Renkforce Usb Dvd Maker Ii Windows 10

2 views

Skip to first unread message

Ted Brathwaite

unread,

Jun 30, 2024, 10:09:11 AM6/30/24

to tinglemonlia

Take the glass off. Remember which side is up. Clean it well with liquid soap or detergent and water and some kind of scraper like a putty knife. Dry it and examine it. If it's perfect, then do a final cleaning with glass cleaner (meant for cleaning windows). Do not touch the surface with your greasy fingers (by now they should have interacted a lot with soap and the oils should be gone anyway).

renkforce usb dvd maker ii windows 10

Descargar archivo >>>>> https://www.google.com/url?hl=en&q=https://tweeat.com/2yPvFb&source=gmail&ust=1719842937684000&usg=AOvVaw0uZZGsBqA7KA6amq7AtbAL

Now ideally you want elmers wood glue. Or any wood glue. Mix that 1 part with 10 to 20 parts water (it's not an exact thing). I like to use a jar with a lid so I can put the lid on and shake it up well. Use a paint brush to paint this onto the glass. Wait until it dries (that's one reason to preheat to 60C). Should take about 2 minutes.

I also tested both the hairspray and wood glue and both worked ok. Not perfect but ok. The bottom layer still is terrible. However, what I found out is that the filament (Renkforce PLA) is absolutely useless. After testing with Ultimaker PLA, I concluded there's probably no better filament for UM3 than Ultimaker PLA!