M3065-v Firmware

[Ronald Gruzinsky]

Anew API framework for device configuration, control, and monitoring is launched. The Device Configuration APIs are presented as RESTful APIs with OpenAPI specifications and versioning support. Axis will release new APIs via this framework while gradually transitioning existing ones. Notably, Axis devices have a built-in Swagger UI support for direct API interaction.

Added support for multiple virtual host authentication interfaces. This allows for hybrid setups where Digest/OAuth 2.0 OpenID Connect authentication schemes are used for centralized Identity Access Management (IAM) in active directory federated services (ADFS) and other identity provider (IDP) solutions.

Added the possibility to save maximum ten events on camera memory when the frame selected is "Vehicle Crop", "Frame-downsized 480x270" or "Full frame". License plate crop will store up to 1000 events on cameras memory. SD card will store up to 100,000 events regardless of the frame.

Corrected an issue with stability, where full frame saved with an event and send out through Push Events when there are more than six license plates present within one second could have generated a crash on the analytic.

Added a new SIP Setup assistant that guides users through the entire SIP configuration and usage process, integrating various settings seamlessly. It includes features like reusable configurations and enhanced SIP call testing with logs and status updates.

Applies to: All products with SIP support.

Added Entry list, which allows to set up the device to let the credential holders use their card or PIN to perform various actions, such as opening a door. Credentials are stored locally on the device. Entry list can be used in combination with an external door controller.

Applies to: AXIS A8207-VE, AXIS A8207-VE Mk II and AXIS I8116-E

Enabled two-way audio with echo cancellation. In case that the internal microphone and echo cancellation were enabled prior to the upgrade, the input gain will be reset to 0 because the new solution includes an automatic gain control.

Applies to: AXIS C1410 Mk II

Added three new layouts i.e. wide, narrow and asymmetric.

Added a new action to be able to play any view in any sequence.

Added the possibility to show the image preview in the web interface during configuration.

Limitations in image preview:

Only for cameras, not for videos or images uploaded to the device.

Only in browsers that support h264.

It might not work with third-party devices.

Applies to: AXIS D1110

Added support for encrypted file system that protects the confidentially and integrity of file system stored information against physical information extraction attempts.

Applies to: AXIS D1110, AXIS S3008, AXIS S3008 Mk II and AXIS S3016

Improved functionality when setting the scale of a map calibration.

Added support for radar signal tampering. The event is triggered when the radar is covered by metallic materials.

Applies to: AXIS D2110-VE, AXIS D2210-VE and AXIS Q1656-DLE

Improved and optimized streaming cache values.

Limitation: If you are upgrading from AXIS OS 11.10 to AXIS OS 11.11 or higher and experiencing upgrade issues, we recommend you to do the following:

1. Temporarily disable the following ACAPs: Video Motion Detection, WebRTC and AXIS Object Analytics.

2. Perform the upgrade.

3. Enable the ACAPs you disabled in step 1.

4. Go to the device web interface and select Plain config -> StreamCache.size. Change the value to 100663296.

If the issue persists, a factory default is recommended during the upgrade.

Applies to: AXIS M1135/-E Mk II and AXIS M1137/-E Mk II

Early Fire Detection: Added the possibility to pause the guard tour when the Early Fire Detection ACAP triggers an alarm, allowing the camera to remain in a position where an event of interest occurred.

Added the possibility to detect group deviation i.e. if the temperature of an area deviates from the rest of the group.

Added the possibility to define two or more areas of interest in a scene, to monitor all areas in a group, and to compare their respective statuses.

Applies to: AXIS Q1961-TE/-XTE and AXIS Q2101-TE

Improved reliability when upgrading an ACAP i.e. it is now more resilient to interruptions (e.g., power losses or installation problems) during an upgrade. A backup of application data is taken before the upgrade is started and is kept if the operation was aborted. This data will be restored during the next upgrade attempt.

Corrected an issue where certain resolution and aspect ratio combinations were not displayed.

Corrected an issue where video stopped playing after the monitor was turned off and on again.

Applies to: AXIS D1110

Added support for the "Erase Configuration" action in the event system for all Axis products. Previously, it was supported only by Axis intercom products. Erase Configuration will factory default the device when the action rule is triggered.

Enabled two-way audio with echo cancellation. In the case of having internal microphone and echo cancellation enabled before upgrading, the input gain will be reset to 0 as the new solution includes automatic gain control.

