sudo ./'eZ430-Chronos CC 1_2.tcl'
follow the description from update or get data
Best wishes Dan
--
You received this message because you are subscribed to the Google Groups "TI Chronos Development" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ti-chronos-develo...@googlegroups.com.
To post to this group, send email to ti-chronos-...@googlegroups.com.
Visit this group at http://groups.google.com/group/ti-chronos-development-.
For more options, visit https://groups.google.com/d/optout.
Hello Robby!First of all, congratulations on your new watch! It’s not an easy step from an Arduino to the chronos, but be persistant and you’ll soon understand how everything works!To answer your question, there’s a lot of confusion lately because of the new watch models (the one with the white PCB), but in order to update the firmware on your watch, it needs to be in the rfBSL mode. You can get there via the menu. Precise instructions vary depending on which firmware you’re currently running.So, you got nearly everything correct in your steps, but the watch needs to be in rfBSL mode, not in acc mode!
On 15/apr/2014, at 12:44, Robby Balona <ro...@grab.co.za> wrote:
Hi GuysI just received my new ez430 Chronos(White) watch and cannot get the wireless update to work . I have looked at a few sites and they all contradict each other. The manual tells me what to do but its not very clear.This is the process I have followed :Go to the control centerClick start Access Point,Put watch into acc mode and pair itGo to wireless Update and select the file I want to uploadPlush the "Update Chronos Watch" button and ......the "access point" switches off and fails.So how do I get wireless to work, I read a bit about soldering the RF module to the programmer !!! HUH what is that all about??If I cant get it to do wirelesss update , then what app(Linux) can i use to send updates to the watch ?Going to be a big learning curve for me as I come from Arduino where everything is pretty easy to understand.Thanks for the help in advanceRegards
Robby--
You received this message because you are subscribed to the Google Groups "TI Chronos Development" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ti-chronos-development-+unsub...@googlegroups.com.
To post to this group, send email to ti-chronos-...@googlegroups.com.
Visit this group at http://groups.google.com/group/ti-chronos-development-.
For more options, visit https://groups.google.com/d/optout.
To unsubscribe from this group and stop receiving emails from it, send an email to ti-chronos-develo...@googlegroups.com.
To post to this group, send email to ti-chronos-...@googlegroups.com.
Visit this group at http://groups.google.com/group/ti-chronos-development-.
For more options, visit https://groups.google.com/d/optout.