Lkgps Manual
Umbelina Baublitz
Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly.Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release. The manufacturer assumes no responsibility for any errors or omissions in this document.
FCC RF Exposure Information and Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Hi Sir/Mam,Please send features and functions for LKGPS2.Thanks,Reply Leon says:December 29, 2020 at 12:00 amHello, the device makes 1 call at a time to my number, how can you deactivate that? Thank you
Buenas el dispositivo realiza 1 llamada a cada rato a mi numero como se puede desactivar eso? GraciasReply Liamara says:April 10, 2021 at 11:40 amMy lkgps2 is constantly with green light on and does not work, what should I do?
Meu lkgps2 fica co stantemente com Luz verde acesa e no funciona, o que devo fazer?
@manualsplus YouTubeManuals+,Privacy PolicyThis website is an independent publication and is neither affiliated with nor endorsed by any of the trademark owners. The "Bluetooth" word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. The "Wi-Fi" word mark and logos are registered trademarks owned by the Wi-Fi Alliance. Any use of these marks on this website does not imply any affiliation with or endorsement.
Q: Why is my device is not showing the correct location?
A: Check when it is giving the location if it shows the location type as GPS (very accurate) or LBS (not accurate).
If the device is inside a building where no GPS signal is available it will use LBS to try to determine its location.
If you go to history you can filter LBS so it will only show the GPS Location.
Once you have activated then you can call the device and it will automatically answer the call and you will be able to hear. The device doesn't ring or anything as it does not have a speaker.
To save battery you can increase the upload frequency.
As standard, it will report it location every 30 seconds. You can increase this from the commands section of the app. The value is in seconds so if you want 10 mins input 600. You can also send the command "sleep based on vibration" This means if the device is not moving then it will go to sleep.
Firstly, if the device is showing in China, this is because that was the last know location from when they did a Quality Assurance test at the factory. To obtain the device location place the device near a window so that it receives GPS signal and then it will update its location.
When you activate the app you need to give the app permission to access your location, when you do this then the app will automatically select Google maps. To select this manually log out of the app then when in the login screen select the globe in the top right-hand corner then select Google maps.
Have you activated the sim card and inserted into the device? Does the sim have available credit not data only? What network are you using? Can you put the sim card in a phone and check it can make and receive calls SMS and has an internet connection?
When you call does it:
A) Go straight to answer phone? This mean the device is either turned off, not in a service area or the sim card is not inserted properly
B) Rings once then goes straight to answerphone? This mean the device is turned on and working but you may not have an available credit on the device. Remember the sim has to be not data only, it must have credit available for calls, SMS and data.
C) It says the person is unavailable or the service is disconnected? This means that the sim has not been activated properly. Please try in a phone and check that it can make and receive calls.
If you are receiving through the app this is because you have "Armed" the device to act as a car alarm. You will need to "Disarm" by going to the command section of the app. If you are receiving SMS or Calls and wish them to stop send the following message by SMS to the phone number of the sim that is in the device: admin123456
There is a light sensor on the device and if it detect any light it will assume that the device has been removed from the surface it was attached to. I would double-check that there is no light getting to it as it is very sensitive. If you wish to disable the alert the send this SMS to the sim card that is in the device: sos0
If not, send me the phone number of the sim that is in the device, turn it on and tell which network you are using.
I will then remotely communicate with the device and get it online for you.
We will get this resolved ASAP for you. Can you please turn on the device, leave beside a window and the charger. Then send us the mobile number of sim that is in the device, The network you are using and the IMEI number that is printed on the device. We will do some remote diagnostics and get back to you.
Cannot get off this page on the app and is not Tracking
Sim is Telstra 0439240380.
Sim appears to be working and active active.
App is showing map of Australia and correct location here
Thanks
Craig
Hello . I bought a gps tracker : LK209 . It works on SMS i.e. when I call, it sends to me location, when I send a command, it says OK. But in the web and the apps, it says offline even it is working. I think it is a problem with IP&PORT, I've read this in blogs and forums in traccar, but I don't understand these things . can anyone help me ??? Pleeaassee
I found the solution !! In the manual, the website was www.lkgps.net with its IP & Port . When I uses them, it was showing me offline because it was the wrong website . The right website was www.zg666gps.com I searched in the internet for its IP&PORT . And it was different !! Even if both websites have the same design !! But the web address is different . I've known this from translating the chinese manual into english ( because I had 2 manuals : english and chinese ) : in the english manual, there was the wrong website, but in the chinese manual, there was the right one !! And for people where SMS tracking doesn't work after inserting SIM card, try to shake and clap the device . And it will work, otherwise it won't .
