ADAL.DLL Error
Cindy Hayes
Operating system: Windows 95a
Network: --Other--
I am receiving an error message stating "Invalid Page Fault in Module
ADAL.DLL" when I attempt to open my calendar. PLEASE DO NOT SEND ME
TO YOUR KNOWLEDGE BASE FOR THIS!!!! I have already been there and
run the Regedit file and followed all the directions listed. This
solution DID NOT WORK!! Do you have any other suggestions?
Chris Underwood [Symantec]
Hello Cindy,
It sounds as if the database may be corrupted. I would recommend that
you try these steps to see if it helps.
This final repair involves creating a new empty copy of your master dB
and synchronizing the old dB into the new dB. It will have a new name
and will be the one you use when the steps are completed.
To create the Empty copy and then synch the old to the new, follow
these instructions:
1) Open the dB of concern.
2) Select FILE / Save-copy -AS.
3) Select Empty Copy. ( This will give you all the field definitions
and drop downs)
4) Give the new dB a name you can work with because it will be your
new dB. Do not give it the same name as the original dB of concern.
5) When the Enter the My-Record fill in screen appears select the
"SELECT" option on the right.
6) From the "Select My-record" screen, pick your My-record. they are
listed by Last name first.
7) After the New Empty dB has been created, open it.
8) With the new dB open, Select FILE / Synchronize.
9) Select Apply only. Deselect Send.
10) Select SETUP.
11) Select "Direct Synchronization with another database" and then
NEXT.
12) Locate the Original dB of Concern. Then NEXT.
13) Leave Notes/History and Activities selected. Then NEXT.
14) Select "All groups and all contacts". Then NEXT.
15) Select "Send and Receive private data". Then NEXT.
16) Select "Don't send...". (The reason is we got the field
definitions on the create of the empty copy.) Then NEXT.
17) Select "Send All Records This Update Only". Then FINISH.
18) Back at the Synchronization screen select "Synchronize".
When this has completed you will have a new dB with all records,
groups and Users.
Since the dB appears to be shared, you will need to go into FILE/
Admin... / Define Users and enable them for log on.
Let me know if you have any further questions.
Chris Underwood [Symantec Corp.]
Please continue to post your messages to the public discussion groups
as Symantec does not provide support via private email.
If you have difficulty getting a response, please read the following
article:
http://service1.symantec.com/SUPPORT/sharedtech.nsf/docid/1998527114414
For free technical support newsletters, Knowledge Base support
articles, our Online Support Genie, and FAQs, visit our ACT! support
page: