Local installation help needed

[Shaun Joseph]

Hello group,

Would someone be able to assist me in fully installing this tool locally? I was able to install partially but I am having difficulty with selecting any environment options and as such I am not seeing choices for CCDA document validation. Please see attached for screenshots of the web based tool versus my local installation. Please advise on the steps I need to take further. Please feel free to email or call me.

Thanks,

 

Shaun Joseph, MS

Programmer Analyst

shj...@nyp.org

212-585-6533

NewYork-Presbyterian Hospital

Information Systems

 

---

This electronic message is intended to be for the use only of the named recipient, and may contain information that is confidential or privileged. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of the contents of this message is strictly prohibited. If you have received this message in error or are not the named recipient, please notify us immediately by contacting the sender at the electronic mail address noted above, and delete and destroy all copies of this message. Thank you.
code:d34y

[Andrew McCaffrey]

Hello,

Which portions of the tooling are you planning to use? Depending on
your use case, it may make more sense to install the Edge Testing Tool
(ETT) as that has incorporated virtually all of the features that were
in the TTT.

-Andrew

On 08/01/2016 04:58 AM, Shaun Joseph wrote:
> Hello group,
>
> Would someone be able to assist me in fully installing this tool
> locally? I was able to install partially but I am having difficulty with
> selecting any environment options and as such I am not seeing choices
> for CCDA document validation. Please see attached for screenshots of the
> web based tool versus my local installation. Please advise on the steps
> I need to take further. Please feel free to email or call me.
>
> Thanks,
>

> *Shaun Joseph, MS*
>
> Programmer Analyst
>
> shj...@nyp.org <mailto:shj...@nyp.org>
>
> 212-585-6533

>
> Description: Description: Impact Team 2.jpg
>

> *NewYork-Presbyterian Hospital*
>
> *Information Systems*
>
> ------------------------------------------------------------------------

> This electronic message is intended to be for the use only of the named
> recipient, and may contain information that is confidential or
> privileged. If you are not the intended recipient, you are hereby
> notified that any disclosure, copying, distribution or use of the
> contents of this message is strictly prohibited. If you have received
> this message in error or are not the named recipient, please notify us
> immediately by contacting the sender at the electronic mail address
> noted above, and delete and destroy all copies of this message. Thank you.
> code:d34y
>

> --
> You received this message because you are subscribed to the Google
> Groups "Transport Testing Tool" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to transport-testing...@googlegroups.com
> <mailto:transport-testing...@googlegroups.com>.
> For more options, visit https://groups.google.com/d/optout.

[Shaun Joseph]

Hi Andrew,
I am seeking to install the C-CDA Message Validator to validate CCDA transmissions and the information content needed for a successful transmission.
Thanks,
Shaun Joseph
shj...@nyp.org
212-585-6533

[Shaun Joseph]

Andrew,
Is it possible to set up a call to get some assistance with this installation? Perhaps a visual trace of the steps can identify what I am doing wrong or what I need additionally for a successful installation. Please advise on the possibility of having a webinar session to work through this. I'd be willing to work with whatever time you have available.

[Andrew McCaffrey]

Hi,

Is this for C-CDA R2.1 or C-CDA R1.1 (or both)?

-Andrew

[Shaun Joseph]

Andrew,
I honestly don't know the differences in the versions you are referring to. Ultimately, what I want is a replica of the web based version to run on my local PC. Can you assist with that? I can show you how far we've gotten and maybe you can tell me if I am missing a file or if a setting is off etc. Let me know if you have time and I can attempt to set up a call.

[Perugini, Julien C. (IntlAssoc)]

Hello,

If you are looking to set up the environment for TTT tool you need to have the external cache folder.
You can find it here
https://bitbucket.org/jperugini/ett/downloads/external_cache.zip
Once this is unzipped on your system you need to go to Toolkit Configuration and set the property for the external to point to this folder.

Julien

-----Original Message-----
From: transport-t...@googlegroups.com [mailto:transport-t...@googlegroups.com] On Behalf Of Shaun Joseph
Sent: Wednesday, August 03, 2016 9:57 AM
To: McCaffrey, Andrew B. (Fed) <andrew.m...@nist.gov>; 'transport-t...@googlegroups.com' <transport-t...@googlegroups.com>
Cc: Virginia G. Lorenzi <vlor...@nyp.org>
Subject: RE: Local installation help needed

To unsubscribe from this group and stop receiving emails from it, send an email to transport-testing...@googlegroups.com.

[Shaun Joseph]

Thanks Julien- I'd give this a try and let you know if it works.

[Shaun Joseph]

All,
Please see attached for what we were able to install and it's difference from the web-based tool. I really think a short call with the developers can set us on the right track.

