[Flexi 8.5 Software
Laurice Whack
The Hydro-Logic Flexi Logger 105 is a flexible data logger that can be paired with a large range of sensors to monitor and measure a variety of metrics, including water flow, level, quality and weather. This data can be used to provide local flood warning, reservoir level and environmental monitoring.
The Hydro-Logic Flexi Logger 105 is very similar in size to FL100 model so will fit easily into our standard pole top enclosure. The pre-drilled holes in the fixing bracket are also located in the same place as for the FL100 model.
The design of the Hydro-Logic Flexi Logger 105 ensures that the battery or the SIM card can be safely changed with no risk to delicate components. To access the battery chamber, please follow the instructions in the product manual or watch our video guide.
I am a first time 3-D printer. I tried printing this flexi cat but the bridges were fused to the top part of the cat, making the flexi not bendable at all. Anybody can help? Thank you. As I looked at the picture, I also realized the print was not so clean ...
You place the part(s) in Prusa Slicer, select your profiles etc exactly as you do for slicing and then you use File>Save Project As. This will save a .3mf file to the location you specify just like saving any other file. The 3mf file when saved from Prusa Slicer will create a snapshot of your work environment. So it will save the model(s), any modifiers you may be using, placement, and a copy of all the profiles currently selected.
Its the best way to debug things as we don't have to keep asking about all the settings etc. Its also a good habit to save any project for normal use unless doing a 1 off.
These things can be tricky. If you're slightly overextruding, the tolerances that worked for the model's designer may not work for you, so the parts are fused. One thing you can try is to simply scale the model a bit in prusaslicer, say to 105%, to create more space.
I broke open the file to examine the joints; there are a couple of beginner errors but the file should print if the printer is really well set up 'though there are probably some better designed ones somewhere.
First layers are very important for this kind of print - if the pictures show the bottom layer, there is a ways to improve the Z here. And don't print a "print in place" print at draft mode. Start at .2mm resolution.
Generic PETG... Print in place is trickier with PETG than PLA. PETG needs to be very precisely dialled in to avoid seized or irregular moving surfaces. I would try again with PLA or a PETG for which Prusa supplies a tailored profile.
To confirm, your file finally attached fine. I have looked over your .3mf file and it looks to be in order, I was going to make the same suggestion as Diem, try printing the file in PLA and see how it turns out. another suggestion worth mentioning again is you may be over extruding as Fuchsr mentioned above, your image is showing signs of this. I would suggest calibrating the extrusion multiplier for the PETG your using (you never did mention what brand) they are not all created equal.
I love wearing all the Lilla Rose products, and don't wear anything else in my hair since I found them several years ago. Usually I don't wear a high ponytail for taekwondo class, low ponytails work just fine with the flexi sport clips and they never move, even when sparring.
As always, the service and shipment deliveries are absolutely fantastic, no need for return labels, there is simply no reason to return your products or be disappointed. I can only say I wish I discovered Lilla Rose products sooner, since wearing your products my hair is healthier and I have no loose hair or breakage when removing all of your products.
We offer the widest product range of low-flow (mass) flow meters and controllers on the market. Numerous styles of both standard and bespoke instruments can be offered for applications in laboratory, machinery, industry and hazardous areas.
Customer satisfaction, innovation and quality of product and service have been the cornerstones of Bronkhorst's success. Based on our experience, innovation and sense of responsibility, a relationship with Bronkhorst assures Performance for Life.
Learn more about how Coriolis-based flow meters can be used as microfluidic flow meter instead of thermal flow meters. Read the customer story of a microfluidics system builder who used Bronkhorst products.
Are you looking for technical documentation, are you interested to learn more about the measuring principles of Bronkhorst products, or you do want to get in contact with a Bronkhorst Service Engineer? This section will guide you to the relevant service & support topics.
