Usb Sc09 Fx Driver 96

0 views

Skip to first unread message

Message has been deleted

Raiquen Courcelle

unread,

Jul 17, 2024, 8:19:31 PM7/17/24

to tranalceppa

USB SC09 FX Driver 96: A Guide for Mitsubishi PLC Users

If you are a user of Mitsubishi PLCs, you may have encountered the need to connect your PC to the PLC via a USB cable. This can be useful for programming, debugging, monitoring, or data transfer purposes. However, not all USB cables are compatible with Mitsubishi PLCs. In this article, we will introduce the USB SC09 FX Driver 96, a software that allows you to use a USB SC09 FX cable to communicate with your Mitsubishi PLCs.

Usb Sc09 Fx Driver 96

Download Zip https://urloso.com/2ySIsU

What is the USB SC09 FX cable?

The USB SC09 FX cable is a special cable that can connect your PC to a Mitsubishi PLC via a USB port. It has a USB connector on one end and a round 8-pin connector on the other end. The round 8-pin connector can be plugged into the RS422 port of the PLC. The USB SC09 FX cable is compatible with FX series PLCs, such as FX0N, FX1N, FX2N, FX3U, and FX3G. It can also replace the FX-232AW module and support long distance communication.

What is the USB SC09 FX Driver 96?

The USB SC09 FX Driver 96 is a software that allows you to use the USB SC09 FX cable to communicate with your Mitsubishi PLCs. It is a driver that creates a virtual COM port on your PC and assigns it to the USB SC09 FX cable. This way, you can use any software that supports serial communication, such as GX Developer, GX Works2, or GX Works3, to access your PLC via the virtual COM port .

How to install and use the USB SC09 FX Driver 96?

To install and use the USB SC09 FX Driver 96, you need to follow these steps:

Download the USB SC09 FX Driver 96 from [this link] or [this link]. The file name is USB_SC09_FX_Driver_96.zip.

Extract the zip file to a folder on your PC.

Plug the USB SC09 FX cable into your PC and wait for Windows to detect it.

Open the Device Manager and find the device named USB Serial Converter under Universal Serial Bus controllers.

Right-click on the device and select Update driver.

Select Browse my computer for driver software and then select Let me pick from a list of available drivers on my computer.

Select Have Disk and then browse to the folder where you extracted the zip file.

Select the file named usb_sc9.inf and click Open.

Click OK and then click Next.

Wait for Windows to install the driver and then click Finish.

Open the Device Manager again and find the device named USB Serial Port under Ports (COM & LPT).

Right-click on the device and select Properties.

Select the Port Settings tab and then click Advanced.

Select a COM port number from the drop-down list. Make sure it is not used by any other device. You can also change other settings such as baud rate, parity, data bits, stop bits, and flow control according to your PLC configuration.

Click OK twice to save the settings.

You have successfully installed and configured the USB SC09 FX Driver 96. You can now use any software that supports serial communication to access your PLC via the virtual COM port you selected.

Conclusion

The USB SC09 FX Driver 96 is a useful software that allows you to use a USB SC09 FX cable to communicate with your Mitsubishi PLCs. It is easy to install and use, and it works with any software that supports serial communication. With this software, you can program, debug, monitor, or data transfer your PLCs without any hassle.