column "prf" does not belong to table .:rte file print error on Subbasin: 1

[Pouya Khalili]

Hi all,

Does anyone know how to solve this error in the write swat database tables files?
column "prf" does not belong to table .:rte file print error on Subbasin: 1

Thanks

[GIS Quest]

If you got the solution, can u please help me?

thank you.

[kindl...@gmail.com]

Hi All,

Has anyone found the solution for this? 

I tried 'database update' and then create the rte table. I did not receive any error but when I checked rte file additional parameters can be found in lines (line 26-30, see attached picture).

  
I think the problem is not fixed, and I would greatly appreciate it if users can provide me with suggestions.

Thank you! 

[Natalja C.]

Hello,

Could you show where exactly you are getting this error. I think you are talking about ArcSWAT interface and not swat.

Best,

Natalja

[kindl...@gmail.com]

Hi Natalja,

Yes, this is about the ArcSWAT interface, and I am sorry if this is not the right place to post. I was following the thread to see if the original author or others could solve this error.

I am trying to set up a SWAT model using ArcGIS 10.5 and ArcSWAT 2012.10.5.24. 

I have successfully set up several SWAT models in the past using ArcGIS 10.3 and ArcSWAT2012.10.3.19., and this is the first time I encountered this error.

First, I received this error (column "prf" does not belong to table .:rte file print error on Subbasin: 1) when I tried to 'Write SWAT input tables.' 

Then, I tried 'database update' and then recreated the rte table (The approach I tried above was a suggestion I found on the ArcSWAT forum.)

Then, when I checked created *.rte files, four additional parameters can be found in lines (line 26-30, see attached picture).

After that, I was able to run the simulation without any issue, but I was wondering whether those additional parameters are supposed to be in the rte file or not. 

I said those four parameters were additional because when I used arcswat 2012.10.3.19 those four parameters were not in the SWAT2012.mdb file and were not written in the *.rte files.

 

I checked the SWAT2012.mdb stored in the ArcSWAT Databases folder (D:\SWAT\ArcSWAT\Databases; I installed ArcSWAT2012.10.5.24 on my D drive), and I found that below 'CH_EQN' there were 16 additional parameters in the 'rterng' tab.  

I guess that additional parameters were written in the *.rte file because they were in the arcswat 2012.10.5.24's SWAT2012.mdb. 

I checked the SWAT release note and I did not find any description about adding parameters in rte tab or file, so I am wondering whether I installed arcswat correctly or not.

I would appreciate it if you can provide me with any suggestions or comments as to how to solve this error.

Thank you.

Vincent

[Setareh Amini]

Dear Mr. Khalili,

Did you solve this problem? I have faced the same error and it would be my pleasure to guide me.

Thanks 

Setareh Amini

[jorge.rd...@gmail.com]

Hi everybody how are you?

I have the same problem, someone was able to solve it, if you could guide me on how to solve it?

My SWAT worked very well on its own, I formatted my PC because it needed maintenance and I installed the same operating system (Windows 10), the same version of ArcMap (10.6) and its corresponding version, and run SWAT, with any project, in different zones gives me the same error and I don't know what it is due to if I did the installation correctly.

Greetings.

[Ms. GIS]

don't use an old swat2012 database. The problem was able to solve it.

Vào lúc 22:31:13 UTC+7 ngày Thứ Bảy, 24 tháng 12, 2022, jorge.rd...@gmail.com đã viết:

[Smriti Shrestha]

Hi everybody how are you?

I have the same problem, if someone was able to solve it, could you please guide me on how to solve it?

[Nancy B. Sammons]

Smriti Shrestha:

Please review the link I have included from the ArcSWAT Google group.   

 

https://groups.google.com/g/arcswat/c/zbmCcci478o/m/yFVRpwPcAQAJ

 

Nancy

 

From: swat...@googlegroups.com <swat...@googlegroups.com> On Behalf Of Smriti Shrestha
Sent: Monday, April 10, 2023 2:26 AM
To: SWAT-user <swat...@googlegroups.com>
Subject: [SWAT-user:12454] Re: column "prf" does not belong to table .:rte file print error on Subbasin: 1

 

You don't often get email from shrestha...@gmail.com. Learn why this is important

--
You received this message because you are subscribed to the Google Groups "SWAT-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email to swatuser+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/swatuser/3222e563-600a-4b6d-8e41-a350052f5b42n%40googlegroups.com.