Prop for 30'

[David M. Smith]

I have a 1985 30' Sport Cruiser with 2 Crusader engines. Does anyone have RPM/Speed graph? Any recommended prop specs?

Thanks,

Dave Smith

----------------------------------------------

David M. Smith, CFP®
CEO
Intervest International Inc., Registered Investment Advisor

Broker/Dealer:
Intervest International Equities Corporation, Member FINRA/SIPC
1980 Dominion Way, Suite 202, Colorado Springs, CO  80918

Office: (719) 592-9299      Direct: (719) 440-2600
Fax: (719) 592-9329

The information contained in this communication and any document attached to or transmitted herewith is privileged, business, or otherwise confidential and intended for the exclusive use of the individual or entity named above.  If the reader of this message is not the intended recipient or the employee or agent responsible for delivering it to the intended recipient, you are hereby notified that any examination, use, dissemination, distribution, or copying of this communication or any part thereof is strictly prohibited.  If you have received this communication in error, please immediately notify the sender by telephone or reply e-mail toComp...@intervestintl.com and destroy this communication.  If you no longer want to receive email communications, please email us at Opt...@intervestintl.com.  Thank you.

@intervestintl.com

[John Maring]

Dave,

I have the same boat but fortunately I can not tell you the pitch. It has a cup on the outer edge and I think it helps on the higher speeds.

The down side is that at 2,500 to 3,000 RPM the boat will chime walk. By that I mean it becomes unstable in diving from side to side and trying to control it by the trim tabs will not elevate the problem.

When the boat comes out of the water this fall, end of September, I will measurer both props for the diameter and let you know.

By the way, do you have the single hatch cover over the engines? I could not reach the outboard side of the engines to change the plugs until I cut in a West Marine hatch cover into the outside of the deck. A real pain.

I have also installed MSD distributors removing the old points system, which became a real problem with keeping them in timing.

 

Thanks

John Maring

616 450 1599 Cell

 

 

 

--
You received this message because you are subscribed to the Google Groups "Tollycraft" group.
To post to this group, send email to tollycra...@googlegroups.com.
To unsubscribe from this group, send email to tollycraftyach...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/tollycraftyachts?hl=en.

[schedl...@comcast.net]

Wrong dave-sold my boat

Sent on the Sprint® Now Network from my BlackBerry®

---

From: "John Maring" <jwma...@sbcglobal.net>

Sender: tollycra...@googlegroups.com

Date: Wed, 17 Aug 2011 09:26:52 -0400

To: <tollycra...@googlegroups.com>

ReplyTo: tollycra...@googlegroups.com

Subject: RE: Prop for 30'

[David M. Smith]

John

I have a single hatch cover and can pretty well get at all parts.

Replaced both distributors this year as well.

Thanks for the prop info when you can get to it.

Dave

----------------------------------------------

David M. Smith, CFP®
CEO
Intervest International Inc., Registered Investment Advisor

Broker/Dealer:
Intervest International Equities Corporation, Member FINRA/SIPC
1980 Dominion Way, Suite 202, Colorado Springs, CO  80918

Office: (719) 592-9299      Direct: (719) 440-2600
Fax: (719) 592-9329

The information contained in this communication and any document attached to or transmitted herewith is privileged, business, or otherwise confidential and intended for the exclusive use of the individual or entity named above.  If the reader of this message is not the intended recipient or the employee or agent responsible for delivering it to the intended recipient, you are hereby notified that any examination, use, dissemination, distribution, or copying of this communication or any part thereof is strictly prohibited.  If you have received this communication in error, please immediately notify the sender by telephone or reply e-mail toComp...@intervestintl.com and destroy this communication.  If you no longer want to receive email communications, please email us at Opt...@intervestintl.com.  Thank you.

@intervestintl.com