Julien/Andrew,
Would you be able to willing to spend some time with our team to get this installed fully?

Shaun Joseph
shj...@nyp.org
212-585-6533



-----Original Message-----

From: Perugini, Julien C. (IntlAssoc) [mailto:julien....@nist.gov]
Sent: Wednesday, August 03, 2016 11:17 AM

[Perugini, Julien C. (IntlAssoc)]

Hello,

I am sorry I think I gave you the wrong link for the external cache.
The correct link for TTT should be
https://sourceforge.net/projects/iheos/files/external_cache.zip/download

Inside the external_cache folder you should have a file named tk_props.txt.
This file holds some of the configuration for TTT, you should change some of them to reflect your system configuration.
I believe if you set the property toolkit.home: direct (it should already be set in this external cache) you will have the C-CDA validation.

Let me know.

Julien

[Shaun Joseph]

Hey Andrew/Julien,
My colleague is making great strides in setting up the local version of the web-based NIST tool. The local page mirrors that of the web-based version now. The last issues we are having is the 'validate' button does not work and the 'inspect metadata' button is greyed out. Attached are screenshot to show the validation results we expected to see but did not realize with the local installation. Any suggestions for this final step?

[Shaun Joseph]

Hi Andrew/Julien,
This is a follow up. Do you have any further suggestions as to how we may proceed to have this tool functional? Any additional support would be immensely appreciated.

Thanks,

Shaun Joseph
shj...@nyp.org
212-585-6533



-----Original Message-----

[Perugini, Julien C. (IntlAssoc)]

Hi,

I do not think the inspect meted button does anything for C-CDA validation so I think this is ok if this one is greyed out.

However the validate button should be working.

I do not really know what could be happening here so I might need more information to help m figure out what is going on.

Could you give us the log output of what is happening when you press the validate button?

Log file should be located in TOMVAT_DIR/logs/catalina.out

Thanks,

Julien

Julien PERUGINI

---

From: Shaun Joseph <shj...@nyp.org>
Sent: Tuesday, August 16, 2016 3:23:32 PM

[Elwyn Alcantara]

Hey Julien,

 

I went back in downgraded to Tomcat 5.5.36, paired it with xdstools2.200.war and loaded the externalcache.zip you provided a link for and it seems the Validate button is now responding for CCDAs. I will follow up with Shaun on this.

 

Thank you for all of your help Sir and enjoy your weekend.

 

Regards,

Elwyn Alcantara
SCM Technical Operations
New York-Presbyterian Hospital
The University Hospital of Columbia and Cornell

[Perugini, Julien C. (IntlAssoc)]

Hello,

Glad you got it working. It is good to know that newer tomcat version cannot run xdstools2.war properly.

Let me know if you have more questions.

Thanks,

Julien

Julien PERUGINI

---

From: Elwyn Alcantara <ela...@nyp.org>
Sent: Friday, August 19, 2016 4:15:39 PM
To: Perugini, Julien C. (IntlAssoc); Shaun Joseph; McCaffrey, Andrew B. (Fed); 'transport-t...@googlegroups.com'

[Virginia G. Lorenzi]

Hey Elwyn - hope I can do it on my laptop as well : )

 

Virginia Lorenzi

Manager - HIT Standards and Collaborations

NewYork-Presbyterian Hospital

 

“This electronic message is intended to be for the use only of the named

recipient, and may contain information that is confidential or privileged.

If you are not the intended recipient, you are hereby notified that any

disclosure, copying, distribution or use of the contents of this message

is strictly prohibited. If you have received this message in error or are

not the named recipient, please notify us immediately by contacting the

sender at the electronic mail address noted above, and delete and

destroy all copies of this message. Thank you.”

---

From: Perugini, Julien C. (IntlAssoc) [julien....@nist.gov]
Sent: Tuesday, August 23, 2016 3:50 AM
To: Elwyn Alcantara; Shaun Joseph; McCaffrey, Andrew B. (Fed); 'transport-t...@googlegroups.com'
Cc: Virginia G. Lorenzi

[Shaun Joseph]

Hey Julien/Andrew,

Attached is a copy of the validation results for a CCD ran against the NIST saved locally? Any thoughts as to why the validation results ae displayed in this manner? Please advise.

Thanks,

Shaun Joseph

shj...@nyp.org

212-585-6533

---

Confidential Information subject to NYP's (and its affiliates') information management and security policies (http://infonet.nyp.org/QA/HospitalManual).

[Andrew McCaffrey]

Hi,

It looks like all the information is present, just incorrectly
displayed. Could it be a browser issue? We test using Chrome and
Firefox. Could you try one of those?

