How To Create Ribbon In Illustrator

[Melissa Russian]

Iam attempting to recreate the logo attached to this thread (in order to modernize it). I would like to know if anyone could give me a resource to help me create the ribbon at the bottom. I have found a tonne of resources on how to insert a ribbon. I have also found them in my symbols library. However, the ribbon has to be as close to the original logo's ribbon as possible (with the wrap in, followed by the curl at the tail end of the ribbon). I have searched high and low to find a stock ribbon online, but none of them quite look right. So I am thinking I need to create it from scratch and just want to know if anyone can direct me in how to do this (or point me in the direction of how to do this).

Save your custom ribbon as a graphic style so you can use it again in future projects. To do this, select the ribbon and go to the Graphic Styles panel (Window > Graphic Styles) and click on "New Graphic Style".

Making a ribbon is just like creating any other shape in Adobe Illustrator. Meaning, it starts from the basic shapes like a rectangle. Make a couple of copies, and combine shapes to create a new one. Or you can actually make a twisted ribbon from a line.

It only takes two steps to create a twisted ribbon in Adobe Illustrator. All you need to do is to draw a line and apply a 3D effect to the line. And actually, you can use this method to make a 3D ribbon too.

Now you should know how to create different types of ribbon banners and twisted ribbons. When you make a ribbon banner, make sure that your shapes are created properly using the Shape Builder Tool, otherwise, you might run into problems coloring the different parts.

Blending can be used to make a straight ribbon. One can create the length and the width by applying 2 blendings. But trying to make a curved one by creating the width with another blending unfortunately creates something which is very difficult to predict exactly. At least the final perspective should be seen in the beginning when creating the length.

In image 1 there's some dots. The idea is to make the distant dots smaller and to have more grey color to reduce their contrast. In image 1 the dots are zoomed to bigger size to show them properly here.

One can think "of course in 3D it will be better". Questioner's original example has finely fading contrast and dot size. The ribbon has a slight curvature sideways. In simple 3D programs making them is difficult. Leaving them out destroys the effect, it's like an engineering drawing. An example:

At this point, you want to change the color of one of the circles. That new color should also be applied to one of the intersecting shapes. The other intersecting shape should stay the same as the original color. You end up with two circles that look like they are linked together like this:

I created this simple hello using the blob brush tool and wanted to weave a ribbon through it. We are going to start by selecting both hello and the ribbon. We will do the same thing we did with the two circles by going to the pathfinder panel and dividing hello and the ribbon. Find all of the intersecting shapes that were just cut out with the divide tool.

In the picture above I have highlighted 7 intersecting shapes. Take every other intersecting shape and change its colors to match the colors of the object you want to weave your shape in and out of. In this case, I want the ribbon to weave in and out of the hello so every other intersecting shape should be black. The end product should look something like this:

Now that you know how to create this effect in Illustrator, the possibilities are endless to what you can do with this tutorial. If you do use this tutorial I would love to see it. You can either post your artwork in the comments down below or post it on Instagram and tag me.

Tags: Adobe Illustrator, adobe ilustrator tutorial, illustrator tutorials, graphic design, how to draw ribbon, how to, graphic design tutorials, illustrator cc tutorial, how to design logo, graphic design tutorial, illustrator cc, vector illustration, graphic designer, design tutorial, flat design, illustrator tutorial for beginners, adobe creative cloud, illustrator tutorial for beginner, tutvid, nathaniel dodson, AI

Draw ribbons #1-#5 and also talk about drawing ribbons in halves and reflecting and also talk about the warp effect to make one ribbon tons of ribbons (also things like the Wrinkle tool to add textured edges).

This is one of the coolest tools in the adobe illustrator. You can use it anywhere because this technique is very good and save a lot of time as well. Ribbons are used in any way such as decoration or sometimes to display on it. In adobe illustrator ribbons are also used for the retro logo or for the badge as or to represent someone tag that you want to show on it. They are created with the simple use of pen tool and rectangle but with the help of warp tool you can change the appearance of the ribbon in any way as I have shown in the above image

You can easily apply an opacity mask to a group by selecting all the shapes, making it a group (Cmd/Ctrl+G) and clicking Make Mask in the transparency panel. By default, it applies a black mask that hides everything, but by clicking on Clip in the transparency panel, this changes to white and instead shows everything.

Shading helps to create a 3D illusion of the ribbon folding. Watch Martin as he explains how to copy the shapes you want to shade, and use the shape builder tool to merge the shapes into a single path. Once you apply the gradient to this new shape, you can easily adjust the angle and length of the gradient to get the effect you want. Using the eyedropper tool allows you to repeat this process on other shapes quickly.

This short tutorial demonstrates the simplest way of creating Ribbons/ banners in Adobe Illustrator. This easy to follow tutorial helps you understand the steps involved in creating ribbons/ banners from scratch in illustrator. After watching this tutorial you will be able to create your own ribbons/ banner in a very short amount of time.

This project requires students to have a clear plan for their whole book before starting. Because of this, I created planning sheets that helped them to hone their ideas. Students could choose people, places, animals, or objects. They then had to come up with lists of ten adjectives, ten verbs, and ten emotions. Finally, the students had to sketch out ideas for images based on their subject choice and one of the lists. They also needed to come up with a book title and design for the book cover. I did allow some students to deviate from the original list categories as long as I approved their ideas.

When it came to the digital media, I allowed students to use copyright-free photos as source images, but I encouraged them to add embellishments that changed the original image. They needed to save each of their source photos in a folder for quick access before they started. This was the final step in the planning process before jumping into Adobe Illustrator.

The source image should be placed on a layer above the rounded rectangle. In the transparency window, students should lower the opacity of the source image to between 40%-60% so that they can see through to the black background. Students should then lock both of the layers and create a new layer on top of the source image in which to draw their designs.

Students should use their pencil tool with a white stroke and an organic or curvy width profile to get the best look. I encouraged them to work no larger than a 1-point width. Students needed to make sure that they created a clear image of the subject but I also encouraged them to look at ways they could add the feeling of texture and variety. On top of that, they could alter the images in ways to add more interest to the overall design. They also needed to think about how each composition was working individually and as a part of the larger book. Each image also needs to have a word associated with it. The word can be typed using a font that contributes to the printmaking feel or they could write the words using the pencil tool.

Students should fold the paper, taking extreme care to make sure that the folds are straight and even. The folds should alternate back and forth creating the accordion look. This should result in 11 boxes that each measure 2.5 inches x 2.5 inches. If the book has been folded correctly, the student should then go back and erase any visible pencil marks.

Once the book and cover are dry, we can start to put all of the pieces together. First fold up the book into a tight accordion. Take two pieces of ribbon and lay them across the front and back of the book horizontally so that there is enough ribbon to tie on either side of the book. Use school glue (or a glue stick) to glue the ribbon down to the front and back of the paper book. Then use hot glue to glue the front cover to the front of the book, sandwiching the ribbon between the paper and the book cover. Do this on the back of the book as well. Once the glue has dried, students should be able to tie both ends of the book to keep it shut. They can also untie one side to flip through the designs or untie both sides to expand the book and display all of their designs.

This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are as essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.

Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.

3a8082e126