Vivado Design Suite User Guide Release Notes Installation And Licensing (ug973)
Bethann Gendernalik
Embedded systems are complex. Hardware and software portions of an embedded design are projects in themselves. Merging the two design components so that they function as one system creates additional challenges. Add an FPGA design project to the mix, and your design has the potential to become complicated.
vivado design suite user guide release notes installation and licensing (ug973)
Download File >>>>> https://3contnajumo.blogspot.com/?fm=2zUhYr
Xilinx offers a broad range of development system tools, collectivelycalled the Vivado Design Suite. Various Vivado Design Suite editionscan be used for embedded system development. In this guide, you willuse the System Edition. The Vivado Design Suite editions are shown inthe following figure.
You can use the Vivado Design Suite tools to add design sources to your hardware. These include the IP integrator, which simplifies the process of adding IP to your existing project and creating connections for ports (such as clock and reset).
You can accomplish all your hardware system development using the Vivado tools along with IP integrator. This includes specification of the microprocessor, peripherals, and the interconnection of these components, along with their respective detailed configuration.
The Vitis software platform is used for software development, and can be installed and used without any other Xilinx tools installed on the machine on which it is loaded. The Vitis software platform can also be used to debug software applications.
The Zynq SoC Processing System (PS) can be booted and made to run without programming the FPGA (programmable logic or PL). However, in order to use any soft IP in the fabric, or to bond out PS peripherals using EMIO, programming of the PL is required. You can program the PL in the Vitis software platform.
This tutorial targets the Zynq ZC702 Rev 1.0 evaluation board, and can also be used for Rev 1.0 boards. To use this guide, you need the following hardware items, which are included with the evaluation board:
Ensure that you have both the Vitis software platform and the Vivado Design Suite installed. Visit the Xilinx Support Page to ensure that you download the latest software version. To install the Vitis software platform, follow the instructions in the Installation section of theVitis Unified Software Platform Documentation: Embedded Software Development (UG1400). When you install the Vitis software platform, the Vivado Design Suiteis installed automatically.
PetaLinux is installed in the petalinux-v2020.2-final directory, directly underneath the working directory of this command. If the installer is placed in the home directory /home/user, PetaLinux is installed in /home/user/petalinux-v2020.2-final.
Refer to Linux Booting and Debug in the Vitis Software Platform for additional information about the PetaLinux environment setup, project creation, and project usage examples. A detailed guide on PetaLinux Installation and usage can be found in the PetaLinux Tools Documentation: Reference Guide (UG1144).
Xilinx software uses FLEXnet licensing. When the software is first run, it performs a license verification process. If the license verification does not find a valid license, the license wizard guides you through the process of obtaining a license and ensuring that the license can be used with the tools installed. If you do not need the full version of the software, you can use an evaluation license.For installation instructions and information, see the Vivado Design Suite User Guide: Release Notes, Installation, and Licensing (UG973).
The reference design files for this tutorial are provided in the ref_files directory, organized with design number or chapter name. Chapters that need to use reference files will point to the specific ref_files subdirectory.
KCU105 Evaluation KitSTEP 1Set Configuration SwitchesSet the SW15-6 in the OFF position.Note: SW15-6 (FPGA_M2) selects the configuration mode for the UltraScale device:0: Master SPI configuration mode1: JTAG configuration modeSTEP 2Connect PowerConnect the 6-pin power supply plug to J15, and turn on the board power with the SW1 switch.Power good LED, DS3, illuminated green indicates power system is good.DONE LED, DS34, illuminated green indicates UltraScale device configured successfully.STEP 3Initialize ConfigurationPress SW4 (PROG) to initialize the Board Self Test.The GPIO LEDs will turn on, then off and the Board Self Test test will start.STEP 4Run the Board Self TestThe Board Self-Test consists of a set of Pass/Fail tests. Each test runs, and when the test passes, the corresponding LED lights. If the test fails, the corresponding LED is off. The Clock, DDR, BRAM, FLASH, and I2C tests run without user input. The DIP, PB, and Rotary tests wait for the user to switch the DIP switches, push the buttons, or rotate the rotary encoder. The LED for the test that is waiting for user input slowly flashes ON and OFF.Board Self-Test Assignments for GPIO LEDs
A Vivado Design Suite: Design Edition, voucher code is included with this KCU105 Evaluation Kit. This Vivado license is node-locked & device-locked to the XCKU040 device.STEP 5Redeem the Vivado Tools License VoucherTo redeem the Vivado Tools voucher code, go to www.xilinx.com/getlicense and enter the voucher code shown below. After it is redeemed, the licenses appear in your entitlement account, and you can generate a license file, which will be emailed to you. For additional assistance redeeming your voucher, go to www.xilinx.com/kits/voucher.Note: This voucher code can only be used once and must be redeemed within one year of purchase.ImportantSTEP 6Install Vivado Design Suitea. To install the Vivado Design Suite go to www.xilinx.com/download and select and download the latest version of the Vivado tools for your operating system.b. When you get to the Vivado License Manager GUI in the install flow, under the Get License heading, select Load License. Click Copy License button. In the Select License File dialog, navigate to where you saved the license file that was emailed to you in Step 5. Select the .lic file and click open.c. If you need assistance, review the Vivado installation guide at www.xilinx.com/kits/vivadoinstall.Next StepsLearn MoreTo learn more, please go to the next steps page (www.xilinx.com/kits/kcu105-next steps) which provides an extensive collection of resources, including tutorials, instructional videos, detailed reference design guides, schematics, hardware user guides, and other reference designs to move you from the evaluation and learning phase to developing your own product.SupportFor support options related to this product, see the Xilinx support website at www.xilinx.com/support/index.htm.WarrantyFor product warranty, go to www.xilinx.com/kits/warranty.
93ddb68554