Midea Set Timer

[Evelio Olivo]

shippingcost for all items only can be delivered to an empty ground floor room, or main apartment building entrance, provided social distancing requirements are adhered to by all parties. Please note that standard delivery does NOT include climbing up stairs, steps, or decks that are more than one. This job may impose extra fees, and the amount depends on the number of stairs.

Courier deliveries: Our courier partners delivering orders are currently experiencing very high volumes and long delivery delays throughout New Zealand, with destinations in Auckland.

Note: Couriers and transport companies are experiencing extremely high volume recently, and there might be delays for up to 10 days at the moment. Please keep patient, and carriers will deliver your products as soon as they could.

Click and collect is now available from our store located at 1/18 Link Drive, Wairau Valley, Auckland. You could choose "pick up" at check out and we will send you an email notification once your order is ready to be collected. Please only come once you have received the notification. Please ensure you have a proper vehicle to load all your items prior to come to collect your purchase.

When accepting delivery or picking up the items, please ensure you inspect the unit carefully and make sure you are completely satisfied with the items (ie no damages, no dents etc) BEFORE you accept the delivery (ie, sign the doc, let the delivery driver go, or leave the collection point). Failing to do so may limit your right to claim such damages after you have accepted the goods.

In terms 7-day right of return and exchange policy, customers can return or exchange store-wide products within 7 days after purchasing. The products should be returned unused, in its original condition with packaging, accessories and not affected for re-sell. In terms over 7-days, returns will be charge 20% restocking fees. This only applies for Midea Home Interior Centre and Midea North Shore Online Shop (www.mideahomes.co.nz) with the sole discretion of Midea Appliances

Remote signal-receiving function

There is the signal receiver for the wireless remote controller on the KJR-29B. You can use the wireless remote controller to control the air-conditioner through the wired remote controller when the system has been powered on.

Notes: The wired controller will not receive the swing controlling instruction. For the indoor unit with swinging function, you can directly use the remote controller to control swinging through the display panel of the indoor unit, or use the swing button on the wired remote controller to control the indoor unit for swinging.

ON/OFF Button

Press the ON/OFF button to control the indoor unit on and off status. When the unit is turned off, press the ON/OFF button, the unit will be turned on and the operating icon lights up. When the unit is turned on, press the ON/OFF button, the unit will be turned off and the operating icon lights off.

Clock setting

Long press the timer/clock setting button for 3 seconds, and then enter into the clock setting status. The hour position of the clock will flash, and can press Temp setting buttons to adjust the hour value. After finish the hour setting, press left button or right button to switch to minute position setting, then the minute position will flash, press Temp setting buttons to adjust the minute value. After finish the clock setting, press the button or wait for 5seconds to confirm and exit the setting state.

Wired controller locking

Press the temperature adjusting UP and DOWN buttons simultaneously, the wired controller enters into locking state, and the locking icon will be lighted up. Under the locking state, the wired controller will not respond to buttons by pressing and the control instruction from the wireless remote controller. Simultaneously press temperature adjusting buttons again can cancel the locking state.

Air filter cleaning reminding function

The wired controller records the total running time of the indoor unit, when the accumulated running time reaches the pre-set value, air filter cleaning reminding icon will be lighted up, to remind that the air filter of the indoor unit needs to be cleaned. Long press left button for 3 seconds, and clear the reminding icon and the wired controller will re-accumulate the total running time of the indoor unit.

Notes: The default setting value of reminding function is 2500 hours, and it can change to be 1250 hours, 5000 hours or 10000 hours. The setting methods please refer to the installation manual.

Swing Function

If the indoor unit supports swing function, press the right button to adjust the air outlet direction of the indoor unit. Long press this button for 3 seconds can turn on or turn off the auto-swing function. When the auto-swing Control system function is turned on, the swing icon will be lighted up.

When the system is running and the operating mode is AUTO. COOL or HEAT, press the left button will activate the Follow Me function. Press left button again will cancel follow me function. When the operating mode is changed, and then will cancel this function as well. When the Follow Me function is activated, the icon will be light up, and the wired controller will display room temperature read from the local sensor, and transmit the temperature value to the indoor unit every 3 minutes.

Connect two terminals of embedded 4-core shielding wire with the switching wires of wired remote controller and signal receiving board. Make sure the sequence of 4 terminals (A/B/C/D) should correspond to the wire sequence of signal switching wires (A/B/C/D).

Avoid water enters into the wired controller, use trap and putty to seal the connectors of wires during wiring installation. When under installation, reserve a certain length of the connecting wire for convenient to take down the wired controller while during maintenance.

3a8082e126