D6633 Firmware

[Zada Odome]

Onthis page, you can find the link to download the Sony Xperia Z3 Dual D6633 Stock ROM Firmware (Flash File). The Xperia Stock ROM comes in a compressed package, which also includes the Flash Tool, USB Driver, and a How-to Install manual.

The following Stock ROM can be used to downgrade, upgrade, or reinstall the stock firmware on your Sony Xperia smartphone and tablet. It can also fix software-related, bootloop, or IMEI issues on your Xperia device.

I'm trying to install .575 firmware on my Xperia Z3 dual D6633 device with flashtool but as i connected to the pc (with vol down pressed) flashtool says ERROR - Device connected in flash mode but driver is too old. How I can fix this?I'm on latest Marshmallow update and unlocked bootloader.

"flashtool" folder. Open it. Then folder "drivers", open the folder. You will see an application "flashtool drivers". Run this application as admin. Select the flash tool drivers and the fastboot drivers.

I got a xperia z2 prototye. model 6503.

Everything is working fine, except the call quality. i can hear and understand very well, but the other person has echoes, and very bad sound..

When I use a heatset, there is no problem. and it is almost good, when I put the phone on the table, with speaker on. The problem is worst, when I hold the phone on my ear..

Is it a hard- or software related problem?

The firmware in your phone is an older version and we've made improvements for call audio and echo in the updates we released. I suggest that you contact the person who gave you this prototype to have it updated to the latest version, 23.0.1.A.0.167.

I had 1 Z2 with a working Mic, not great but working, and another one (Girlfriend) with the bad mic, echo and bad signal quality for all receivers. We returned her phone and we went through 2 extra Z2s, they all had the problem to some degree. One of the new Z2 didn't have the echo issue but low and bad reception compared to any other phone we have. I ended up byiing a Z3 and the problems are gone.

I love the phones but I feel cheated by Sony, I have a phone that we've never been able to use and replacements didn't fix the problem and with no upgrade patch to Z3 the phone is now just sitting here and no one wants to use it.

I have the same problem (sometimes the quality is OK, most of the time ppl tell thay can bareely understand me and I sound as if was under water) and the funny thing is I am using a handset provided by Sony as a replacement for my previous phone which was leaking water. I tried with the noise suppresion off (no luck) then I sent it to Sony and got it back with a note that it was fine. I called Sony customer service from the phone and they admitted the quality was awful and booked me a "VIP" repair service. Shortly after I received the phone back with a note saying it was fine. Happy days. I just got a Moto G 2nd gen as a temporary/back up phone and I will not buy Sony products anymore (so disappointed as overall I loved the Z2).

The update, which Sony commenced on 21 July, is now seeding for Z3 Dual users in regions such as Brazil, Hong Kong, the Middle East, Portugal, Russia, Saudi Arabia and the US. Some of those who have installed the 23.4.A.0.546 stock firmware build have reported that the USSD codes are not working.

According to a review shared by recognised XDA developer, Jozinek, the update brings a new launcher and allows users to switch the icon size from smaller version to big ones. The home-screen rotation feature, which was earlier limited to a few Sony handsets, is now available for the Z3 Dual model.

So the last September I got myself this used Z3 dual ( d6633 ) from a guy I know, The phone was in a descent condition, only changed the back cover and main flex cable as his previous owner stated at the time (which turned out to be a lie) , but after 3 days of using I noticed that the screen is a little bit out of the frame and I decided to open it up and put the double face adhesive in a different way under the screen in order to make it well glued to the phone. Of course when I opened it up I found that the last person who fixed this phone had actually put adhesive under the middle of the screen not only on the frame which upon trying to get the screen out it completely was torn apart and I had to get a new one.

So I bought a new screen, new main flex cable and an antenna plate cover . I noticed that there was no antenna plate cover in the phone and it was working fine but I thought I should buy it anyways.'''bold text'''

3. As I mentioned the phone was working without either the thin plate under the small board or the antenna cover over it ( That's why I think that the thin wire coming out of the main board actually had a role to replace them)

Please if you had a similar situation tell me what could possibly be the reason why the screen is not turning on! and Is that wire really was intended to do something or not? If I buy another screen will that work or is it something else that is making the screen not go on?