Thanks,
-Andrew

On 10/12/2016 11:26 PM, Shaun Joseph wrote:
> Hey Julien/Andrew,
>
> Attached is a copy of the validation results for a CCD ran against the
> NIST saved locally? Any thoughts as to why the validation results ae
> displayed in this manner? Please advise.
>
> Thanks,
>

> *Shaun Joseph*

>
> shj...@nyp.org <mailto:shj...@nyp.org>
>
> 212-585-6533
>
> Description: Description: Impact Team 2.jpg
>

> *From:*Elwyn Alcantara
> *Sent:* Friday, August 19, 2016 4:16 PM
> *To:* 'Perugini, Julien C. (IntlAssoc)'; Shaun Joseph; McCaffrey, Andrew
> B. (Fed); 'transport-t...@googlegroups.com'
> *Cc:* Virginia G. Lorenzi
> *Subject:* RE: Local installation help needed

>
> Hey Julien,
>
> I went back in downgraded to Tomcat 5.5.36, paired it with
> xdstools2.200.war and loaded the externalcache.zip you provided a link
> for and it seems the Validate button is now responding for CCDAs. I will
> follow up with Shaun on this.
>
> Thank you for all of your help Sir and enjoy your weekend.
>
> Regards,
>

> *Elwyn Alcantara*
> /SCM Technical Operations/
> *New York-Presbyterian Hospital
> *The University Hospital of Columbia and Cornell
>
> *From:*Perugini, Julien C. (IntlAssoc) [mailto:julien....@nist.gov]
> *Sent:* Tuesday, August 16, 2016 9:31 PM
> *To:* Shaun Joseph; McCaffrey, Andrew B. (Fed);
> 'transport-t...@googlegroups.com'
> *Cc:* Virginia G. Lorenzi; Elwyn Alcantara
> *Subject:* Re: Local installation help needed

>
> Hi,
>
> I do not think the inspect meted button does anything for C-CDA
> validation so I think this is ok if this one is greyed out.
>
> However the validate button should be working.
>
> I do not really know what could be happening here so I might need more
> information to help m figure out what is going on.
>
> Could you give us the log output of what is happening when you press the
> validate button?
>
> Log file should be located in TOMVAT_DIR/logs/catalina.out
>
> Thanks,
>
> Julien
>
> Julien PERUGINI
>

> ------------------------------------------------------------------------
>
> *From:*Shaun Joseph <shj...@nyp.org <mailto:shj...@nyp.org>>
> *Sent:* Tuesday, August 16, 2016 3:23:32 PM
> *To:* Perugini, Julien C. (IntlAssoc); McCaffrey, Andrew B. (Fed);
> 'transport-t...@googlegroups.com'
> *Cc:* Virginia G. Lorenzi; Elwyn Alcantara
> *Subject:* RE: Local installation help needed

>
> Hi Andrew/Julien,
> This is a follow up. Do you have any further suggestions as to how we
> may proceed to have this tool functional? Any additional support would
> be immensely appreciated.
> Thanks,
>
> Shaun Joseph

> shj...@nyp.org <mailto:shj...@nyp.org>

> 212-585-6533
>
>
>
> -----Original Message-----
> From: Shaun Joseph
> Sent: Monday, August 08, 2016 3:56 PM
> To: 'Perugini, Julien C. (IntlAssoc)'; McCaffrey, Andrew B. (Fed);
> 'transport-t...@googlegroups.com'
> Cc: Virginia G. Lorenzi; Elwyn Alcantara
> Subject: RE: Local installation help needed
>
> Hey Andrew/Julien,
> My colleague is making great strides in setting up the local version of
> the web-based NIST tool. The local page mirrors that of the web-based
> version now. The last issues we are having is the 'validate' button does
> not work and the 'inspect metadata' button is greyed out. Attached are
> screenshot to show the validation results we expected to see but did not
> realize with the local installation. Any suggestions for this final step?
>
> Shaun Joseph

> shj...@nyp.org <mailto:shj...@nyp.org>

> shj...@nyp.org <mailto:shj...@nyp.org>

> 212-585-6533
>
>
>
> -----Original Message-----
> From: Perugini, Julien C. (IntlAssoc) [mailto:julien....@nist.gov]
> Sent: Wednesday, August 03, 2016 11:17 AM
> To: Shaun Joseph; McCaffrey, Andrew B. (Fed);
> 'transport-t...@googlegroups.com'
> Cc: Virginia G. Lorenzi
> Subject: RE: Local installation help needed
>
> Hello,
>
> If you are looking to set up the environment for TTT tool you need to
> have the external cache folder.
> You can find it here
> https://bitbucket.org/jperugini/ett/downloads/external_cache.zip
> Once this is unzipped on your system you need to go to Toolkit
> Configuration and set the property for the external to point to this folder.
>
> Julien
>
> -----Original Message-----
> From: transport-t...@googlegroups.com
> <mailto:transport-t...@googlegroups.com>
> [mailto:transport-t...@googlegroups.com] On Behalf Of Shaun Joseph
> Sent: Wednesday, August 03, 2016 9:57 AM
> To: McCaffrey, Andrew B. (Fed) <andrew.m...@nist.gov

