Windows 7 All Error Fix
Brook Mithani
I am using remote desktop server SAS9.4. When I open my SAS today, there is an error message in the log "Windows error code: 67 in hx_disk_access for \\tsclinent\N\xxxxx". The folder directory is not exist at all. It didn't impact me running the program, but it doesn't look right with an ERROR sitting in the log file. Did anyone experience this before? Any solutions?
This may be related to how your remote desktop software maps local drives into the remote session (if it does that at all). Have a look at This artcle does mention another error code but is seems close enough. It can tell you how to find out what drive is causing this error. Apparently it is not a very critical drive as it does not impair the working of SAS.
For long time, I'm trying to add my Gmail account to Microsoft Mail app on Windows 10. Every time I tried to add Gmail account, a error code 0x80070490 always brought up. I've researched online on this error code matter but nothing drastically troubleshooting steps found and no response directly from Windows Team on error code. Here are the steps that I've already performed on my computer multiple time's which also includes after every major updates of Windows 10. Note: When signing into my Gmail account, I give full access to access my account and when the app tried to access the account, that's when I get error code appear.
@p4sh4 losing my freaking mind with this too, I've got a laptop where I used my mail normally. yesterday my new laptop arrived and when I tried to log in, that error again and again and again, tried everything, loged off from everywhere, still nothing. I can't log with my two google accounts which I need because college and nothing, but the worse is that I can log normally into outlook but i just don't want to, I want Mail app
@p4sh4 losing my cracking psyche with this as well, I have a PC where I utilized my mail regularly. recently my new PC showed up and when I attempted to sign in, that mistake over and over and once more, had a go at everything, loged off from all over, as yet nothing. I can't log with my two google accounts which I need since school and nothing, yet the more awful is that I can log ordinarily into standpoint however I simply don't have any desire to, I need Mail application
Visit here: -0x80070490-mail-app-in-Windows
Thank you for reaching out.I recommend contacting the school administrator who added the Windows digital license.Check to see if you have administrator privileges on this computer.
Please accept my best wishes.
My question is essentially the same as:
-build-error/21744
I even went through the same steps as @Al_Sherif_Ahmed_Khal
And receive the same error message.
ValidationError: Invalid configuration object. Webpack has been initialized using a configuration object that does not match the API schema.
After muddling through the WSL setup process and getting oh-so-close to it working but not quite, I very much appreciate you sharing your non-WSL-required version of Sage! I will be giving that a try as soon as I have some time Thank you!
I recently upgraded to Windows 10 Version 2004, via the Slow Ring of the Windows Insiders programme. About a day later, I noticed that my computer is significantly slowed down and things like right-clicking on folders (but not files) takes a very long time. I checked the running processes and sure enough, the Windows Error Reporting Service was frequently consuming between 30-100% of my CPU:
Based on the little I've been able to find on this I'm assuming that this is a fairly new bug exclusive to Insiders, and with error reporting not being particularly useful for the day-to-day operation of my system I decided the best way to deal with it would be to disable the Error Reporting Service until the bug has been resolved.
The following list describes system error codes (errors 0 to 499). They are returned by the GetLastError function when many functions fail. To retrieve the description text for the error in your application, use the FormatMessage function with the FORMAT_MESSAGE_FROM_SYSTEM flag.
Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator.
You were not connected because a duplicate name exists on the network. If joining a domain, go to System in Control Panel to change the computer name and try again. If joining a workgroup, choose another workgroup name.
Hello ,
Im running nextcloud 15 (non snap version) everything works perfectly but i wanted to use the webdav mount point feature in windows.
It works perfectly OUT of the local network of my nextcloud server with :
So I'm tackling this machine-learning problem (from a previous Kaggle competition for practice: -taxi-trip-duration) and I'm trying to use XGBoost but getting an error which I have no clue how to tackle. I searched on google and stack overflow but couldn't find anyone with a similar problem.
I'm using python 2.7 with the Spyder IDE through Anaconda and I'm on Windows 10. I did have some trouble installing the xgboost package so I won't completely erase the idea that it could be an installation error. However I'm also doing a Udemy course on ML and I was able to use xgboost just fine with a small dataset and I'm using the same functions.
OK. So I was resetting my HP laptop. It was just a normal reset cause I wanna keep it but get rid of the junk on it. Well that all went fine, it loaded the reset screen and got to 100% and everything. Well after it restarted and was about to finish the reset and windows installation my little niece went and powered it off (cause she thought that is was broken and needed to be turned on and off again) (she's 12) well after I turned it back on it says "install windows" "the computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation" OK well I did that several times and I'm out of ideas now
1) May I have the exact model name of the product? Refer to this document for steps to find the product details. Do not share any of your personal information such as serial, phone number, email ID, etc.
Hi Eva,
it has been a while since i first encountered this problem. In the meantime i have found solution i think. This error might be caused by the setting in the Panel for the TRNSYS folder. There it should state your local path of the TRNSYS folder like "c:\TRNSYS18", instead of "c:\TRNLizard"
Taken at face value, you're having trouble with an Apple Application Support program file. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Next, I then tried uninstallation procedure, verify uninstallation procedure and reboot. I then ran the Repair option for .NET and rebooted. I finished that off with a reinstallation procedure. That did not work for me.
That worked. After I removed that persistent registry key the installation was successful and iTunes is now running on my PC successfully. Glad I found these forums and I was not the only one having this problem.
I now find I had the same registry entry hanging on, despite uninstalling & wiping everything again and again. Having now deleted this key, (I don't even have an iPod), & iTunes 11.1.14 now opens at long last.
I just went into Control Panel - then System and Security - then Review your computers status - then Recovery. Go to the restore point prior to trying to do the update. This does not delete any files(movies, music etc). Worked fine for me
I was traveling to Mexico and I went to open I-Tunes on the plane and that error message came up. After reading many posts, I thought I was going to have to spend hours trying to fix this problem while on vacation. I am so happy I kept on reading and found richardsealy's post!!
I tried installing telegraf as windows service, on invoking the Telegraf service from services manager, received process terminated error - 1067. and there is no much info on windows event logger too.
I have recorded the web based application and initialy I got 401 (Unauthorised) issue. I have selected the "Wininet replay insteda of sockets (Windows only) option. It has resolve this issue but I am getting the another error at the end of the script:
HttpSendRequest time out only occurres when any transaction takes more than 30 sec to connect to server. This default 30 sec time is because of the use of WinInet Replay engine. Thus this error pops up when you are running script with winInet replay and transactions are taking more than 30 sec.
In here I am getting the error like "401" but this will pass if I use "winInet instead of socket". But at the end of the script I am getting the error like "HttpSendRequest failed, Windows error code=12002 and retry limit (0) exceeded for URL". I have noticed that the application takes more tha 30 sec and it causes the failure of script. But I would like to know how overcome this issue.
When I checked in the forum, I found its required krb5.ini file and need to place it in the C:\Windows folder. Should I request this file from the application server team or this file can be created by us?
Thanks a lot for all your support on this thread. It really helps me to understand the issue. I have contacted the application team and ask them to create user to login into the application instead of using NTLM authentication. It resolves the problem but anyhow the document which you have shared is really good.
I am extremely frustrated with Docker Hub at the moment and have done everything to try to login to Docker from my Windows Home PC. This worked 100% a few weeks ago, but all of a sudden get the error the following error message:
Error response from daemon: Get -1.docker.io/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)