. Then, once invited, visit A360 and on the drop-down list for the project should be a Transfer option.

The transfer button that you were mentioning is no longer located there (next to individual projects). You can use this guide here which includes a Team Hub Transfer Wizard to move projects from Single User Storage, or an existing Fusion Team hub, to another Fusion Team Hub.

Can you walk me through your steps? Per that screenshot, that option is no longer available. You have to use the Wizard i linked to in my last post. Does that end up redirecting you at all? Can you try in an incognito Window? Just curious if there is a step I am missing - it should be a wizard with a unique dialog that walks you through moving the project.

Do you mean using the "Fusion Team Hub Onboarding site" option? When I click that I only get an option to move some old junk folder I left on my old personal account to either of my team hubs but I don't see any way to transfer between the 2 hubs. I do have my team hub set as my default and I'm logged in in another tab. If I cancel out of the dialog below it takes me to my old personal hub. Do I need to transfer or delete these project first?

Oh... so there should be a dropdown in the upper left of the left hand column that lets you switch between Single User storage or Fusion Team. Let me check a few things on my end. Feel free to email me at james....@autodesk.com too. These can be hard to troubleshoot over the forum since theres a lot of sensitive data/names/etc.

I've just set both accounts so the invited member(me) is set as Team Administrator and no difference. Tried using the onboarding site on both accounts and the only option I get is the original personal hubs on the left to transfer to either of my team hubs, no dropdown.

Really I'm only experimenting how you'd transfer a project to a customer if you've done work for them but this seems like it's been made way to difficult. What about just a simple copy project to another hub. Questions have come up a few times on the forums about moving\copying projects and folders to other hubs, surely this should be easy and something you can find within your hub.

I am going to be following this, as I had these same issues when I was trying to transfer from my student account to a new seat that my work had bought. Luckily, I was able to extend my student account for 6 months but I need to find out how to transfer all my files over without losing them. I went through and created a new hub and didn't have the transfer option when I was trying to transfer my files either.

*APY= Annual Percentage Yield. APY is accurate as of 08/1/2023. Rates are subject to change after account opening. Minimum opening deposit is $25.00. When Fusion requirements are met, balances over $25,000 earn 0.10% APY. To earn Fusion rate and ATM fee refunds you must satisfy the following requirements during the requirement cycle: have at least 12 debit card transactions post and clear; have at least one automatic payment or direct deposit post and clear and receive statements electronically. Requirement cycles begin on the last calendar day of the month and end on the next to last calendar day of the month (at close of business on a Monday through Saturday and 5:00 pm on a Sunday). To ensure you receive the highest interest rate tier, all Fusion requirements must be met by within the disclosed requirement cycle. ATM transactions do not count toward the 12 check card transactions. International ATM fees are not eligible for ATM fee refund. Interest and ATM refunds will be paid on the last day of the month in which it is earned. If account requirements are not met, the rate will be 0.05% APY and ATM fees will not be refunded. Access to funds for Early Payday can be up to two days prior to date of scheduled payment and is dependent on submission of direct deposit by payer.

Please be advised that you are leaving GFA Federal Credit Union's website. This link is provided as a courtesy. GFA Federal Credit Union does not endorse or control the content of third party websites.

**Fusion Savings Bonus - Quarterly (on the 5th business day of the following month) one (1) randomly selected Fusion Savings Account holder will be eligible to receive up to twice their average daily balance in their Fusion Savings Account, up to a maximum of $250.00. The average daily balance in the account is based on the prior twelve month period. This award is subject to change and will be evaluated each calendar year and can be stopped at any review period. Account holders would be notified if the bonus program ceased. Fusion Savings Eligibility- Account must be open and active as of the date the bonus is credited. $25.00 minimum balance required to be eligible for bonus drawing. Member must be in good standing. Recipients of Bonus Awards agree to their name, photo, story and or likeness to be utilized in promotional materials. Rates, Terms and Bonus values are subject to change at any time. Employees and officials, as well as immediate family and household members of employees and officials of GFA Federal Credit Union, who are Fusion Savings Account holders, are not eligible to be selected for Bonus Awards. Probability of Earning Fusion Savings Bonus - Based on the total number of eligible Fusion Savings Accounts at the time of the quarter end drawing

Cloud Data Fusion creates a tenant project to hold the resources andservices it needs to manage pipelines on your behalf. For example: runningpipelines on your Dataproc clusters that reside in your customerproject. A tenant project is not exposed to you, but when you create aprivate instance, you might need to use the tenant project name to set up VPCpeering.

When you enable the Cloud Data Fusion API, Cloud Data Fusion creates aservice account to get access to resources like Service Networking,Dataproc, Cloud Storage, BigQuery, Spanner,and Bigtable resources. This service account is called theCloud Data Fusion API Service Agent.Roles are automatically granted to this service agent.

Except as otherwise noted, the content of this page is licensed under the Creative Commons Attribution 4.0 License, and code samples are licensed under the Apache 2.0 License. For details, see the Google Developers Site Policies. Java is a registered trademark of Oracle and/or its affiliates.

This article will break down some of the common Account and Billing questions we get. Any changes that need to be made to a Service Fusion account will need to be emailed in to our Support Team (sup...@servicefusion.com). Some requests can be done within Service Fusion directly, while others need specific information. Please click the section below that pertains to your needs to jump ahead!

3a8082e126