SWAT+ editor running error

[Dr. N S Abeysinghe]

Dear All

Please help me to solve the issue. 

When I run the SWAT+editor. it gave me the error attached and when I run again it gave me a result without error, but When I went to check the ' RunSWAT+Check. I found an error.

 So I ran once again, I found the same error

What would be the cause for the error ? please help me 

Thanks in advanced  

DISCLAIMER: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the sender immediately by replying to this email and delete the message from your system. Any unauthorized dissemination, distribution, or copying of this email or its attachments is strictly prohibited. Rajarata University of Sri Lanka reserves the right to monitor, review, and disclose the content of all email communications through its networks in accordance with applicable laws and regulations.

[Vicente Ulices Archibold Lasso]

Buenas tardes.

Te recomiendo que regreses a la creación de los HRU y los crees nuevamente, pero sin crear archivos shepfile de floating ...

Saludos 

--
You received this message because you are subscribed to the Google Groups "SWAT+ Editor" group.
To unsubscribe from this group and stop receiving emails from it, send an email to swatplus-edit...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/swatplus-editor/7ddc65c4-f720-43b4-8b11-27c672117a32n%40googlegroups.com.

[Dr. N S Abeysinghe]

Dear Saludos 

Thanks a lot dear Saludos 

Yes, after I created my HRUs, I found some voids also. Will that be the problem? 

What is mean by floating shepfiles..? 

Anyway, I will try making HRUs once again. May be the error is in Soil file. I used gSSRU.. gridded soil data to the area

Sorry I response to you in English as I dont know your language 

Thanks a lot 

Prof. N.S.Abeysingha ( PhD Water Science and Tech.) 

Department of Agric Engineering and Soil Science

Faculty of Agriculture

Rajarata University of Sri Lanka

[Dr. N S Abeysinghe]

Dear All

Still I am struggling to solve my SWAT running issue. I am new to SWAT+, 

As suggested, I just changed my HRUs number by changing the HRU definition, then No of HRUs increased. 

However, when I run the model, I got the attached message and I went to see my Output.txts and there was a warning. of weather file. It is also attached. 

However, I gave rainfall, temperature and radiation as weather files and expected WGN ( which I created) to get the other respective weather elements. 

What would be the cause for the error? 

If anybody can share their experience , it is greatly appreciated. 

Thanks 

N.S.Abeysingha ( PhD Water Science and Tech.) 

Department of Agric Engineering and Soil Science

Faculty of Agriculture

Rajarata University of Sri Lanka

[Vicente Ulices Archibold Lasso]

Buenas tardes....

Regularmente, sí los mapas de uso de suelo y suelo no se cargan correctamente brindan error durante la creación de los HRU.

Los archivos shp floating, son las capas que el modelo genera de los márgenes de los ríos o paisajes. Deduzco que, como no son áreas homogéneas, el modelo no las simula.

Espero haber podido ayudar

Saludos

[Dr. N S Abeysinghe]

Dear All

Still I have the same issue, as attached. Please help me to make this model RUN. 

I want to know .... 

1. 1.   When I make my weather files, I used 2012 format and allow SWAT+ to make it SWAT+ format. It has done it and I found some mismatches of SWAT 2012 and SWAT+ format at the end dates (4 days difference) as the SWAT+ format consider 365 days format.

Will it be the reason for my model error of running ?  However, I did not allow model to run up to that level ( end of the time period)  

2.   2.   My HRU map has some spaces or void like area, according to my HRU definition, some landuses and soil types has not taken into consideration.

Will it be the reason for the error?

3. I am running my model in D drive ( hard disk partitioning) while my software for SWAT plus is in C Drive. Will be an issue ?  

I am attaching the error message and also the TxInOut file 

it is greatly appreciated if someone can help me to solve the issue 

[Jaclyn Tech]

1. Check for leap years if they are skipped maybe that is causing the missing days when converting formats?

2. Hopefully a modeler can help answer this question. :)

3. This is not a problem so long as you have write access to your project folder.