My electronic sheet of THOR+

680 views
Skip to first unread message

Danny Van den Heuvel

unread,
Feb 11, 2017, 11:59:17 AM2/11/17
to Thor: OpenSource 3D printable Robotic Arm

I made a complete electronic sheet of my THOR+ robotic arm
Components used:
1x Main controller board Ultratronics Pro V1.0 based on arduino due
6x Polulu stepper driver 8825 cooled max 2A - 24V
1x Logic shifter 3V3 <> 5V 8 channels
1x USB Host PCB with flashed software PS4 controller to TTL serial connection
1x Bluetooth dongle 4.0
1x Slipring 24 wires max.2A for each wire
1x Arduino Nano
1x Neo pixel ring (gripper)
1x Servo motor (gripper)
1x Stepper motor (base) 17HS16-2004S1 (2A) 24V
3x Stepper motor geared 17HS13-0404S-PG5 (400mA) 24V
3x Stepper motor 17HS13-0404S (400mA) 24V
2x Fan 24V 40x40x10mm




It becomes time to assemble it! So next week I'll try to put it all togetter.
In the meanwhile I'm gone put all drawings and stl files online this weekend.
And after all these works I finnaly can program back on my GUI controller software :-)
In the next comming weeks I will have a real moving robotic arm, Yeah...

Oliver Schumacher

unread,
Feb 13, 2017, 2:26:45 PM2/13/17
to Thor: OpenSource 3D printable Robotic Arm
Hi Danny, looks promissing.

did you finalice you Software?
I have played with your rob_gui it realy cool.
Did you post your source code on github or will it not be opensource ?


CU Oliver

Ángel L.M.

unread,
Feb 14, 2017, 12:45:23 PM2/14/17
to Thor: OpenSource 3D printable Robotic Arm
Amazing work, as always :)

Danny Van den Heuvel

unread,
Feb 18, 2017, 7:29:12 AM2/18/17
to Thor: OpenSource 3D printable Robotic Arm
Hay Oliver,

It will be opensource, I will release it when it's mature enough :)
I've been working on different parts of thor, soft & hardware for the moment.
I wanted to make it as complete as it can be, no deadlines.

Анастасия Писарева

unread,
Apr 22, 2018, 9:54:36 AM4/22/18
to Thor: OpenSource 3D printable Robotic Arm

Hi, I’m also developing the project alike to Thor and I noticed that you were doing the same, what about your progress?


суббота, 18 февраля 2017 г., 15:29:12 UTC+3 пользователь Danny Van den Heuvel написал:

Анастасия Писарева

unread,
Apr 22, 2018, 9:58:41 AM4/22/18
to Thor: OpenSource 3D printable Robotic Arm


суббота, 11 февраля 2017 г., 19:59:17 UTC+3 пользователь Danny Van den Heuvel написал:

André Meier

unread,
Feb 9, 2019, 7:09:06 PM2/9/19
to Thor: OpenSource 3D printable Robotic Arm
Hi Danny great work!
As I see, you have the Ultratronics PRO, please can you be so kind to have a look on the Ethernet chip, what kind of chip is it? I would like to to upgrade my non Pro version.


Am Samstag, 11. Februar 2017 17:59:17 UTC+1 schrieb Danny Van den Heuvel:
Reply all
Reply to author
Forward
0 new messages