Boeing 777-300 Pia

[Gabby Dreher]

TheBoeing 777's unique combination of superior range, outstanding fuel efficiency and passenger-preferred comfort has created long-range success for carriers around the world. And the 777-300ER now gives operators a perfect opportunity to extend that success. Recent upgrades further reduce costs and boost revenue, and the 777's flying experience is still number one with passengers. A more profitable fleet and more satisfied passengers. That's a better way to fly.

The Boeing 777, commonly referred to as the Triple Seven, is an American long-range wide-body airliner developed and manufactured by Boeing Commercial Airplanes. The 777 is the world's largest twinjet and the most-built wide-body airliner.The jetliner was designed to bridge the gap between Boeing's other wide body airplanes, the twin-engined 767 and quad-engined 747, and to replace aging DC-10 and L-1011 trijets. Developed in consultation with eight major airlines, the 777 program was launched in October 1990, with an order from United Airlines. The prototype was rolled out in April 1994, and first flew in June. The 777 entered service with the launch operator United Airlines in June 1995. Longer-range variants were launched in 2000, and first delivered in 2004.

As of 2018[update], Emirates was the largest operator with a fleet of 163 aircraft. As of June 2024[update], more than 60 customers have placed orders for 2,279 Triple Sevens across all variants, of which 1,734 have been delivered. This makes the 777 the best-selling wide-body airliner, while its best-selling variant is the 777-300ER with 837 aircraft ordered and 832 delivered. The airliner initially competed with the Airbus A340 and McDonnell Douglas MD-11; since 2015 it has mainly competed with the Airbus A350 and later also with the A330-900. As of May 2024[update], the 777 has been involved in 31 aviation accidents and incidents, including five hull loss accidents out of eight total hull losses with 542 fatalities including one ground casualty.

In the early 1970s, the Boeing 747, McDonnell Douglas DC-10, and the Lockheed L-1011 TriStar became the first generation of wide-body passenger airliners to enter service.[4] In 1978, Boeing unveiled three new models: the twin-engine or twinjet Boeing 757 to replace its 727, the twinjet 767 to challenge the Airbus A300, and a trijet 777 concept to compete with the DC-10 and L-1011.[5][6][7] The mid-size 757 and 767 launched to market success, due in part to 1980s' extended-range twin-engine operational performance standards (ETOPS) regulations governing transoceanic twinjet operations.[8] These regulations allowed twin-engine airliners to make ocean crossings at up to three hours' distance from emergency diversionary airports.[9] Under ETOPS rules, airlines began operating the 767 on long-distance overseas routes that did not require the capacity of larger airliners.[8] The trijet 777 was later dropped, following marketing studies that favored the 757 and 767 variants.[10] Boeing was left with a size and range gap in its product line between the 767-300ER and the 747-400.[11]

By the late 1980s, DC-10 and L-1011 models were expected to be retired in the next decade, prompting manufacturers to develop replacement designs.[12] McDonnell Douglas was working on the MD-11, a stretched successor of the DC-10,[12] while Airbus was developing its A330 and A340 series.[12] In 1986, Boeing unveiled proposals for an enlarged 767, tentatively named 767-X,[13] to target the replacement market for first-generation wide-bodies such as the DC-10,[9] and to complement existing 767 and 747 models in the company lineup.[14] The initial proposal featured a longer fuselage and larger wings than the existing 767,[13] along with winglets.[15] Later plans expanded the fuselage cross-section but retained the existing 767 flight deck, nose, and other elements.[13] However, airline customers were uninterested in the 767-X proposals, and instead wanted an even wider fuselage cross-section, fully flexible interior configurations, short- to intercontinental-range capability, and an operating cost lower than that of any 767 stretch.[9]

Airline planners' requirements for larger aircraft had become increasingly specific, adding to the heightened competition among aircraft manufacturers.[12] By 1988, Boeing realized that the only answer was a clean-sheet design, which became the twinjet 777.[16] The company opted for the twin-engine configuration given past design successes, projected engine developments, and reduced-cost benefits.[17] On December 8, 1989, Boeing began issuing offers to airlines for the 777.[13]

