Tp Link Adapter Update

[Terpsícore Deckelman]

HelloI just bought the UE300 USB 3.0 Gigabit Adapter but I have some issues with it. The first time I plugged it in the USB 3.0 port it was working but the connection speed was very low and unstable (5 Mbs down/1 Mbs up/lost packets/very high jitter) while the speed at the router is 160 Mbs down/15 Mbs up. I tried to plugged it in the USB 2.0 port with all the other devices unplugged from the other USB ports but nothing changed. I was reading on the forum here other users having issues, so I tried everything explained: updated network card drivers, Realtek USB drivers, I did the network factory reset, I tried different Ethernet cables. Now even worse, the adapter is not working anymore at all, as soon as I plug it in while checking in the network settings it keeps showing "Identification pending" and then "Unknown network" and even after starting the Windows network diagnosis it shows "IP configuration non valid". The only way to make it working is plugging the laptop with the adapter directly to the router Ethernet port, so this way it's working at full speed.

yeah I already installed the latest driver, tried other USB ports, different cables and also on my older laptop but nothing changed. When I plug the adapter the LED is on just for a second (with "Verification pending" in network settings) but then turns off immediately, then again after like 30 seconds the same thing; in the end after multiple times doing this the LED stays on with "Verification pending" for like a minute in network settings but then it goes on "Unknown network". The thing is that before doing all these checks, even without updating the adapter drivers, some days ago I tried to plug the laptop with the adapter directly to the router Ethernet port and it worked immediately without any issue.

Another thing I don't understand is how it is possible that the first time I plugged the TP-Link adapter it was detected and I was correctly connected to the network (even though with speed issues and unstable packets transfer) without verification issues like I'm having now, even after uninstalling drivers and device.

Here you can see a screenshot with the information requested. I'm also attaching a picture of the Ethernet Network Troubleshooter that shows the network doesn't have a valid IP configuration and also that the cable could be damaged, but that's not possible because I tried multiple cables, even connecting my old laptop to the ethernet outlet without the TP-Link adapter (it has its own output) and it's working so it can't be the cable.

The KOMODO Link Adaptor provides KOMODO with a USB-C interface to extend the usability of the camera. Directly connect the KOMODO Link Adaptor to an iPhone or Android device and get a live preview with minimal latency via RED_CONTROL. Remote camera control and FTPS* (File Transfer Protocol Secure) functions via Ethernet are also capable if you attach a USB-C to Ethernet adapter (not included) which can be used for the following additional functions:

It is worth mentioning that Intel does not support wireless integrations (installing a different wireless adapter into your system/laptop). We recommend you speak to the Manufacturer of your equipment for support on wireless integrations and replacement parts to ensure compliance with the regulatory requirements of your country and support. It is important to check for compatibility with the System Manufacturer, as there could be certain cards that will not work with the system.

Besides, Intel doesn't support and is not aware of the support or drivers of third-party products such as the Archer wireless cards. If you need assistance with this product specifically, contact the proper manufacturer of this card.

Thanks for your response! Yes I removed the old wireless card and disconnected the connector, inserted the new wireless card into the same PCIe slot and plugged the new card into the motherboard. The old card is no longer in the computer.

@Jocelyn_Intel Thanks for your response as well! That is all good information to know. To be honest I did think it was weird that their driver pack brought me to the intel site. The card came with a CD installation, but my PC does not have a CD rom so their instructions send you to their home page, and when you click on the driver download for that model card it redirects to the intel driver download site. I guess my whole problem is that I'm weirded out that its using the intel drivers, that it works with different intel drivers than the ones it had me download, and mainly that my PC isn't recognizing it as the card that it is but as an intel wireless Adapter. All very strange, but I appreciate the info.

@Podaen Thanks for that link! I will try that. Those steps look very similar to what I have tried a couple times except for using a different PCIe slot and trying to show hidden devices, I'll have to look around for that, but I thought I could see my wireless adapter, and I was selecting uninstall while also checking "remove associated drivers" and then when I was reinstalling the drivers it was showing up as the same wireless adapter rather than the new one of the different brand. But anyway thanks a bunch for taking time to post that help, much appreciated!

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

The YSI EXO link is an adapter that interfaces with any EXO series sonde. The adapter integrates any EXO sonde into an existing 6-Series platform. The adapter fits in line with the EXO sonde on the end of a 6-Series cable.

Copyright 2024 YSI Inc. / Xylem Inc. All rights reserved.

Terms & Conditions of Sale Terms & Conditions of Purchase Legal Disclaimer Privacy Policy Transparency in Supply Chains Do Not Sell Or Share My Personal Information

The system health light is blinking. The ilo states network adapter link down (slot y, port x). This error has occurred in the past and then apparently self-repair has occurred. This time it hasn't self-repaired. The knowledge base describing how to repair has not worked. Other suggestions are sought for repair.

By way of background - to make certain that the system degraded light was not caused by something else I did some checks and could find nothing else at fault (in particular Raid drives all green, temp fine, etc.). If the link repair isn't achieved is it all right to leave the system as is? Namely nothing catastrophic imminent Tks, tj

Thank you for the links. The fixes I looked at with no joy were the ones described in the 1st link. I added the 2nd one to the manuals files. Still seeking other possible repairs and mostly whether there is need to worry about health blinking light. tj

Thank you for your response.. I did do a driver update for the adapter and it stated the driver was the most current. I did not mess with the firmware however because the system is working, other than the blinking health light, so I thought it would be better to not take the chance of making it worse (ie if it ain't broke don't fix it). I have not tried to reset any internal cables. I will check to see if the Anentless Mgmt Service is installed. I would welcome your comment about the seriousness of this error and if it is the only error that is setting off the health light. See jpeg of the Ilo log. Tks, tj

Thank you. I will follow your recommendation, however, I'm a volunteer so I may not be able to do it for a week or two. I'm assuming that it is not an error that would cause the overall system to crash. Correct?

I just did some searching for instructions as to how to update the firmware and was a bit overwhelmed. It appears that some experience is needed as the consequences of doing it incorrectly appear severe. What are the consequences of not updating the firmware?

A 2nd question is how to check the current version on board as it appears the last update was in 2013 and the system wasn't purchased until 2014 so assume it came with the latest update. Sorry for extending this string but truly appreciate your guidance. tj

There are 2 ethernet ports on this device, are there two adapters also?. If so would switching the connection to the 2nd port. possibly eliminate the adapter error? Thank you for your continuing help.

With your adapter plugged in please run lsusb and send us the line that is related to the adapter. It will have a part that looks like ID xxxx:xxxx and that gives us the exact chipset for that adapter.

Manufacturers do update the chipset, even within the same model of adapter, so the driver you are working with may or may not be correct. The link you post leads to this which is certainly not a guide for building the driver. It then leads to a lot of digging to even find your adapter info.

cc0760cbdebe07d9b1c0e6882fa492f661cda90d.png812300 42.7 KB

The guide I found for that adapter is for kernel 4.13 and only shows ubuntu 16.04 so it is rather out of date and certainly may not be able to be followed without modifying the commands, or possibly even the make file.

By continuing to use this site, you accept our use of cookies and other online technology to send you targeted advertisements, for social media, for data analytics and to better understand your use of our website. Click here for more information on the types of cookies we use and how to change your cookie settings.

Experience your favorite music from your SoundTouch speaker with the SoundTouch app. SoundTouch lets you take total control of your listening experience, right from your smartphone or tablet. Browse popular music services like Spotify and Deezer, Internet radio stations through TuneIn, or your stored music library. Easily personalize presets for one-touch access to the music you love, and control one or many SoundTouch speakers around your home.

3a8082e126