Hydraulic Log Splitter For Excavator
Totaly Pavlina
Looking for another productive excavator attachment? The Split-fire 4409 excavator Mount Wood splitter is a similar design to the 4209 excavator log splitter but is equipped with both a 2-way and 4-way knife. Sit in your excavator and bust large logs down with the 2-way knife, then switch to the 4 way and re-split those larger chucks into manageable firewood. Knife changes are done in less than a minute via a quick-change pin. A very efficient setup with a good operator on a small to medium excavator.
Log splitter for excavator from 5 up to 12 tons.
Suitable for chopping large logs of wood already cut in extreme speed, ease and safety.
Pre-splitting wood allows a natural drying process and as a result, an increase in biomass quality and energy yield.
As an option it can be equipped with an hydraulic rotator which guarantees a 360 performance.
The splitter is normally mounted on an excavator and uses the hydraulic power of the carrier. But it can easily be used on a crane or custom carrier, it all depends on the type of project. The simple installation method allows it to be moved from carrier to carrier without any major modifications, so the same splitter can be used in many different types of applications.
For large-volume rock excavation in hard rock, there is simply no mechanical method more efficient, safe, and quiet than Yamamoto Hydraulic Rock Splitter. This is the reason it has been used worldwide in some of the most challenging construction projects.
The working principle of the Yamamoto Rock Splitter is based on two counter wedges inserted in a pre-drilled hole. A hydraulic cylinder pushes out a center wedge between the counter wedges to spread them apart and the rock is forced to crack.
Contact us Accessories Arm System for Horizontal Applications Media Gallery Photos Video View more videosCheck out all our ShearForce Videos at our YouTube Channel.Youtube Channel Industry This equipment is utilized in the following industries:
Hydraulic splitter, also known as rock splitter or darda splitter, is a type of portable hydraulic tool. It is used in demolition jobs which involve breaking large blocks of concrete or rocks. Its use in geology was first popularized by volcanologist David Richardson.
The darda splitters have been manufactured by a German company, Darda and by many other manufacturers. Large size darda splitters mounted on excavator is manufactured by Yamamoto Rock international and Splitstone.Splitstone manufactures both portable and larger splitters.
The piston splitter consists of one hydraulic power pack and one or more cylinders which has(have) one or multiple pistons on cylinder body and connecting hoses between the power pack and the cylinders.
Piston splitters have been used for demolition of rocks in building foundation, tunnels, shaft digging, trench work, quarrying and zoo areas. Large size piston splitters are mounted on an excavator for more efficient demolition.
Splitting BIG logs and stumps requires a log splitter attachment and the hydraulic power to turn it. Look no further than your excavator to split large wood down to size. Excavators are one of the best platforms to split with because you can easily rotate and boom out to split a lot of wood before you need to clean up the split material. Plus, excavator hydraulic performance is usually plenty to turn an excavator cone splitter in the gnarliest of wood.
There are a few types of log splitter attachments out there for excavators. You may have seen the beam style firewood type log splitter that fits on the excavator boom. These log splitters are mounted so you can boom down from the top and split logs. The splitter is oriented upside down when compared to a common backyard style firewood splitter. Beam excavator log splitters are limited in the diameter and length they can split. Most won't split more than 24" in diameter and the throat capacity is usually under 4 feet.
Excavator cone type log splitter attachments are available for mini to full size excavators. The auger cone splitter mounted to an excavator can terrorize just about any diameter log you want to split. While splitting really large diameter wood, you can position the cone splitter near the edge. You don't have to run it down the center of the log where it's the thickest. Length is still a concern for mini excavators, but you can generally split up to about 12 feet long material depending on the wood species and the hydraulic flow of the mini excavator.
Splitting BIG wood is a harsh environment. Look for a tough attachment that can stand up to splitting all day, everyday. Quality components are critical to the cone splitter lasting on your excavator while splitting. Hardened steel threaded tips are the tip of the spear, and take a lot of abuse from heat and contacting hard objects. American made is another big plus with a company that stands behind their attachment. Innovation is another positive attribute. Attachments that are built for splitting efficiency and production are key to your business growing. U.S. Pride Products excavator log splitter attachments check all the boxes. Their quality and splitting effectiveness are unrivaled in the industry.