What I'm getting out of this, is that your phone works, but your new display assembly doesn't. Likely you purchased poor quality parts, and that's why you're having this issue. It could be the connector on the logic board, but that's a whole different problem to rule out. What I didn't see in your post, is if the original display assembly you had, was working or not. This would help to rule out if your new display assembly is in working order. Or hopefully should

If it's a connector on the logic board, you could try and replace it yourself. It is do able. However micro soldering isn't for the feint of heart. Fortunately Jessa Jones at iPad Rehab is very good. She has a mail in service, and pretty much knows everything

Meanwhile I opened up my main board and actually found that there is a soldered on it... I don't exactly know what is this but I'm assuming that it's something like you said... What do you think about that? Where is this wire should be connected/soldered on its other end?

با سلام

من گوشیم z3 6603هست.با رام رسمی ورژن6.0.1

مشکلی ک دارم اینه ک gpsگوشیم درست عمل نمیکنه.و توی برنامه های مختلفsatelliteرو اسکن نمیتونه بکنه.و برای نقشه یابی و سایر برنامه هایی ک نیاز به gpsداره درست عمل نمیکنه.یگ بارم گوشی رو فلش کردم و دوباره رام6.0.1رو نصب کردم.ممنون میشم راهنماییم کنید.

با سلام گوشی بنده با اندروید 6 و آخرین بیلد یکم هنگ میکنه و OTG هم نداره میخوام برگردونمش به اندروید 4.4 با فلش تولز آیا میشه

با سلام خدمت شما گوشی من به یکباره خاموش شد و روشنش میکنم روی صفحه آبی گیر میکنه بالا نمیاد و قبلا هم همینطور میشد میدادم بیرون فلش میزدن حالا میخوام خودم فلش بزنم دسترسی ندارم به بازار و بدون باکس میتونم فلش بزنم با فلش تولز فقط

سلام خسته نباشید

من آخرین رام بیلد ۲۹۱ رو نصب کردم اندروید قبلیم ۴.۴ بود و قابلیت otg هم داشت الان که بروزرسانیش کردم قابلیت otg برداشته شده و اصلا گزینه ای به نام detect هم نداره و موقع وصل کردنش هم هیچ عکس و العملی نشون نمیده رو گوشی دیگه تست کردم otg هم سالمه ممکنه چون رام خاورمیانس این قابلیت رو برداشته باشن و چه رامی مدنظرتونه

من گوشیم Sony XPERIA Z3 doul D6633 هست .یه مدت هست که خود به خود رام گوشی میپره و گوشی بالا نمیاد (رام 5.1.1 ) هم گذاشتم رو گوشی اما باز میپره ممنون میشم نظرتونو بگید که چرا اینجور میشه و را حلش چی هست

بله سری اول که گوشی خاموش شد و هیچ جوره بالا نیومد یکی از دوستان تعمیر کار که گوشی بهشون داده بودم گفتن باکس زدم به گوشی

توصیه یا راحل شما برای تست نرم افزار های روی گوشی چی هست .چطور میتونم برنامه ها رو انالیز کنم که کدومشون باعث هنگ کردن یا پریدن رام میشه بکنم ایا برنامه ای هست که بشه فهمید اشکال از کجا هست

سلام

گوشی من D6683 هستش جا یو اس بیش خراب شده میخواهیم بپرسم ابدیتشاز رو گوشی میاد یا نه لطفا جواب بدین ممنون

من ارتقا دادم z3 d6633 به 6 یکی از معایب سیگنال وای فای نسبت به قبل کم شده و پین wps که قبلا تو وای فای بود برداشته شده

با سلام و خسته نباشید. سایتتون محشره. اندرود 6 رو فلش کردم و راضیم ازش. فقط یک مشکلی دارم وقتی که فلش مموری وصل میکنم به گوشیم دگ با فایل منیجرها باز نمیکنه و نمیتونم به فلش فایل انتقال بدم. اگه راه حل این مشکل رو میدونید خواهشا بگین چون من از این قابلیت زیاد استفاده میکنم.ممنون

سلام و عرض خسته نباشید خدمت شما.

میخواستم بدونم میشه اندروید ۵.۱.۱ رو که برای Z3 dual d6633 هستش رو روی Z3 dual d6683 نصب کنم

3a8082e126