Is this group still awake? And the idler

[jon]

Anyone still out there?

I'm looking for an STL of the idler. The STLs I have here have open
ended slots for the filament, but I want one with a closed slot.  I know
they exist, because I had one until I wore away the closed side!

:)

Jon

[Jon Bondy]

I think I found an appropriate STL.  I'll get back here if that fails to print and fit properly

[djam]

Hi Jon,

How did you get on, I thought I had those files, but couldn't find them :(

Regards,

Darren

[John D]

I'll have them on Saturday when I'm back in Texas.  Nice to see a few faces still around!

[jon]

Thanks Darren and John.  I found a file to print, and it printed nicely ... on the Prusa.  Not so nicely on the A1!  I now use the A1 for large bulky prints, and to use up all of the 3 mm filament that I have.  The Prusa Mk3S and the CR-10 are my go-to printers, unfortunately.

Jon

--
You received this message because you are subscribed to a topic in the Google Groups "trinitylabs-talk" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/trinitylabs-talk/80NgRv-kD4I/unsubscribe.
To unsubscribe from this group and all its topics, send an email to trinitylabs-ta...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/trinitylabs-talk/af8a74c8-dc0a-479a-9310-9092c202626a%40googlegroups.com.