Emblem

[Chris Hartsfield]

I am trying to find a Tollycraft emblem for the front of my 26. I know they are probably impossible to come by.

I was wondering if anyone knows of a place that might be able to 3D print?

Chris

[dan leenhouts]

I'm not aware of any emblem that goes on the front. The plastic side emblems towards the back of the cabin I believe the club has some for sale. If you just want to have a stick on one like everybody else  Prisim Graphics in Seattle
probably should  have the program to make you some.

--
You received this message because you are subscribed to the Google Groups "Tollycraft Boating Club Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tollycraft-boating-c...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/tollycraft-boating-club-forum/ee7b29e8-3ca1-4e23-a218-9bda7710f9c7n%40googlegroups.com.

[Douglas Wise]

I'm having Prism Graphics https://www.prismgraphics.com/ make me three all chrome (silver) emblems.  I think they will start offering sets of three since the older Tolly's had three.  Not sure if they'll make the chrome as a standard product as well.

To view this discussion on the web visit https://groups.google.com/d/msgid/tollycraft-boating-club-forum/CAMK3Y7ZA0r8Wmt4NRv4Zz3NG2%3DKidNw0MMSuXeAUiOFghfd7wA%40mail.gmail.com.

[psponlinebizaccount]

I've been trying to get one from the club for three years. The rumor is they have some, but I've never been able to get a clear answer in spite of many attempts. There were some at the RH rendezvous, and I think  a kind group member grabbed me one. Fingers crossed.

[Brian Edmondson]

Chris, when you say emblem I'm not sure if you're talking about a decal or the Tolycraft symbol?  Where does it mount? And is that location a flat surface? I have the tallykraft emblem that goes on the side of the vessel and it's just the tallykraft name in Chrome

On Tue, Jun 25, 2024, 12:21 PM Chris Hartsfield <trihar...@gmail.com> wrote:

--

[rgr...@comcast.net]

Good afternoon Chris,

Not sure I know of what your asking? I've never seen an emblem on the front of any Tolly's, we have the plastic emblems and propellers in the Tolly Swag store that we'll be bringing to the Mini's and next years Rendezvous

Rick

---

From: tollycraft-boa...@googlegroups.com <tollycraft-boa...@googlegroups.com> on behalf of Chris Hartsfield <trihar...@gmail.com>
Sent: Tuesday, June 25, 2024 12:21 PM
To: Tollycraft Boating Club Forum <tollycraft-boa...@googlegroups.com>
Subject: Emblem

 

I am trying to find a Tollycraft emblem for the front of my 26. I know they are probably impossible to come by.

I was wondering if anyone knows of a place that might be able to 3D print?

Chris

--

[Chris Hartsfield]

Brian,

The one I am talking about is the plastic one on the front/bow of the boat, above the front window.

That surface on that area is curved but the name is small enough that I don’t think that would be an issue.

They are riveted in place.

What I am looking for is the name not the small emblem, however if I could get them a both in chrome I would love to replace both the name and the emblem.

Guess I should have been more clear because the emblem would actually be the small Tollycraft Emblem not the name.

Thanks

Chris

Sent from my iPad

On Jun 27, 2024, at 10:14 AM, Brian Edmondson <bhedm...@gmail.com> wrote:



You received this message because you are subscribed to a topic in the Google Groups "Tollycraft Boating Club Forum" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/tollycraft-boating-club-forum/OWpQr7YXLyc/unsubscribe.
To unsubscribe from this group and all its topics, send an email to tollycraft-boating-c...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/tollycraft-boating-club-forum/CAMXLnUvo-ijCrW0TQ%3DiD7TtmYkuSgUyix9rieTT3t%3DyB91t2%2BA%40mail.gmail.com.