Applies to: AXIS C1210-E

Early Fire Detection: Improved logic for better filtering of moving objects by a new overlay indicating the point of interest when an alarm is triggered.

Applies to: AXIS Q1961-TE/-XTE and AXIS Q2101-TE

Extended the number of preset positions for the built-in Pelco driver from 32 to 100. Additionally, introduced a new config option in plain configuration (UserAdv parameter).

Applies to: All products with Pelco driver support

The Trusted Execution Environment (TEE) is selectable as a secure keystore, providing higher performance and lower latency compared to the high-security and certified TPM 2.0 and Secure Element. More information and guidance can be found here.

Improved object detection and added support for new object classes; HumanFace, LicensePlate, and vehicle sub-classes Bus, Car and Truck. These classes have been added to the RTSP video analytics metadata stream. More information is provided here.

Applies to: AXIS P3727-PLE

To see which classes are supported on your device, use getSupportedMetadata which is documented in the The Analytics Metadata Producer Configuration API. More information is provided in the AXIS Developer Community and the AXIS OS Knowledge base.

Added support for Network radar pairing (Edge-to-edge technology). The radar view will use the second view area to show the radar view when pairing is enabled.

Applies to: AXIS P1465-LE-3 and AXIS P3265-LVE-3

Products with Hardware ID 9F2 only supports active track 11.9. and later. The hardware ID can be found in Plain config > Properties > System > Hardware ID. Read more about hardware changes in AXIS OS Knowledge base.

Applies to: AXIS S3016

Lowered the current to 50 mA on the blue LED on certain speaker products. This is done to extend life expectancy of the blue LED.

Applies to: AXIS C1110-E, AXIS C1111-E, AXIS C1410 and AXIS C1610-VE

ACAP Computer Vision SDK delay

In AXIS OS 11.9, ACAP Computer Vision SDK applications built with ACAP Computer Vision SDK 1.12 or earlier that have a direct or indirect dependency on the library libvdostream.so, as instructed in various acap-computer-vision-sdk-examples, will encounter a runtime error. This occurs despite their successful execution on AXIS OS 11.8 and earlier versions. An update of such applications will be necessary to be compatible with 11.9 and future versions.

An updated ACAP Computer Vision SDK is currently under development, more information will come.

Added support for IEEE 802.1AE MAC Security (MACsec) with Static CAK/Pre-Shared Key (PSK) and Dynamic CAK/EAP-TLS. Dynamic CAK/EAP-TLS is enabled by default.

MACsec can be configured from the security tab in the web-interface and allows for complete layer-2 network encryption between the Axis device and network switch. Read more in the AXIS OS Knowledge base.

Disabled the root-privileged access through the SSH-interface in the factory defaulted state. To allow root-privileged access through SSH. it must be enabled in Settings > Accounts > SSH accounts. Upgrade without factory default will not affect the setting. For more information see AXIS OS root ACAP signing in Developer community and Changes in AXIS OS 11 in AXIS OS portal.

Disabled the root-privilege installation of ACAPs in the factory defaulted state. To allow the installation of root-privilege ACAPs, it must be enabled in Settings > Apps > Allow root-privileges apps. Upgrade without factory default will not affect the setting. For more information see AXIS OS root ACAP signing in Developer community and Changes in AXIS OS 11 in AXIS OS portal.

Added support for containers via ACAP SDK. The purpose of embedded containers is to provide a standardized and portable runtime environment for applications running on embedded systems, enabling faster and more efficient development and deployment of software. For more information visit Axis github.

Applies to: AXIS P4705-PLVE and AXIS P4707-PLVE

Added support for selecting manually 1000 Mbit/s duplex or half-duplex speeds in the web-interface for troubleshooting purposes. Note that this selection is only available for products that support this network speed.

Addressed CVE-2023-5553. Note that downgrading the product to an older AXIS OS version other than the latest supported 10.12 LTS track release is not possible. For more information, please visit the Axis vulnerability management portal.

Applies to: Products based on AXIS ARTPEC-8

Added support for OAuth 2.0/OpenID Connect that provides centralized Identity Access Management (IAM) through active directory federated services (ADFS) and identity provider (IDP) solutions. For more information please visit the OAuth 2.0 OpenID Connect in AXIS OS Portal.

Updated the terminology of "user accounts" in the web interface and renamed to "Accounts" to align with IT-industry standard terminology. Web interface URL changed from /index.html#/system/users to /index.html#/system/accounts.

3a8082e126