maintenance menu on CX?

[John Hanna]

How do I get the maintenance menu on a CX? Need to remove battery???

 

     John Hanna

     jeh...@optonline.net

     www.johnhanna.us

     T³ - Teachers Teaching with Technology

     "A cowchip is paradise to a fly."

 

 

[Epi van Winsen]

I needed three hands with a new CX calculator that did not response to the ON button. I used DOC EE and ENTER with the reset on the back of the calculator. That worked out fine.

From the knowledge base:

For the TI-Nspire™ Family:

1. Remove the keypad (for TI-Nspire) or the battery door (for TI-Nspire CAS) and remove at least 1 battery from each column of batteries. After 2-5 seconds, reinsert the batteries and turn the unit on. This will cause the unit to reboot the operating system.
2. Remove the keypad (for TI-Nspire Family or TI-Nspire CAS Touchpad) or the battery door (for TI-Nspire CAS) and remove at least 1 battery from each column of batteries. After 2-5 seconds, reinsert the batteries and LEAVE THE UNIT OFF (do not turn on and then back off). If the TI-Nspire/TI-Nspire CAS is a Clickpad, hold down [Home] [Enter] [P], and while holding these keys, press [On].  If the TI-Nspire/TI-Nspire CAS is a Touchpad, instead hold down [Doc] [Enter] [EE], and while holding these keys, press [On]. The device will boot up as in the previous reset, but will display a menu with the following options. Please try options 1, 2, 3, and 4 in that order. ** The [Home] key is located at the top right of the TI-Nspire keypad and has a picture of a house on it.

Note: • TI-Nspire family model options 2 and 4 above require that the OS be reinstalled. The reset menu will only display if the unit is off and batteries have been removed/replaced as described above.

Epi van Winsen

-- 
To post to this group, send email to tins...@googlegroups.com
To unsubscribe send email to tinspire+u...@googlegroups.com
For more options, visit this group at
http://groups.google.com.au/group/tinspire?hl=en-GB?hl=en-GB
The tns documents shared by group members are archived at 
https://sites.google.com/site/tinspiregroup/classroom-news/welcome-abouttime

[Nevil Hopley]

John

I refer you back to my posting of April 2011 of how to use Lego to
solve your Maintenance Menu conundrum....

http://groups.google.com/group/tinspire/browse_thread/thread/3b8d3b88bf681200/f764c27f432d24a5?lnk=gst&q=revolutionary#f764c27f432d24a5

.. or just search for the word 'revolutionary' in the TINspire Google
Group search box!

Nevil