Fs-1320d Driver Download

[Ben Hollinbeck]

RecommendationWindows users who are inexperienced in updating Kyocera Laser Printer device drivers can use the DriverDoc driver update tool [Download DriverDoc - Product by Solvusoft] to help update these Kyocera ECOSYS FS-1320D drivers. This driver update utility makes sure that you are getting the correct drivers for your FS-1320D and operating system version, preventing you from installing the wrong drivers.

It is possible to link ECOSYS FS-1320D errors to corrupt or obsolete system drivers. When the operating system that your device depends on gets an update, drivers can suddenly stop working with it. Don't worry, because these PC problems will probably be fixed after updating your Laser Printer drivers.

The right ECOSYS FS-1320D driver can be difficult to locate on the manufacturer's website. Locating, downloading, and manually updating your Windows ECOSYS FS-1320D driver does take a lot of time, making the process unbearable for most users. Inaccurate driver versions may have an adverse impact on your computer's performance, often creating more problems.

To keep up with all of the essential new updates, we suggest going with a driver updater program. Driver maintenance services make sure that your drivers are up-to-date and that you have a backup of your current drivers before downloading new drivers. With driver backup, you can rollback any driver's software to an earlier version if there is a malfunction.

so you try to cancel the print job, and it sits there and sits there, usually we wait 5 minutes if it has not cleared by then, reboot the printer, and the job is gone, and everything else that was backing up behind it starts to print.

Hi Captain, is the driver shared from the server to the client, if so i would try and setup a direct print queue on a workstation or laptop and see if you get the same result. if you do then try swapping the driver if you are using PS then try a PCL or even a generic driver and just see if that helps improve, if it dose you can then give that information back to KM and it show that it might be they way that the printer receives the data thats the issues and not the network.

I am not sure how connecting it to a USB connection would prove or disprove a network issue. If it is set up correctly on a print server using the correct driver (never use the Kyocera universal print driver) it should work fine. I agree with setting it up on a LAN mock up outside of your production network. If there are still issues it is the printer.

Not if the ethernet card in the printer itself is causing the error. It may well be that it was just set up incorrectly on the network in the first place. I agree afeitguy that they will probably argue until the cows come home.

Two Kyocera printers, the FS 1320D and the FS C1020 MFP refuse to print with cups 1.5.2 delivered in precise.They are supported by the manufacturer and work as expected in oneiric and cups 1.5.0.However in Precise as of now, the printer's status...

How many people print with this printer ? how many of them are windows - 8? Do you have a mix of Operating systems windows-8, Linux, Mac etc ? Are you using it behind any print server or its on its own as a network printer for people directly.

Yes, I have seen all print que stuck due to one client driver or print setting problem in kyocera. It might be just one client from which print gets stuck and others are stuck behind. So adhering to the above suggestions might help.

I am also facing a similar issue .we have a mix fleet of around 150 printers with approx 80 Kyocera different models ,when the printing goes down,it happens only for Kyocera printers. No print speed issues are encountered in any Canon ,Ricoh or Lexmark.

