Joao, when gesture mode is enabled it stays enabled when each of this
action is executed separately, however if i run the whole task (all
actions) the gesture mode gets disabled. Can you look into it so we
can get it consistent? (android 8.1 stock no-root)
Profile: 6am
Time: From 06:06 Till 06:12
Enter Task: Pocket
A1: WiFi [
Set: On ]
A2: Bluetooth [
Set: Off ]
A3: Media Volume [
Level: 15 ]
A4: ADB Wifi [
Command: pm disable-user
com.ideashower.readitlater.pro
Timeout (Seconds): 10 ]
A5: Wait [
MS: 0
Seconds: 3
Minutes: 0
Hours: 0
Days: 0 ]
A6: ADB Wifi [
Command: pm enable
com.ideashower.readitlater.pro
Timeout (Seconds): 10 ]
A7: Wait [
MS: 0
Seconds: 5
Minutes: 0
Hours: 0
Days: 0 ]
A8: AutoInput Unlock Screen [
Configuration: Unlocking Screen.
Android 7 and above:
This will only unlock your screen if you're using a
non-secure lock screen or if Smart Lock (Trusted Places, Trusted
Devices, etc) is currently active.
Android 6 and below:
it's highly recommended that you use the Tasker 'System Lock'
action at the end of this task. If you don't, your screen's lock will
be permanently off and your system might even become unstable.
This action WILL NOT work with a secure screen lock even if
you are using Smart Lock. It will only work if you have screen lock
security set to none or swipe.
Timeout (Seconds): 10 ]
A9: AutoInput Screen Off/On [
Configuration: Screen Off Or On: Turn On
Timeout (Seconds): 60
Structure Output (JSON, etc): On ]
A10: Launch App [
Package/App Name: Pocket ]
A11: AutoInput Actions v2 [
Configuration: Actions To Perform: click(point,550\,2000)
click(point,320\,320)
Not In AutoInput: true
Not In Tasker: true
App To Act In:
com.ideashower.readitlater.pro
Separator: ,
Check Millis: 1000
Timeout (Seconds): 60
Structure Output (JSON, etc): On ]
A12: Wait [
MS: 0
Seconds: 3
Minutes: 0
Hours: 0
Days: 0 ]
A13: AutoInput Screen Off/On [
Configuration: Screen Off Or On: Turn On
Timeout (Seconds): 60
Structure Output (JSON, etc): On ]
A14: Wait [
MS: 0
Seconds: 1
Minutes: 0
Hours: 0
Days: 0 ]
A15: AutoInput Actions v2 [
Configuration: Actions To Perform: click(point,550\,1620)
Not In AutoInput: true
Not In Tasker: true
Separator: ,
Check Millis: 1000
Timeout (Seconds): 60
Structure Output (JSON, etc): On ]
On Sat, Sep 23, 2023 at 8:35 PM Matevz Leskovsek