Zelio Schneider Plc

[Floriana Grundy]

Basically, a coi acceptor sends a pulse to an input, everytime it's received adds 66 seconds on an operation block, when another pulse is receive, adds another 66 seconds (at this point there's 138 seconds) When another input receives an signal, the timer starts, when it reaches zero it resets.

I think that you can't do it with this progamable relay, cause i can't see for now anything that alow you to change the value on the timer and/or counter, cause you can use a counter and a 1 secunde pulse generator.

The plc is a sr2b201bd, it allows FBD programming, my experience is with TM221c24t in wich i have the timer made, that was what i was triyng to send. However can't seem to transform it to zelio soft 2.

Consider restructuring your algorithm to use a fixed-duration timer and an up&down counter. The fixed timer would pulse the counter down and reset itself each time it completes, and only run when the counter > 0. The coin interface would pulse the counter up.

c80f0f1006