This driver is available in the Gutenprint Printer Application Gutenprint supports a wide variety of Epson Stylus, HP DeskJet, Canon BubbleJet, Lexmark inkjet printers, PCL laser printers, and Canon, Fujifilm, Sony, Olympus dye sublimation printers. Its primary goal is uncompromising quality. Epson Stylus printers in particular are supported in all resolutions and modes, and the latest printers are capable of producing prints that rival photographic prints in quality. This package also offers much faster printing for high quality text and presentation graphics when required. Gutenprint is the successor of Gimp-Print, it was renamed with the change from version 4.x to 5.x. All printers which worked with Gimp-Print before, work also (and hopefully better) with Gutenprint. The actual printer drivers are in the Gutenprint library. To give access to them Gutenprint has various interfaces: Plug-in for the GIMP: This plug-in provides a printing dialog for the GIMP to print images directly, and graphical controls to adjust the rich set of options of the Gutenprint drivers. The possibility to integrate a PPD file and to print PostScript allows to use the plug-in also with Ghostscript drivers other than Gutenprint or on PostScript printers. Native CUPS driver: This interface makes it possible to set up print queues under CUPS so that one can print from any application or from the command line. As it integrates directlty into the CUPS filtering system it is easy to set up in any CUPS 1.1.x or CUPS 1.2.x version without need of any additional software. With Foomatic it is even possible to use this native CUPS driver with other spoolers than CUPS. Ghostscript IJS plug-in: This is a way to use Gutenprint as a Ghostscript driver without necessity of patching and recompiling Ghostscript. It uses the IJS plug-in interface as also HPIJS from HP or the drivers for the Epson EPL-....L series do. IJS drivers can be used with any IJS-enabled Ghostscript as ESP Ghostscript 7.x or newer, GNU Ghostscript 6.53 or newer, APFL Ghostscript 7.04 or newer. With the Foomatic data coming with Gutenprint and the current Foomatic packages PPD files for use with all printing systems (CUPS, LPRng, LPD, GNUlpr, PPR, PDQ, CPS, spooler-less printing) can be generated. Print queues set up with these PPD files and foomatic-rip give full access to all options of the Gutenprint driver. The Gutenprint package already ships with all needed PPD files for CUPS and data files for Foomatic. Therefore we do not provide PPD files for download here. If you got Gutenprint with your operating system distribution, use the printer setup program coming with your distribution. Otherwise it is recommended to use the CUPS driver if you use CUPS as your printing system or the IJS driver if you use another spooler. IMPORTANT: Always use the Foomatic data and/or PPD files of the Gutenprint version which you are actually using! Remove and re-create your print queues after every update of Gutenprint. If you are using the Gutenprint package of your Linux distribution, it is possible that the Foomatic data and/or the PPD files can be in separate packages. Make sure you install them and that they are of the version corresponding to your Gutenprint package. The information currently here corresponds to driver version 5.2.7. If you use another version, have a look in the documentation coming with your Gutenprint package. If you have still a 4.x version of Gimp-Print, it is highly recommended to upgrade at least to Gutenprint 5.0.x. The driver package which is available for download here on this site only contains the CUPS driver and the utilities (escputil, cups-calibrate), it does not contain the IJS driver and the GIMP plug-in.

The following sections provide an explanation for each of the headings in the printer tables provided in the above documents. Click on the arrow in front of any section to read the explanation. The headings are Printers, Printer Data Stream, Host-Based or Windows Only, PDT File for PC5250, MFRTYPMDL for HPT, LPR, PJL, SNMP, and IPP.

Printers

The Printers column contains the name of each printer, or printer series. The printers are grouped by type of printer (for example, laser printers, color laser printers, ink jet printers, dot matrix and line printers, and multi-function printers) and are generally listed in ascending order. An attempt is made to have an entry for each ASCII printer from a particular manufacturer, whether they are currently marketed by that manufacturer or not.

Printer Data Stream

The Printer Data Stream column lists the printer data streams supported by each particular printer. If the printer lists more than one data stream, you can look across the table for each data stream to see how it is supported by PC5250 Printer Definition Table (PDT) Files, Host Print Transform (HPT), Remote Output Queues, *LAN 3812 PJL device descriptions, *LAN 3812 SNMP device descriptions, and *LAN 3812 IPP device descriptions. Support for these can differ depending on the data stream.

