Easeus Nas Data Recovery
Lorna Schildt
In general, however, data recovery software is safe and can be a helpful tool if you've lost important files with intuitive graphic user interface. However, it's essential to be careful when using these programs, as they can sometimes cause more damage to your device. If you're unsure whether it's safe to use data recovery software, it's always best to consult with a professional.
Data recovery software is a program that can be used to recover lost or deleted files from your computer. When a file is deleted, the data is not actually erased from your hard drive. Instead, the file space occupied is simply marked as empty and available for new data. As long as the old data is not overwritten, it can be recovered using special software. Data recovery tools work by scanning your hard drive for any traces of the lost data. Once they have located the data, they can then rebuild the files and save them to a new location. In most cases, data recovery software can successfully recover lost files with little to no damage. However, if the data has been overwritten, it will be much more difficult to recover.
The system constantly reboot and freeze with an error message displayed on the screen or even stop working entirely without any notifications? Don't worry. Try EaseUS data recovery software to copy out all the critical files.
Hard disk does not respond and hear a few "biz biz" when you're trying to boot from it, and then it stops and becomes inaccessible? Try EaseUS data recovery software to recover data from the dead hard drive and do hard disk repair.
My 1 TB external hard disc (WD - My Passport) stopped working and the NTFS table is corrupted so the drive is unreadable. I haven't formatted the drive so it shows up as RAW. I installed two programs to try to recover the data, iCare Professional and EaseUS Recovery.
Data recovery on large volume drives can be such an agony especially if you are using window's tools to recover the same drive that windows is unable to read. I have had success recovering similar raw and unrecognized drives using linux distros as well. My suggestion: Download Ultimate Boot CD, make a bootable USB or CD of it. Boot from it and launch Parted Magic. Mount all partitions on the drive and see if you are able to access your lost files© them to another drive. If this fails, proceed with Testdisk as MOatz suggested in his comment. Testdisk&many other drive recovery tools are included in UBCD. It's your best bet. Best of Luck
Data recovery can take a while, although I've never seen a hard drive have to take that long to be read from and repair. What kind of state is the drive in, is it making noises, does it report bad sectors, what happened to it to make the NTFS table corrupt?
I'd start by using a tool such as ddrescue (packaged in linux as gddrescue) and imaging the drive to another hard drive of equal or preferably larger size. Then once imaged you can use tools such as Testdisk or Photorec to recover the data (or even restore the file structure to the disk if your aim is to re-use the drive).
If you format the drive data recovery won't be faster. If you are sure that the original problem is with a corrupted NTFS table you could try using some kind of partition recovery software. However the best option is such cases it to use the services of a data recovery company. Data recovery is not an easy process and if you aren't a 100% sure what and why you are doing you might end up losing your data.
All the download links since ver 9.10 are listed below. The installers you get from these download links are the Trial for each different versions. To unlock them and enjoy the features in the full version, please activate with your license code.
EaseUS Data Recovery Wizard 13.8
EaseUS Data Recovery Wizard 12.9.1
EaseUS Data Recovery Wizard 11.9
EaseUS Data Recovery Wizard 10.8
If you placed the order but failed to receive the license code after ONE hour, even after checking the Spam folder, please visit this link to retrieve it. Please check the details as shown in the screenshot.
Please launch EaseUS Data Recovery Wizard and find the ACTIVATE or UPGRADE icon on the right top corner. It will pop up an activation box by clicking that icon. Please check the screenshot below.
If the activation fails or the computer is not connected to Internet, click here to follow the instructions of the Offline Activation.
Normally the refund request are processed by our technical support team. It is recommended to send a refund request to techs...@easeus.com. Our support will deal with your refund within 24 hours.
EaseUS Data Recovery Wizard provides Trial version and Free version to test the recovery quality. The Trial version is a preview version with no free recovery, while the Free version grants 2 GB free recovery. You are suggested to follow the guide in the page below to obtain the 2GB free recovery in the correct Free version.