[Chris Hartsfield]

Sent from my iPad

On Jun 27, 2024, at 10:14 AM, Brian Edmondson <bhedm...@gmail.com> wrote:



Chris, when you say emblem I'm not sure if you're talking about a decal or the Tolycraft symbol?  Where does it mount? And is that location a flat surface? I have the tallykraft emblem that goes on the side of the vessel and it's just the tallykraft name in Chrome

You received this message because you are subscribed to a topic in the Google Groups "Tollycraft Boating Club Forum" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/tollycraft-boating-club-forum/OWpQr7YXLyc/unsubscribe.
To unsubscribe from this group and all its topics, send an email to tollycraft-boating-c...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/tollycraft-boating-club-forum/CAMXLnUvo-ijCrW0TQ%3DiD7TtmYkuSgUyix9rieTT3t%3DyB91t2%2BA%40mail.gmail.com.

[Brian Edmondson]

Hi Chris,

I wish I could help you, buy getting a sticker from Prism Graphics is all I can think of... I see why you're going to the trouble... your boat looks great.

The Tollycraft (name) emblem I have i  think would stand a good chance of cracking if I tried to mount it there and I was going too use it on the starboard side anyway, but I want to see what else is available out there  now; and frankly it's not a super high priority right now.  I'm  getting close to getting Symphony back in the water and have almost five years  into the restoration/upgrade.

I'll keep an eye out and send you a note if I see anything.

Brian Edmondson

Tolly 26 Sedan #837 "Symphony"

---

From: tollycraft-boa...@googlegroups.com <tollycraft-boa...@googlegroups.com> on behalf of Chris Hartsfield <trihar...@gmail.com>

Sent: Thursday, June 27, 2024 9:46 AM
To: tollycraft-boa...@googlegroups.com <tollycraft-boa...@googlegroups.com>
Subject: Re: Emblem

 

To view this discussion on the web visit https://groups.google.com/d/msgid/tollycraft-boating-club-forum/9B2C658B-6390-4DE0-966B-17592BEBA5FD%40gmail.com.

[Thistle Dew]

This one? I bought a replacement for this at the Roche Harbor Rendezvous. Need to get it on there still…

Greg

On Jun 27, 2024, at 9:59 AM, Brian Edmondson <bhedm...@hotmail.com> wrote:



Hi Chris,

I wish I could help you, buy getting a sticker from Prism Graphics is all I can think of... I see why you're going to the trouble... your boat looks great.

The Tollycraft (name) emblem I have i  think would stand a good chance of cracking if I tried to mount it there and I was going too use it on the starboard side anyway, but I want to see what else is available out there  now; and frankly it's not a super high priority right now.  I'm  getting close to getting Symphony back in the water and have almost five years  into the restoration/upgrade.

I'll keep an eye out and send you a note if I see anything.

Brian Edmondson

Tolly 26 Sedan #837 "Symphony"

---

From: tollycraft-boa...@googlegroups.com <tollycraft-boa...@googlegroups.com> on behalf of Chris Hartsfield <trihar...@gmail.com>
Sent: Thursday, June 27, 2024 9:46 AM
To: tollycraft-boa...@googlegroups.com <tollycraft-boa...@googlegroups.com>
Subject: Re: Emblem

 

<image0.jpeg>

Sent from my iPad

On Jun 27, 2024, at 10:14 AM, Brian Edmondson <bhedm...@gmail.com> wrote:



Chris, when you say emblem I'm not sure if you're talking about a decal or the Tolycraft symbol?  Where does it mount? And is that location a flat surface? I have the tallykraft emblem that goes on the side of the vessel and it's just the tallykraft name in Chrome

On Tue, Jun 25, 2024, 12:21 PM Chris Hartsfield <trihar...@gmail.com> wrote:

I am trying to find a Tollycraft emblem for the front of my 26. I know they are probably impossible to come by.

I was wondering if anyone knows of a place that might be able to 3D print?

Chris

--
You received this message because you are subscribed to the Google Groups "Tollycraft Boating Club Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tollycraft-boating-c...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/tollycraft-boating-club-forum/ee7b29e8-3ca1-4e23-a218-9bda7710f9c7n%40googlegroups.com.

--
You received this message because you are subscribed to a topic in the Google Groups "Tollycraft Boating Club Forum" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/tollycraft-boating-club-forum/OWpQr7YXLyc/unsubscribe.
To unsubscribe from this group and all its topics, send an email to tollycraft-boating-c...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/tollycraft-boating-club-forum/CAMXLnUvo-ijCrW0TQ%3DiD7TtmYkuSgUyix9rieTT3t%3DyB91t2%2BA%40mail.gmail.com.