Alan Mulally served as the Boeing 777 program's director of engineering, and then was promoted in September 1992 to lead it as vice-president and general manager.[18][19] The design phase of the all-new twinjet was different from Boeing's previous jetliners, in which eight major airlines (All Nippon Airways, American Airlines, British Airways, Cathay Pacific, Delta Air Lines, Japan Airlines, Qantas, and United Airlines) played a role in the development.[20] This was a departure from industry practice, where manufacturers typically designed aircraft with minimal customer input.[21] The eight airlines that contributed to the design process became known within Boeing as the "Working Together" group.[20] At the group's first meeting in January 1990, a 23-page questionnaire was distributed to the airlines, asking what each wanted in the design.[9] By March 1990, the group had decided upon a baseline configuration: a cabin cross-section close to the 747's, capacity up to 325 passengers, flexible interiors, a glass cockpit, fly-by-wire controls, and 10 percent better seat-mile costs than the A330 and MD-11.[9]

Major assembly of the first aircraft began on January 4, 1993.[37] On April 9, 1994, the first 777, number WA001, was rolled out in a series of 15 ceremonies held during the day to accommodate the 100,000 invited guests.[38] The first flight took place on June 12, 1994,[39] under the command of chief test pilot John E. Cashman.[40] This marked the start of an 11-month flight test program that was more extensive than testing for any previous Boeing model.[41] Nine aircraft fitted with General Electric, Pratt & Whitney, and Rolls-Royce engines[39] were flight tested at locations ranging from the desert airfield at Edwards Air Force Base in California[42] to frigid conditions in Alaska, mainly Fairbanks International Airport.[43] To satisfy ETOPS requirements, eight 180-minute single-engine test flights were performed.[44] The first aircraft built was used by Boeing's nondestructive testing campaign from 1994 to 1996, and provided data for the -200ER and -300 programs.[45]

At the successful conclusion of flight testing, the 777 was awarded simultaneous airworthiness certification by the US Federal Aviation Administration (FAA) and European Joint Aviation Authorities (JAA) on April 19, 1995.[39]

Boeing delivered the first Triple Seven to United Airlines on May 15, 1995.[46][47] The FAA awarded 180-minute ETOPS clearance ("ETOPS-180") for the Pratt & Whitney PW4084-engined aircraft on May 30, 1995, making it the first airliner to carry an ETOPS-180 rating at its entry into service.[48] The first commercial flight took place on June 7, 1995, from London Heathrow Airport to Dulles International Airport near Washington, D.C.[49] Longer ETOPS clearance of 207 minutes was approved in October 1996.[a]

On November 12, 1995, Boeing delivered the first model with General Electric GE90-77B engines to British Airways,[50] which entered service five days later.[51] Initial service was affected by gearbox bearing wear issues, which caused British Airways to temporarily withdraw its 777 fleet from transatlantic service in 1997,[51] returning to full service later that year.[42] General Electric subsequently announced engine upgrades.[42]

The first Rolls-Royce Trent 877-powered aircraft was delivered to Thai Airways International on March 31, 1996,[50] completing the introduction of the three powerplants initially developed for the airliner.[52] Each engine-aircraft combination had secured ETOPS-180 certification from the point of entry into service.[53] By June 1997, orders for the 777 numbered 323 from 25 airlines, including satisfied launch customers that had ordered additional aircraft.[39] Operations performance data established the consistent capabilities of the twinjet over long-haul transoceanic routes, leading to additional sales.[54] By 1998, the 777 fleet had approached 900,000 flight hours.[55] Boeing states that the 777 fleet has a dispatch reliability (rate of departure from the gate with no more than 15 minutes delay due to technical issues) above 99 percent.[56][57][58][59]

After the baseline model, the 777-200, Boeing developed an increased gross weight variant with greater range and payload capability.[60] Initially named 777-200IGW,[61] the 777-200ER first flew on October 7, 1996,[62] received FAA and JAA certification on January 17, 1997,[63] and entered service with British Airways on February 9, 1997.[63] Offering greater long-haul performance, the variant became the most widely ordered version of the aircraft through the early 2000s.[60] On April 2, 1997, a Malaysia Airlines -200ER named "Super Ranger" broke the great circle "distance without landing" record for an airliner by flying eastward from Boeing Field, Seattle to Kuala Lumpur, a distance of 10,823 nautical miles (20,044 km; 12,455 mi), in 21 hours and 23 minutes.[55]

Following the introduction of the -200ER, Boeing turned its attention to a stretched version of the baseline model. On October 16, 1997, the 777-300 made its first flight.[62] At 242.4 ft (73.9 m) in length, the -300 became the longest airliner yet produced (until the A340-600), and had a 20 percent greater overall capacity than the standard length model.[64] The -300 was awarded type certification simultaneously from the FAA and JAA on May 4, 1998,[65] and entered service with launch customer Cathay Pacific on May 27, 1998.[62][66]

3a8082e126