Thanks,
Jim Mulvany
See the FAQs on the site: http://www.gpskevinadventurerides.com/home/faq-s
Q: How do I check my GPS to see if the Ride Map on the MicroSD Card is working?
A: There are two ways you can check your GPS.
See the trail on the GPS yourself. Turn on the GPS and zoom out to about 50 or 30 miles. Use the cursor to pan over to an area where you know the trail should be. Now begin zooming in. Wait for the gps to refresh it's screen as they can be slow. As you zoom in, you should see the trail as a Wide Bold Blue line made up of arrows. OK, good job, you did it right.
Check to see if the map is in the GPS unit's memory: The steps to do this vary depending on which Garmin gps unit you have (and there are hundreds). Most work like this:
Option 1: From the "Map" page select Menu. Then select "Setup Map" then scroll down and select "Select Map." Now you can scroll down and read the maps in your unit. You should find a map called "TAT gpskevin." Make sure it is enabled and you are done!
Option 2: Some GPS units (like Nuvi's) work like this. Select "Settings" then "Maps" then "Info" and now you should find the map "TAT gpskevin." Make sure that it is checked and you're done.
Option 3: Some work like this. Select "Tools" then "Settings" then "Map" then "Map Info." You should find the map "TAT gpskevin." Make sure that it is checked and you're done.
Again, your gps may have a different way to access the maps, but the microSD Card does work in all Garmin gps units with a card slot. Sorry, there are just too many Garmin gps units for me to go through them all.