-recovery/30030.html
After completing a full search with EaseUS Data Recovery Wizard Free or Trial version, you will be presented with a list of files found by the software, and you can use the preview function to check if the content of the files is still intact and recoverable. If a file enables a good preview, it will be successfully recovered by our program. If it does not enable a good preview, please contact our Livechat support to have a double check with the recovery possibility of that file.
It strongly depends on the capacity of your hard drive and the performance of your computer. As reference, most drive recoveries can be completed in about 10 to 12 hours for a 1-TB healthy hard drive in general conditions.
Yes, you are able to save the scan session when the scan is manually stopped or automatically completed. For how to do so:
=30003
This can effectively avoid a new scan from scratch when the program is accidentally or forced to be closed during the recovery.
Please follow the steps below to troubleshoot the reason that causes this issue:
1. For your reference, the advanced search can be completed in around 10 to 12 hours for a 1-TB healthy hard drive in general conditions. If your scanning time is in this time range, please wait patiently and do not stop the scan in the middle of the process.
2. For some reasons, the hard drive is disconnected from the computer, especially for external ones. To fix this issue, please change a new cable or slot to do the recovery again.
3. Your hard drive may contains a serious physical error (such as bad sectors, bad tracks). You can use HDTune to scan the disk to check the disk health status. If the diagnosis shows physical error, you may need assistance from a local data recovery lab as our software is incapable of fixing a physical error.
We adopt several different scan methods to ensure a better scan result. 1 file could be detected by multiple scan methods and each method will create 1 copy of the file in the scan result, so it is normal more files found than you actually have. You may just try them one by one, and save the copy that can be accessed correctly.
EaseUS Data Recovery Wizard offers data filter and search functions. You can filter the files by size and type, or search them by file/folder name or file extension. Please refer to this link:
=30009
These files without correct file names or folder structures must be found by RAW Recovery, which is much reliable and useful while the file directory info of lost files has been damaged. If the recovered files with correct file names cannot be opened or they cannot be found by file names or folder structures, please check every file with random names to get lost data back. To know more about it:
=30011
The storage structure of the lost files would be altered or damaged by any changes on the drive. If you save the recovered files back to the same drive, the original data structures and data content would be corrupted or overwritten, which causes permanent data loss. So you should prepare another drive to save the files.
A file is saved as 2 parts on the storage device: directory info (which is comprised by file name, time stamp and size info, etc.) and data content. If the files with original file names and folder structures cannot be opened, one possible reason is the corrupted directory info. There is still a chance to recover the data content with the RAW Recovery method in our software.
To know more about this:
=30010
I used Recuva and EASEUS Data Recovery Wizard to see if there's any difference in the files they recover. Both software were able to recover files that I want however most of the files where no longer usable. For example, for images, when you view them it's just black, for .doc files, MS Word can no longer open open them. They appear to be corrupted. This happens on both Recuva and EASEUS.
What happened was that those files were fragmented, and once they were deleted, the cluster chain was removed, so when the programs "recovered" them, what they did was to look at the starting location (which is still present) and the size of the file (which is also still present) and simply copied that many clusters in a row from the start.
This works fine if the files are stored in a single, contiguous block (i.e., defragmented), but if they were fragmented, then their blocks are spread out around the disk and the program has absolutely no way to know where/which ones to use; that's why most of the corrupted recovered files will have at least one cluster's worth of correct data, but then contain whatever happened to be in the subsequent clusters that used to belong to other files.
If the files are plain-text, then you could search the drive for unused clusters (which is a nightmare with a giant, nearly empty disk) and manually stitch the file back together (I did this a few times many years ago). But with binary files, this is effectively impossible. In fact, even with plain-text files, it is difficult at best if the file had been getting edited and saved after changes numerous times because it then becomes difficult to identify the clusters that contain blocks of the last version of the file.
c80f0f1006