--
You received this message because you are subscribed to the Google Groups "Tollycraft Boating Club Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tollycraft-boating-c...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/tollycraft-boating-club-forum/9B2C658B-6390-4DE0-966B-17592BEBA5FD%40gmail.com.

--
You received this message because you are subscribed to the Google Groups "Tollycraft Boating Club Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tollycraft-boating-c...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/tollycraft-boating-club-forum/SN7P223MB0580D53519017867EDDBEA9BBED72%40SN7P223MB0580.NAMP223.PROD.OUTLOOK.COM.

[PSP]

Any tips and tricks for removing the old and installing the new would be welcome. Do I need a rivet gun? Can I just use screws (with sealant)? How to remove old rivets?

Thank you!

On Jun 27, 2024, at 10:04 AM, Thistle Dew <thistle...@gmail.com> wrote:

This one? I bought a replacement for this at the Roche Harbor Rendezvous. Need to get it on there still…

To view this discussion on the web visit https://groups.google.com/d/msgid/tollycraft-boating-club-forum/571FF9A3-069A-42F5-80C8-2B3D3D6EB63F%40gmail.com.

[Douglas Wise]



Sent from my iPhone

On Jun 27, 2024, at 9:14 AM, Brian Edmondson <bhedm...@gmail.com> wrote:



Chris, when you say emblem I'm not sure if you're talking about a decal or the Tolycraft symbol?  Where does it mount? And is that location a flat surface? I have the tallykraft emblem that goes on the side of the vessel and it's just the tallykraft name in Chrome

On Tue, Jun 25, 2024, 12:21 PM Chris Hartsfield <trihar...@gmail.com> wrote:

I am trying to find a Tollycraft emblem for the front of my 26. I know they are probably impossible to come by.

I was wondering if anyone knows of a place that might be able to 3D print?

Chris

--
You received this message because you are subscribed to the Google Groups "Tollycraft Boating Club Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tollycraft-boating-c...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/tollycraft-boating-club-forum/ee7b29e8-3ca1-4e23-a218-9bda7710f9c7n%40googlegroups.com.

--
You received this message because you are subscribed to the Google Groups "Tollycraft Boating Club Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tollycraft-boating-c...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/tollycraft-boating-club-forum/CAMXLnUvo-ijCrW0TQ%3DiD7TtmYkuSgUyix9rieTT3t%3DyB91t2%2BA%40mail.gmail.com.

[Brian Edmondson]

Yeah Chris, and I think the guy who owned all the Old Tully craft inventory passed away. But I'm not sure of that. I bought a rudder off of him for a tally 28 to put on my 26. Some stuff like that might still be around someplace. There were people that were interested in buying out that some of that stuff. Don't know who. But one of the big club meetings might have somebody that knows a lot more than me. Dan leanhouts knows a lot

To view this discussion on the web visit https://groups.google.com/d/msgid/tollycraft-boating-club-forum/B1B3CBA6-E482-49B0-A3CA-805F469032BA%40comcast.net.

[John Baudendistel]

Old rivets are removed by drilling the rounded part of the head off.  The emblem will slid off the remaining aluminum rivet.  Then pop the rivet through the boat with a punch.  Generally speaking.  

My emblems on my 44 are screwed in with SS screws. 

John

To view this discussion on the web visit https://groups.google.com/d/msgid/tollycraft-boating-club-forum/B7E73FF9-AAFB-4147-AEFA-B247AA675FDE%40gmail.com.

--

Thanks, 

John Baudendistel

jo...@ets247.com

[Chris Hartsfield]

Thanks 

Sent from my iPhone

On Jun 27, 2024, at 11:51 AM, Brian Edmondson <bhedm...@gmail.com> wrote:



To view this discussion on the web visit https://groups.google.com/d/msgid/tollycraft-boating-club-forum/CAMXLnUv34KGqGLehfPhFdWmkOL9KL6t9phuCTTHfCT8t7m3o2g%40mail.gmail.com.

<image.png>