Re: Facebook Bot V1.01 Download
Onofre Alamillo
Hi @nitishrajput01 : Thank you. The above solution worked fine for me. I just wanted to know how to handle this case on taking a release build ? Can I follow the same method or should I go with keytool -exportcert -alias ALIAS_HERE -keystore path/to/mykey.keystore openssl sha1 -binary openssl base64 and copy paste the hashkey generated to facebook settings ?
My question is how does the hash key get into the ionic build android and ionic run android ? Where does the hash key have to be located in order for my project to find it. Am I running the keytool from project root and thus would create a keystore in my project root?
By default, ionic/cordova uses the %HOME%.android\debug.keystore hash key during development builds (ie: ionic build android). This is the DEVELOPMENT key you need to extract and add to the FB Android app profile. The default password for this debug.kestore (for both store and key) is android.
When you compile your app for publication, you create your own keystore and reuse that key during the final android compile process (before submitting to store). You will need to add this hash key to the FB Android app profile too. This is the PRODUCTION key.
Hello, please, could you clarify me about wiring of this board? I mean about thin CAN cable near to power suply. I have this board for ERCF but I cannot see it in list USB on my RaspberryPi. On board lighting three blue LED but it's all. I hold SW1 button long time, short time but nothing...
Thank you - helped me immensely when I had to flash Klipper onto this board for my ERCF!!
QQ: Did you have to blank off the Mellow can board's usb cable on Klipper host (RPI)) side to not push 5V back to the host?
I had strange power related issues.. and sinmce blocking that USB-A cable side pin off it seems much better.. no I just get a kernal dump on Klipper whenever I power off the ERCF Fly Borad's 24V supply
I had the same issue with the FlyBoard not shown in my RASPI. There a few people on facebook with the same problem and most of the time, its an dirty or jamming reset button. I cleaned it with some ethanol and now it is working fine. The two thin cables seem to be for the flashing via CAN, but you also can flash the board via usb, too (as described above).
Be aware, the USB connexion on this board is not really reliable. There is problem on RP2040 chip for the USB connexion. You will have to do multiple reset on the board "button" if your Klipper do not find it ... I have this same problem on the fystec board which use the same chip. Mellow was supposed to desactivate the option to run USB on this board.
This is a good tutorial, thanks.
I think the make menuconfig settings required to build the Klipper firmware has changed (or might be wrong above) if you intend to flash firmware for controlling this board via USB.
I have only been using Collision detection up to now. I tried touch initially with the EASY BRD but it did not work reliably. I have not tried with the Fly board at all, but collision is really accurate if you tune the current down enough so it detects when the filament collides with the extruder gears. Best would be to talk to Moggie directly on Discord because there are some requirements for Touch to work for the selector or the extruder.
It depends on your specific setup. It can run in CAN or USB mode. The setup determines what mode is preferred. I use mine in USB mode without any issues, but I use the CAN ports to provide a good source of 24v.
It looks like you're using an ad blocker, so you'll have to wait 15 more sec.
Hide ads with Premium to skip the wait and help us pay for bandwidth, hosting, and other bills.
Or please add this site to your allowlist (AdBlock Plus,uBlock Origin)
Keeping up with friends is faster and easier than ever with the Facebook Lite app! Use Facebook Lite as a friends app to connect and keep up with your social network. The Facebook Lite app is small, allowing you to save space on your phone and use Facebook in 2G conditions. Many of the classic features of Facebook are available on the app, such as sharing to a Timeline, liking photos, searching for people, and editing your profile and groups. Specific features include:
The Facebook app does more than help you stay connected with your friends and interests. It's also your personal organizer for storing, saving and sharing photos. It's easy to share photos straight from your Android camera, and you have full control over your photos and privacy settings. You can choose when to keep individual photos private or even set up a secret photo album to control who sees it.
Facebook Lite also helps you keep up with the latest news and current events around the world. Subscribe to your favorite celebrities, brands, websites, artists, or sports teams to follow their News Feeds from the convenience of your Facebook Lite app!
Consumer Health Privacy Policy: www.facebook.com/privacy/policies/health
Problems with downloading or installing the app? See www.facebook.com/help/fblite
Still need help? Please tell us more about the issue: www.facebook.com/help/contact/640732869364975
Facebook is only available to people aged 13 and over.
Terms of Service: m.facebook.com/terms.php