Copy your all swat input and output into the swatcup folder you created and start again the calibration process from the starting
It helped me
Try once
swat-cup is taking too long to run, not loading after this.please suggest possible causes
--
You received this message because you are subscribed to the Google Groups "SWAT-CUP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to swat-cup+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/swat-cup/d35012bc-ef9e-4e7b-8d41-134f8ff329e7n%40googlegroups.com.
For this
> Copy swat2012.exe from arcswat
> Paste in swatcup project folder which you had created
> Rename it as swat.exe
I hope this will solve your problem
Then only calibrate .
swat-cup is taking too long to run, not loading after this.please suggest possible causes
--
To view this discussion on the web visit https://groups.google.com/d/msgid/swat-cup/CAH_KAN9443z4DLw%3DTuM7Umqf%2BSjooFNSby-5w4rXHCGj8qU_FQ%40mail.gmail.com.