SWAT+_gwflow model error

[Theo Rossouw]

Dear Members,

Trust you are well.

I have been attempting (for the past week) to make use of SWAT+ and gwflow interface for assessing the groundwater and surface water interaction on a project. 

I came across two issues and is hoping for assistance:

1. The first issue is the Aquifer Hydraulic Conductivity in the gwflow.ini file. It seems the values do not correlate to the input raster.

2. Secondly , I am running into an execution error (please see attached screen shot). Also output to follow. 

 

I did account for the following:

1. Turn off Groundwater-wetland exchange = 0.

2. Changed the code for Floodplain calculation code from 2 to 1.

3. Raster (e.g. DEM, aquifer thickness, etc) extend further out than project area.

Please see attached for the TextinOut folder.

forrtl: severe (408): fort: (11): Subscript #1 of the array GW_STATE has value -842150451 which is less than the lower bound of 1 Image PC Routine Line Source rev61.0_64debug.e 00007FF64716D0F0 GWFLOW_SIMULATE 594 gwflow_simulate.f90 rev61.0_64debug.e 00007FF646F41E18 COMMAND 268 command.f90 rev61.0_64debug.e 00007FF6466167CE TIME_CONTROL 255 time_control.f90 rev61.0_64debug.e 00007FF646D3D64B MAIN__ 116 main.f90 rev61.0_64debug.e 00007FF647F06DEB Unknown Unknown Unknown rev61.0_64debug.e 00007FF647F07519 Unknown Unknown Unknown rev61.0_64debug.e 00007FF647F07432 Unknown Unknown Unknown rev61.0_64debug.e 00007FF647F072EE Unknown Unknown Unknown rev61.0_64debug.e 00007FF647F0758E Unknown Unknown Unknown KERNEL32.DLL 00007FFD8A017374 Unknown Unknown Unknown ntdll.dll 00007FFD8B69CC91 Unknown Unknown Unknown

Thank you - hopeing to hear from you.

Regards

Theo