Driver Jinka 1351 30

0 views

Skip to first unread message

Message has been deleted

Anna Pybus

unread,

Jul 12, 2024, 1:26:26 PM7/12/24

to trojamcapho

How to Download and Install Driver for JINKA 1351 30 Cutting Plotter

If you are looking for a reliable and easy-to-use cutting plotter, you might want to consider the JINKA 1351 30 model. This device can cut various materials such as vinyl, paper, cardstock, and more with high precision and speed. However, before you can use it, you need to download and install the driver for your computer. A driver is a software that allows your computer to communicate with the cutting plotter and control its functions. Without a driver, you will not be able to use the JINKA 1351 30 cutting plotter properly. Therefore, it is important to download and install the correct driver for your device.

In this article, we will show you how to download and install the driver for JINKA 1351 30 cutting plotter in a few simple steps. Follow these instructions carefully and you will be able to use your cutting plotter in no time.

driver jinka 1351 30

Download ->>->>->> https://ssurll.com/2ySFR2

Step 1: Download the Driver

The first step is to download the driver for JINKA 1351 30 cutting plotter from the official website of JINKA Indonesia . This website provides links to download drivers for different models and versions of JINKA cutting plotters. You need to choose the one that matches your device and operating system.

For example, if you have a JINKA 1351 30 cutting plotter that only cuts (not contour cuts), you need to download the driver from this link: [JINKA XL2022] . If you have a JINKA 1351 30 cutting plotter that can do semi-auto contour cut, you need to download the driver from this link: [JINKA XL2023] . And so on. Make sure you download the correct driver for your device and operating system. If you are not sure which one to choose, you can contact the customer service of JINKA Indonesia for assistance.

Step 2: Install the Driver

The second step is to install the driver for JINKA 1351 30 cutting plotter on your computer. To do this, you need to follow these steps:

Extract the downloaded driver file using a software such as WinRAR or 7-Zip.

Open the extracted folder and find the setup.exe file.

Double-click on the setup.exe file and follow the instructions on the screen.

Choose the language, destination folder, and other options as prompted.

Wait for the installation process to complete.

Restart your computer if required.

After installing the driver, you should be able to see a new icon on your desktop or taskbar that represents the JINKA 1351 30 cutting plotter. You can also check if the driver is installed correctly by going to Device Manager and looking for JINKA 1351 under Ports (COM & LPT).

Step 3: Connect and Configure the Cutting Plotter

The last step is to connect and configure the cutting plotter with your computer. To do this, you need to follow these steps:

Turn on the power switch of the cutting plotter and make sure it is in standby mode.

Connect the cutting plotter to your computer using a USB cable or a serial cable.

Open the software that you want to use with the cutting plotter, such as CorelDraw, Adobe Illustrator, or Artcut.

Select the cutting plotter as the output device and set the appropriate parameters, such as speed, force, offset, etc.

Load the material that you want to cut on the cutting plotter and adjust the blade depth and pressure according to the material thickness.

Send your design to the cutting plotter and start cutting.

Congratulations! You have successfully downloaded and installed the driver for JINKA 1351 30 cutting plotter. Now you can enjoy creating various shapes and patterns with your cutting plotter.