SWAT CUP SUFI2 calibration issue - The program run for many days without get me the result

[Camilla Hellen P. de Lima]

Dear forum,

This is my first time using SWAT CUP. I checked some videos on-line and read the manual and some materials. However every time I put the SWAT CUP to run it take days without any result. I thought it was the number of parameters that I was using (i tried 13 that i got from previous studies in the same area) or the number of simulations (i tried 500 and changed to 10), but i tried different number of parameters and simulations and the program would run many days without finalize. I attached here some pictures of my input and the message that I gives when i close the simulation, other pictures of the input can be found in the link due the limitation of the number of files that i can attach in this message https://drive.google.com/open?id=0B-o2pEr1amD1LWU5VFBKVkh0aEE.

2 parameters for the last test CN2 relative min -0,1 max 0.1, Alphabf replace min 0.1 max 1. 

Number of simulations is 10

Number of observed variables is 1

I am going to work with sub-basin 3, so FLOW_OUT_3

data points is 37 at monthly scale between jan-2012 to jan-2015

Number of reaches is 24

I really appreciate if some one could explain to the message or what kind of mistake I may be doing during the process. Thank you so much.

Kind regards,

Camilla Lima

[Abbaspour, Karim]

This is usually because there is something wrong with your observed files, as the extract program cannot properly extract data. The problem is usually with timing, or the number of data points. Also make sure you are using the latest version of the program.

Karim

--
You received this message because you are subscribed to the Google Groups "SWAT-CUP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to swat-cup+u...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

<1.jpg>

<2.jpg>

<3.jpg>