Some popular printer data streams include:AFP/IPDSThe term AFP/IPDS refers to the Advanced Function Printing and Intelligent Printer Data Stream printer languages from IBM. Printers that use these printer data streams can be configured using a *LCL or *RMT IPDS device description if they are twinax attached, or using a *LAN IPDS device description if they are LAN attached using the appropriate built-in print server from IBM or InfoPrint Solutions Company. Printers that use these printer data streams cannot be configured using a Remote Output Queue, *LAN 3812 PJL, SNMP, or IPP device description, or a PC5250 printer session unless the printer also supports a non-IPDS printer language such as HP PCL5e, HP PCL6, IBM PPR, or Epson ESC/P2.Code VThe term CODE V refers to a printer language from IBM that supports printing graphics and bar codes on certain printers. Printers that use this printer data stream will work with Host Print Transform (HPT) and might work with a PC5250 Printer Definition Table (PDT) file.EPL

EPL1

EPL2The terms EPL, EPL1 and EPL2 refer to the Eltron printer languages. EPL1 is an escape sequence based language that is used to talk to the older LP2022/LP2042 printers. EPL2 is a text based language that uses all keyboard accessible characters to communicate with all other Eltron label printers. These printer languages are not supported by Host Print Transform (HPT), but HPT should pass the EPL1 data streams to the printer untouched when configured to use the QWPDEFAULT system-supplied Workstation Customizing Object (WSCST). It is unknown at this time whether HPT will pass the EPL2 data stream to the printer untouched when configured to use the QWPDEFAULT system-supplied Workstation Customizing Object (WSCST).EPL emulationThe term EPL emulation refers to an emulated version of the Eltron printer language from Eltron and Zebra Technologies. This printer language is not supported by Host Print Transform (HPT), but HPT should pass the EPL data stream to the printer untouched when configured to use the QWPDEFAULT system-supplied Workstation Customizing Object (WSCST).Epson ESC/P2The term Epson ESC/P2 refers to the ESC/P2 printer data stream. ESC/P2 was developed by Epson, but is used by a number of other printer manufacturers. It is used primarily in dot matrix line printers, but it is also used in a number of ink jet printers.Epson ESC/POS

Epson ESC/POS emulationThe terms Epson ESC/POS and Epson ESC/POS emulation refer to a version of the ESC/P2 printer data stream specifically for Point-of-Sale (POS) or transaction printers. ESC/POS was developed by Epson, and it is used primarily, if not exclusively, in point-of-sale printers. This printer language is not supported by Host Print Transform (HPT), but HPT should pass the ESC/POS data stream to the printer untouched when configured to use the QWPDEFAULT system-supplied Workstation Customizing Object (WSCST).IBM PPDSThe term IBM PPDS refers to the IBM Personal Printer Data Stream. PPDS was development by IBM and was used in older IBM and Lexmark laser printers.IBM PPR

IBM PPR XL

IBM PPR XL II

IBM PPR XL III

IBM PPR X24

IBM PPR XL24The term IBM PPR refers to the IBM Proprinter data stream. IBM PPR was developed by IBM, but it is used by a number of other printer manufacturers. It is used primarily in dot matrix line printers, but it is also used in a number of ink jet printers. The XL designates wide-carriage printers, the II and III designate upgrades to the Proprinter data stream, and the 24 refers to the Proprinter data stream used for 24-pin printers.GDI

Host-based

Host-based (GDI)

Host-Based Printing Proprietary (GDI)

Windows GDIThe terms GDI, Host-based, Host-based (GDI), Host-Based Printing, Proprietary (GDI), and Windows GDI are generic terms that can refer to any Host-based or Windows-only printer, which use a proprietary printer data stream rather than an industry-standard printer data stream such as IBM Proprinter Data Stream (PPDS), Epson ESC/P2, HP Printer Control Language (PCL), or Adobe PostScript (PS). These printers support printing from Windows, and possibly from Macintosh or Linux, but will not print directly from IBM i, IBM i5/OS, IBM OS/400, UNIX or any other non-PC-based Operating System, even if the printers can be network-attached. Because these printers require a proprietary printer data stream, they will not work with Host Print Transform (HPT) or a PC5250 Printer Definition Table (PDT) File.