The new standard in measurement & control of mass flow and pressureThe new FLEXI-FLOW Compact series combines fast and stable chip sensors with reliable and accurate bypass technology. The compact, innovative instruments are a quantum leap forward in mass flow measurement and control: Mass Flow Control #Redefined
- Multi-parameter measurement: flow, temperature, and pressure in one instrument
- Simple and secure connection through Bluetooth and comprehensive App
- Superior accuracy through onboard gas database and real time conversion
- NAMUR status indication keeps you informed about your process
- Adaptable to many applications through wide dynamic range of measurement and control
The FLEXI-FLOW Compact series can be used in multiple applications, especially in applications with benchtop bioreactors, analytical equipment and vacuum deposition processes. Read the application stories:
- Gas flow control for benchtop bioreactors with flexible gas flow controller
- Stable gas flow control for analytical instruments
- Stable & fast gas flow control for vacuum deposition by reactive sputtering
Bronkhorst High-Tech designs and manufactures innovative instruments and subsystems for low-flow measurement and control for use in laboratories, machinery and industry. Driven by a strong sense of sustainability and with many years of experience, we offer an extensive range of (mass) flow meters and controllers for gases and liquids, based on thermal, Coriolis and ultrasonic measuring principles. Our global sales and service network provides local support in more than 40 countries. Discover Bronkhorst!
Crafted from flexible yet sturdy food-safe plastic, Flexi Frost provides the perfect balance of flexibility and firmness. Its innovative design ensures a seamless application of ganache or buttercream, allowing you to achieve sharp edges effortlessly.
Flexible-shaft technology is faster and more thorough than traditional drain cleaners. The flexible shaft spins more than 10 times faster than drum machines. At speeds of 2000 RPM or more, the chain cutters quickly grind up stoppages and scour the walls of the pipe. And you can use your camera system to give it pinpoint accuracy.
Hi, I am planning using a flexi mobile pass (10 days within 2 months) and reading the FAQs I am getting confused. From the instructions I understand that I must link a trip to my pass in order to be able to activate the pass starting from X date. But I have also read that the trip I link to my pass cannot be changed once the pass is activated. So, I am wondering how my flexi pass remains then flexible.
Is it because even tough I cannot change the trip linked to my pass, I do can add, remove, change journeys and cancel travel days (until the day before) to the trip linked to my pass? Do I understand right?
But what I am not sure about is: can I still change, delete journeys from my trip and pass after having added them manually by sliding the bar. Or should I do this just before going onboard - just in case?
On the paper pass, you crossed out a date which you wanted to travel on. On that day, you filled out line per line every train you take under the way, just before boarding. This flexibility you still have with the mibile pass, enabling you to take any train you want.
In the mobile app you activate a travel day by tapping on the ledger of your first train of the day (app will ask to confirm the use of a travel day). And than you can add, change or delete as many train journeys as you want.
Some people already activated their travel days weeks in advance. On the day itself they end up ill or there's e.g. a strike, which means changing your plans to later days. But as you don't get your travel days back once you've reached that day, we always advice to only activate a couple of minutes before boarding the first train of the day. Just to avoid any unpleasant surprises.(You can still delete travel days before reaching that day)
All three mounting options; fixed, freestanding or mobile are included as standard so there is no need to decide before you buy. This removes the need for costly sight surveys and associated labor meaning you can make the decision on-site.
Combined with our telltale Urben design features it makes installation faster than ever and servicing the units a breeze.
The all new powerful screen bracket has been engineered for the Flexi to be customizable for mounting different screen sizes; ranging from 49-65 inches. Compatible cameras can be positioned above or below the screen easily with a simple mounting plate.
The bracket and mounting plate have been designed with forward compatibility in mind. To allow for even more flexibility of options coming soon.
Acuron Flexi corn herbicide puts you back in control of the tough weeds other products miss. Combining three active ingredients, including bicyclopyrone, and two sites of action, it delivers a multi-targeted approach to weed management, all with greater flexibility.
Available in one convenient premix, Acuron Flexi controls tough weeds using three active ingredients and two sites of action to deliver a multi-targeted approach for effective weed control. Added flexibility means Acuron Flexi can be used without soil type restrictions and features tank-mix compatibility.
795a8134c1