> <mailto:andrew.m...@nist.gov>>;
> 'transport-t...@googlegroups.com'
> <transport-t...@googlegroups.com
> <mailto:transport-t...@googlegroups.com>>
> Cc: Virginia G. Lorenzi <vlor...@nyp.org <mailto:vlor...@nyp.org>>

> Subject: RE: Local installation help needed
>
> Andrew,
> I honestly don't know the differences in the versions you are referring
> to. Ultimately, what I want is a replica of the web based version to run
> on my local PC. Can you assist with that? I can show you how far we've
> gotten and maybe you can tell me if I am missing a file or if a setting
> is off etc. Let me know if you have time and I can attempt to set up a call.
> Thanks,
>
> Shaun Joseph

> shj...@nyp.org <mailto:shj...@nyp.org>

> 212-585-6533
>
>
>
> -----Original Message-----
> From: Andrew McCaffrey [mailto:andrew.m...@nist.gov]
> Sent: Wednesday, August 03, 2016 9:54 AM
> To: Shaun Joseph; 'transport-t...@googlegroups.com'
> Cc: Virginia G. Lorenzi
> Subject: Re: Local installation help needed
>
> Hi,
>
> Is this for C-CDA R2.1 or C-CDA R1.1 (or both)?
>
> -Andrew
>
> On 08/01/2016 06:17 PM, Shaun Joseph wrote:
>> Hi Andrew,
>> I am seeking to install the C-CDA Message Validator to validate CCDA transmissions and the information content needed for a successful transmission.
>> Thanks,
>> Shaun Joseph

>>shj...@nyp.org <mailto:shj...@nyp.org>

>> 212-585-6533
>>
>>
>>
>> -----Original Message-----
>> From: Andrew McCaffrey [mailto:andrew.m...@nist.gov]
>> Sent: Monday, August 01, 2016 6:13 PM
>> To: Shaun Joseph; 'transport-t...@googlegroups.com'
>> Cc: Virginia G. Lorenzi
>> Subject: Re: Local installation help needed
>>
>>
>> Hello,
>>
>> Which portions of the tooling are you planning to use? Depending on
>> your use case, it may make more sense to install the Edge Testing Tool
>> (ETT) as that has incorporated virtually all of the features that were in the TTT.
>>
>> -Andrew
>>
>> On 08/01/2016 04:58 AM, Shaun Joseph wrote:
>>> Hello group,
>>>
>>> Would someone be able to assist me in fully installing this tool
>>> locally? I was able to install partially but I am having difficulty
>>> with selecting any environment options and as such I am not seeing
>>> choices for CCDA document validation. Please see attached for
>>> screenshots of the web based tool versus my local installation.
>>> Please advise on the steps I need to take further. Please feel free to email or call me.
>>>
>>> Thanks,
>>>
>>> *Shaun Joseph, MS*
>>>
>>> Programmer Analyst
>>>

>>>shj...@nyp.org <mailto:shj...@nyp.org> <mailto:shj...@nyp.org>

>>>
>>> 212-585-6533
>>>
>>> Description: Description: Impact Team 2.jpg
>>>
>>> *NewYork-Presbyterian Hospital*
>>>
>>> *Information Systems*
>>>
>>> ---------------------------------------------------------------------
>>> -
>>> -- This electronic message is intended to be for the use only of the
>>> named recipient, and may contain information that is confidential or
>>> privileged. If you are not the intended recipient, you are hereby
>>> notified that any disclosure, copying, distribution or use of the
>>> contents of this message is strictly prohibited. If you have received
>>> this message in error or are not the named recipient, please notify
>>> us immediately by contacting the sender at the electronic mail
>>> address noted above, and delete and destroy all copies of this message. Thank you.
>>> code:d34y
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Transport Testing Tool" group.
>>> To unsubscribe from this group and stop receiving emails from it,

>>> send an email totransport-testin...@googlegroups.com
> <mailto:transport-testing...@googlegroups.com>
>>> <mailto:transport-testing...@googlegroups.com>.
>>> For more options, visithttps://groups.google.com/d/optout.

>
> --
> You received this message because you are subscribed to the Google
> Groups "Transport Testing Tool" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to transport-testing...@googlegroups.com
> <mailto:transport-testing...@googlegroups.com>.
> For more options, visit https://groups.google.com/d/optout.
>

> ------------------------------------------------------------------------