Note: Configuring a PC5250 printer session without Host Print Transform (HPT) and without a Printer Definition Table (PDT) file is most likely to print successfully. However, you will not be able to print *AFPDS spooled files because that requires using Host Print Transform, and you will have limited control over the formatting of your output (including limited control over the font selection). Therefore, configuring to print to a Host-Based Printing, Proprietary (GDI), or Windows GDI printer is considered unsupported, as would printing to any other host-based printer.HP PCL3

HP PCL4

HP PCL5

HP PCL5c

HP PCL5e

HP PCL6

HP PCL6cThe terms HP PCL3, HP PCL4, HP PCL5, HP PCL5c, HP PCL5e, HP PCL6, and HP PCL6c refer to different versions of the HP Printer Control Language. PCL was developed by Hewlett-Packard (HP), but it is used by a number of other printer manufacturers including IBM Printing Systems and Lexmark. PCL3 is used in a number of HP DeskJet printers, PCL5c and PCL6c are often used in color laser printers, and PCL5e and PCL6 the often used in B&W or monochrome laser printers.PCL5c emulation

PCL5e emulation

PCL6 emulationThe terms PCL5c emulation , PCL5e emulation and PCL6 emulation refer to an emulated version of the Printer Control Language, but they might also be used when a printer uses true HP PCL support. PCL was developed by Hewlett-Packard (HP), but it is used by a number of other printer manufacturers including IBM Printing Systems and Lexmark.Adobe PostScript 2

Adobe PostScript 3The terms Adobe PostScript 2 and Adobe PostScript 3 refer to versions or levels of the Adobe PostScript printer language. PostScript was developed by Adobe, but is used by a number of other printer manufacturers, though typically in laser printers. The PostScript printer data stream will not work with Host Print Transform (HPT) or a PC5250 Printer Definition Table (PDT) File.PostScript 2

PostScript 2 emulation

PostScript 3

PostScript 3 emulationThe terms PostScript 2, PostScript 2 emulation, PostScript 3, and PostScript 3 emulation typically refer to an emulated version of the PostScript printer language, but they might also be used when a printer uses true Adobe PostScript support. The PostScript printer data stream will not work with Host Print Transform (HPT) or a PC5250 Printer Definition Table (PDT) File.PDF

PDF v1.2

PDF v1.3

PDF v1.4

PDF v1.5

PDF v1.6

PDF v1.7

PDF v1.x emulationThe terms PDF, PDF v1.2, PDF v1.3, PDF v1.4, PDF v1.5, PDF v1.6 and PDF v1.7, or PDF v1.x emulation, refer to the ability to directly print Adobe Portable Document Format (PDF) documents without using a Windows printer driver or converting the PDF document to an HP PCL printer data using Host Print Transform (HPT). PDF v1.2, v1.3, v1.4, and v1.5 refer to the PDF version supported by the printer firmware. If a printer supports direct PDF printing, then it generally supports the printing of *USERASCII spooled files containing PDF data through a *LAN 3812 printer device description, a Remote Output Queue, a PC5250 printer session, or using Binary FTP to send a PDF file stored in the Integrated File System directly to the printer TCP/IP address or host name. However, this is dependent on the version of PDF used to generate the *USERASCII spooled file or PDF file, as well as the PDF version supported by the printer firmware.PGL

IGP (PGL)The terms PGL and IGP (PGL) refer to the Printronix Graphic Language. PGL is not supported by Host Print Transform (HPT), but HPT should pass IGP/PGL-compatible data streams to the printer untouched when configured to use the QWPDEFAULT system-supplied Workstation Customizing Object (WSCST).RPCS

Ricoh RPCSThe terms RPCS and Ricoh RPCS refer to the Refined Printing Command Stream (RPCS) printer language from Ricoh. This printer language is a MicrosoftWindows-optimized printer data language. Therefore, printers that use this printer data stream will not work with Host Print Transform (HPT) or a PC5250 Printer Definition Table (PDT) file.XMLThe term XML refers to XML-Enabled Printing. XML is text-based, but it is unknown at this time whether Host Print Transform (HPT) will pass the XML data stream to the printer untouched when configured to use the QWPDEFAULT system-supplied Workstation Customizing Object (WSCST).XHTML

