Siemens Acuson X300 Manual Pdf

0 views

Skip to first unread message

Jesper Sahu

unread,

Aug 4, 2024, 8:35:20 PM8/4/24

to tradalcepdong

Ihave a problem in Ultrasound Siemens Acuson Model X-300 not finished booting. Enough to show the working screen and displays the message in the lower left corner: "STARTING DIMAQ ..." and not the program finishes loading. This screen is locked. Do not respond to any keyboard command unless the power off the system. Does anyone have the service manual for this equipment.

The cause of this is probably corrupted software or a failure of the hard drive. Check the LED for the HDD on the back of the system above the USBs. It should be on or flashing. If not, check connections to the hard drive and try again. This is sometimes caused by the BE board, which controls the HD function. Start with trying to load software, as this is the most likely to fix the problem, then try the HD.

If you need technical support, or to get quotes on parts or probes, please send the email to: Servi...@auetulsa.com. That goes to everyone on our service team and will help ensure a response in case I am traveling or at a customer site.

Can someone send me the x300 manual? I am trying to connect an x300 to two pc's s we can transfer patient images and records. A google drive share would be the most efficient if possible. Jeff.m...@gmail.com

My system x300, when powered on, it turns on for around 2secs then turns off, no time to even display anything. Some rare times it works fine, shows fan error. ignored and all ok. When i check the output at DC-DC board test points, all voltage seems to work fine except TP5 PSRTRXVO, i dont know what that means it measured 0v. Main PSU warning LED no light, only power green LED blink slowly. Can you send me service manual please to muan...@gmail.com . Repair tip will also be helpful. I have removed TI and RC board, problem not solved, it still shuts down

The Color Doppler knob will not press down to turn it on. It turns as for the gain only. I've popped the knob off and back on, didn't help. I'm wondering if I should try using some vice grips to pull up on it.