Dynload on tm1500 board

[hkr2000]

Hi, current now the kernel does not work on tm1500 board in nohost
mode. Is there any way to solve it?

[hkr2000]

If not, is there any other way to load binary applications?

[Guo Hongruan]

Because of lacking trimedia hardware board and enough knowledge of
hardware, I have never validate it on any board in nohost mode.

The following is from tmlinux project
page(http://code.google.com/p/tmlinux).

Although tmlinux can run on trimedia simulator, it CAN NOT run on any
hardware boards. So this project team needs help from semiconductor
company (E.g: NXP) or trimedia development board providers (E.g: MDS).
Tmlinux project team needs a proper trimedia development board and
professional support on hardware.

On Wed, 08 Oct 2008 09:21:26 +0800, hkr2000 <hkr...@gmail.com> wrote:

> Hi, current now the kernel does not work on tm1500 board in nohost
> mode. Is there any way to solve it?
> >

--
Guo Hongruan, Embedded Linux Consultant
Mobile: +86-0-13484056007
Skype: camelguo
http://www.gulessoft.com

[Guo Hongruan]

You can popluate root filesystem(ramfs) in ram and put your application
(named init) into it, and then load it. Please refer
applicationDeveloperGettingStart
(http://code.google.com/p/tmlinux/wiki/ApplicationDeveloperGettingStart).
I will modify the PlatformDeveloperGettingStart to record how to load
application in ramfs.

[hkr2000]

But it also use dynload to load app, so if there is no dynload, how to
load
application in ramfs?

[Guo Hongruan]

dynload?? What's your meaning? Dynload is just a mechainsm which is built
into kernel image. Using it, the kernel image can load applications.