SMD electronics

[karl knodler]

I saw you have a heat gun, which when i asked Chatgpt said it would work for soldering on some components. But it strongly recommended a hot air station, i saw Youtube videos how they do it with a heat gun, so i trust it works. I want to make a transparent flexible PCB version of a guitar pedal I got from Russia that i repaired today.

[kris]

I believe there is a hot air rework station at the space, and an smd oven too,

I wouldn't use a heat gun as they are too hot and wide

Kris

On 11/4/26 19:04, karl knodler wrote:

I saw you have a heat gun, which when i asked Chatgpt said it would work for soldering on some components. But it strongly recommended a hot air station, i saw Youtube videos how they do it with a heat gun, so i trust it works. I want to make a transparent flexible PCB version of a guitar pedal I got from Russia that i repaired today. --
You received this message because you are subscribed to the Google Groups "Robots & Dinosaurs" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sydney-hackspa...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/sydney-hackspace/d6650d8e-e0bd-4436-82c9-4708fe16cb23n%40googlegroups.com.

[karl knodler]

Thanks. I’d need help using it the first time. 

To view this discussion visit https://groups.google.com/d/msgid/sydney-hackspace/591f6698-8065-4ad8-ab76-797cfdc5fcce%40sleepingplanet.com.