XHTML-PrintThe terms XHTML and XHTML-Print refer to a member of the family of XHTML languages defined by the Modularization of XHTML [XHTMLMOD]. According to the W3C, XHTML is designed to be appropriate for printing from mobile devices to low-cost printers that might not have a full-page buffer and that generally print from top-to-bottom and left-to-right with the paper in a portrait orientation. XHTML-Print is also targeted at printing in environments where it is not feasible or desirable to install a printer-specific driver and where some variability in the formatting of the output is acceptable. XHTML will not work with Host Print Transform (HPT) or a PC5250 Printer Definition Table (PDT) File.XPSThe term XPS refers to the XML Paper Specification, which is a specification for a page description language and a fixed-document format developed by Microsoft. It is an XML-based or XAML-based specification, based on a new print path and a color-managed vector-based document format which supports device independence and resolution independence. XML Paper Specification, or XPS, will not work with Host Print Transform (HPT) or a PC5250 Printer Definition Table (PDT) file.ZPL

ZPL IIThe terms ZPL and ZPL II refer to different versions of the Zebra Programming Language from Zebra Technologies. These printer languages are not supported by Host Print Transform (HPT), but HPT should pass the ZPL and ZPL II data streams to the printer untouched when configured to use the QWPDEFAULT system-supplied Workstation Customizing Object (WSCST).ZPL emulation

ZGL

ZGL (Zebra ZPL emulation)The terms ZPL emulation, ZGL and ZGL (Zebra ZPL emulation) refer to emulated versions of the Zebra Programming Language from Zebra Technologies. This printer language is not supported by Host Print Transform (HPT), but HPT should pass the ZPL data stream to the printer untouched when configured to use the QWPDEFAULT system-supplied Workstation Customizing Object (WSCST).

Note: If the printer tables refer to any printer data streams other than the ones listed above, then an explanation of those data streams will be included at the bottom of the printer tables.

Host-Based or Windows Only

The Host-Based column (formerly called the Windows Only column) shows if a specific printer is a host-based printer. The term Windows Only printer means that the printer was designed to be used only on a PC running a version of Microsoft Windows and was also generally designed to be used in a home or small office environment rather than in a networking environment. The term host-based printer expands this to refer to any printer that relies on the processing power of the host computer to generate printable pages; for example, if the host computer is running one of the versions of Microsoft Windows, Linux, or Macintosh operating system. The term Windows Only printer is becoming somewhat obsolete because newer printers that fit this category often come with printer software and printer drivers that allow them to be used on Apple Macintosh computers and PCs running one or more versions of the Linux operating system. However, the term Windows Only printer will often continue to be used to describe host-based printers.

Because they rely on the processing power of the host computer, host-based printers do not need a powerful processor of their own and, therefore, they tend to be less expensive than conventional printers. However, because they share the computer's processor, they might be slow and might slow down other tasks running on the computer. Host-based printers typically use a proprietary printer data stream rather than an industry-standard printer data stream such as IBM Proprinter Data Stream (PPDS), Epson ESC/P2, HP Printer Control Language (PCL), or Adobe PostScript (PS).

Because they use a proprietary printer data stream, they do not work with Host Print Transform (HPT) or a PC5250 Printer Definition Table (PDT) file. Because they will not work with HPT, they also will not work to print *AFPDS spooled files through the AFPDS-to-ASCII Transform code within HPT. The only way to get a host-based printer to print IBM i family spooled files is to attached it to a host computer and then use printer emulation software, such as a PC5250 printer session, to print the spooled file through the host-based printer driver.

PDT File for PC5250

The PDT File for PC5250 column lists the name of a Printer Definition Table (PDT) File that can be used when configuring a Personal Communications 5250 (or PC5250) printer session.