Obrigado por adquirir o rastreador. Este manual mostra como operar o dispositivo sem problemas e corretamente. Certifique-se de ler este manual cuidadosamente antes de usar este produto. Observe que as especificaes e informaes esto sujeitas a alteraes sem aviso prvio neste manual. Qualquer alterao ser integrada na verso mais recente. O fabricante no assume nenhuma responsabilidade por quaisquer erros ou omisses neste documento.
COMO REMOVER ???Resposta pelcia diz:Novembro 30, 2020 em 10: 21 amPor SMS funciona, mas os aplicativos me dizem: LK209C no ativado
Vejo que no sou o nico com esse problema.
Parece bem ativado, pois est respondendo a mensagens de texto.
CASO CONTRRIO, h um comando a enviar para ativ-lo?
Par SMS a fonctionne mais les applications me disent: LK209C non active
Je vois que je ne suis pas le seul avoir ce problems.
Il parat bien activ puisqu'il rpond aux SMS.
SINON yat il une commande envoyer pour l'activer?Resposta Lance Howe diz:Dezembro 12, 2020 em 3: 42 amComo voc consegue voltar a ficar online ficou sem crdito agora que completei ainda diz ofline que recarreguei depois de uma ou duas semanas
Oi Senhor / MameEnvie recursos e funes para LKGPS2.Obrigado,Resposta Leon diz:Dezembro 29, 2020 em 12: 00 amOl, o dispositivo faz 1 chamada por vez para o meu nmero, como voc pode desativar isso? Obrigado
Buenas el dispositivo realiza 1 chama a cada rato a mi numero como se puede desactivar eso? GraciasResposta Liamara diz:Abril 10, 2021 em 11: 40 amMeu lkgps2 est constantemente com luz verde acesa e no funciona, o que devo fazer?
Meu lkgps2 fica stantemente com Luz verde acesa e no funciona, o que devo fazer?
Manuais +,Poltica de PrivacidadeEsta website uma publicao independente e no afiliada nem endossada por nenhum dos proprietrios da marca registrada. A marca e os logotipos "Bluetooth" so marcas registradas de propriedade da Bluetooth SIG, Inc. A marca e os logotipos "Wi-Fi" so marcas registradas de propriedade da Wi-Fi Alliance. Qualquer uso destas marcas neste website no implica qualquer afiliao ou endosso.
IMPORTANTE: Verifique que la tarjeta SIM que usara tiene saldo y datos activos, para tal cosa insrtela en un celular, apague el Wifi y verifique que realmente tiene datos. TAMBIEN SERA NECESARIO LLAMAR AL *264 PARA QUE LA LINEA TELEFONICA QUEDE HABILITADA)
1.-Puede encontrar el ID de su dispositivo en el GPS pegado en una estampa. Si no tiene su GPS a la mano puede mandar un SMS con la palabra check123456, le regresar sus parmetros junto con el nmero ID del dispositivo, (comienza con 4720).
2.1- Ingrese a lkgps.net encontrar unas banderas que indican los idiomas, seleccione el de espaol. A la derecha de las banderas, encontrar el siguiente panel, asegrese de seleccionar la opcin ID/IMEI y escribir su nmero ID (comienza con 47200) y la contrasea 123456
Cmo se si ya se le acabo el saldo a mi GPS?
Puede bajar la aplicacin de Telcel y emparejar el numero de su GPS con la app, de ese modo podr estar monitoreando de manera constante el saldo de su GPS.
Por que mi GPS aparece en china desde la plataforma web y por msj de texto si me da bien la ubicacin?
R. Esto puede deberse a un error al momento de adquirir la seal, para resolverlo se recomienda resetear su GPS (apguelo, desconctelo del arns en caso de que sea del tipo de instalacin profesional, djelo apagado por al menos 10 min. Posteriormente squelo al exterior total donde no estorben techos lozas o laminas, djelo por otros 10 min, y llmele o envele el comando para que le regrese ubicacin por msj. de texto, posteriormente verifique que la plataforma ya se haya actualizado a la ubicacin real, si esto no resuelve su problema, por favor comunquese por WhatsApp.