Mini excavators are a very productive platform to split from. All of the qualities an excavator brings to the table are there, except in a scaled down model. Mini excavators are maneuverable and use their boom to reach out over log piles just like full size excavators. This makes them ideal to use on a yard or on a job location where their compact size and portability are ideal. While they don't split the size material that big excavators do, they make up for it in these other ways. Now with an available thumb bracket, you can easily clean up the split logs for further processing or stacking.
Large excavators are right at home splitting the biggest of the big wood. Boom reach and hydraulic power make them the ideal log splitter. These log splitters can take on 4' and larger diameter logs. No other attachment can do that efficiently. Log length is not a concern as you can work your way down just about any length log to split it. Now with an available rotating grapple, one operator can split and clean up the pieces for further processing in a firewood splitter, tub or horizontal grinder or chipper.
The JCS40 cone log splitter is designed to fit mini excavators from 6,500lbs to 30,000lbs. It is a perfect attachment for handling those large diameters of timber that may otherwise be difficult to process. The high torque motor and specially designed cone give excellent performance and splitting ability. See the table below for a full specification list.
The entire JCS range of splitters are supplied as standard with a pin-on excavator bracket (others available on request), drive unit and cone. Hydraulic pipes and couplers are not supplied. Whilst these cone splitters are commonly fitted to 360 excavators, they also work well on other machines such as skid steers and front loaders - brackets for these machines are available on request, please ask us.
The JCS40 makes the task of splitting timber easy, no more cutting by hand with a chainsaw! Enjoy the comfort of your cab and speed up the job all at once. The JCS hydraulic cone splitters enable the operator to safely, quickly and efficiently split down timber for firewood, split lengths or further processing. The tips of the cone are fully replaceable so should you accidently damage it you won't face the cost of replacing the whole cone. All of the JCS cone splitters are bi-directional drive which means you can use the attachment to move timber whilst you're processing it. Simply screw in enough to hold the timber, maneuver, then reverse the screw to drop it. Whether you are a commercial wood processor, or just a private user with your own timber to split, this is a must have attachment!
The cone splitter attachment requires only one man and machine to break down commercial volumes of large timber, in a fraction of the time and cost compared to more labor intensive alternatives. If you are a commercial firewood producer or just have your own timber to split, investing in a hydraulic cone splitter attachment will pay dividends.
Every JCS cone splitter model adopts a very heavy duty chassis, hydraulic motor and cone system, allowing it to sustain frequent use and the most arduous conditions, making them capable of splitting both small and large pieces of lumber.
Hydraulic Grab is a high efficient equipment to handle waste steel ,iron,mineral,rubbish or other irregular massive material which replace human under various conditions.The unique designed jaw curve is perfect for grabing waste steel,iron and other irregular massive material.It owns 2-6 jaw,each jaw drived by an individual oil cylinder to insure the materials won't leak.
Hydrauilc grab belongs to hydraulic structural product. It is combined by hydraulic cylinder,grab bucket (jaw), connection columns, ear plate, earmuffs, bucket teeth, tooth block and other spare parts.The key driving parts is hydraulic oil cylinder. Excavator used hydraulic grab is divided into rotary and non-rotary two kinds .The non-rotary grab use the excavator oil pipeline which means it do not need additional hydraulic valve block and pipeline.Oppositely,the rotry grab need addtional hydraulic valve block and pipeline to operate.
1.Digging construction foundation, deep hole or load soil,sand,coal,macadam etc.
2.Digging and loading on the limited side of the channel or space
3.Loading,stacking and transportation waste steel,crushed aggregates, saw dust, ballast in iron and steel enterprises,port,wharf,railway station,storage etc.
1. Q:How to chose the suitable model?
A: Please kindly advise your excavator weight or model, then we will help you to decide the suitable model.
2. Q:Is your size can be custome made?
A:Yes, we can custom made according to your requests.