Personal Communications 5250 (PC5250) started shipping new PDT files starting in V5R3M0 IBM iSeries Access for Windows. PDT files listed in lowercase characters are shipped with V5R3M0 iSeries Access for Windows and above (for example, hppcl5.pdt), while PDT files listed in UPPERCASE characters are shipped with V5R2M0 iSeries Access for Windows and below (for example, HPLJ4.PDT). For more information on PDT files, including a list of all PDT files available through iSeries Access for Windows, or to get the older PDT files on a PC running V5R3M0 iSeries Access for Windows or higher, please refer to the following document:

N1019626: List of Printer Definition Table (PDT) Files for Use with PC5250

For information on configuration and limitations of PC5250 printer sessions, with or without a PDT file, please refer to the following document:

N1018716: System i Access for Windows: Configuring a PC5250 Printer Session

MFRTYPMDL for HPT

The MFRTYPMDL for HPT column lists the Manufacturer Type and Model (MFRTYPMDL) setting that can be used with Host Print Transform (HPT) to select the appropriate data stream for that printer. This can apply to use with a PC5250 printer session as well as a Remote Output Queue, a *LAN 3812 PJL device description, a *LAN 3812 SNMP device description, or a *LAN 3812 IPP device description.

Note: A setting of QWPDEFAULT refers to setting the manufacturer type and model (MFRTYPMDL) parameter to *WSCST, *WSCSTLETTER, or *WSCSTCONT132, and then setting the workstation customizing object (WSCST) parameter to QWPDEFAULT in library QSYS. This special workstation customizing object causes Host Print Transform to send plain ASCII text without any printer controls, such as page size, LPI, CPI, font, print quality, and so on.

For more information on using Host Print Transform (HPT) with various ASCII printers, please refer to the following documents:

N1019698: Printer Model Settings for Host Print Transform (HPT)

N1019470: Using Host Print Transform (HPT) with a PC5250 Printer Session at V5R1M0 and Above

LPR

The LPR column shows whether a Remote Output Queue or the Send TCP/IP Spooled File (SNDTCPSPLF or LPR) command can be used to print to this printer when directly connected to the LAN. Support for printing using the TCP/IP Line Printer Requester (LPR) and Line Printer Daemon (LPD) protocols is available in the base code for R230 OS/400 and above for the SNDTCPSPLF and LPR commands, and in the base code for R310 OS/400 and above for Remote Output Queues.

Support for Remote Output Queues, as well as the SNDTCPSPLF and LPR commands, is largely dependent on the internal network interface card (NIC) or external print server used with the printer. Therefore, this column is as much of a statement about the NIC or print server typically shipped with the printer than it is about the printer itself. If it is unclear whether the NIC, print server and/or printer supports LPR/LPD, contact the manufacturer.

This field can have one of the following settings:YLPR/LPD can be used to print to this printer when directly connected to the LAN, provided the print server supports LPR/LPD.NLPR/LPD cannot be used to print to this printer when directly connected to the LAN. ?Not enough is known about this printer, the network interface card (NIC), or the external print server typically shipped with the printer to know whether LPR/LPD will work or not.For more information on Remote Output Queues, please refer to the following documents:

N1010090: Configuring a Remote Output Queue (RMTOUTQ)

N1019443: Configuring a Remote Output Queue (RMTOUTQ) to a Label or Receipt Printer

N1018931: Configuring a Remote Output Queue (RMTOUTQ) to a Windows Print Queue

N1010172: Recommended Remote Printer Queue Values for Remote Output Queues (RMTOUTQs)

N1019579: Configuration Settings and Error Messages for Remote Output Queues (RMTOUTQs)

N1019659: Capabilities and Limitations of Remote Output Queues (RMTOUTQs)

N1019713: Using Host Print Transform (HPT) with a Remote Output Queue (RMTOUTQ)

The TSPRWPR exit program allows a user to print a specific page range when using a Remote Output Queue that is configured with a connection type of *IP or when using the Send TCP/IP Spooled File (SNDTCPSPLF or LPR) command