output files does not exist.

[Poorya Nkh]

Hi All,

I'm running SWAT-CUP for my sub-basin. At first, I run my model for 5 simulations to see if it gives any errors. After the simulations complete it gives an error about my   "echo_goal_fn" file, i check it and see that "reading observed file" part in the file is not in order, and at the end it gives an error that it couldn't fined any outputs ( best_sim, best_par, new_par, ...) . can anyone please help me with this?

[Poorya Nkh]

My " echo_goal_fn" is attached.

[Abbaspour, Karim]

Make sure you put these everywhere in increasing order.... 1,4,5,8...

Karim

SUFI2.OUT/FLOW_OUT_35.txt

2- SUFI2.OUT/FLOW_OUT_33.txt

3- SUFI2.OUT/FLOW_OUT_16.txt

4- SUFI2.OUT/FLOW_OUT_15.txt

5- SUFI2.OUT/FLOW_OUT_23.txt

6- SUFI2.OUT/FLOW_OUT_11.txt

7- SUFI2.OUT/FLOW_OUT_9.txt

8- SUFI2.OUT/FLOW_OUT_10.txt

9- SUFI2.OUT/FLOW_OUT_8.txt

10- SUFI2.OUT/FLOW_OUT_31.txt

11- SUFI2.OUT/FLOW_OUT_37.txt

12- SUFI2.OUT/FLOW_OUT_5.txt

13- SUFI2.OUT/FLOW_OUT_1.txt

14- SUFI2.OUT/FLOW_OUT_19.txt

15- SUFI2.OUT/FLOW_OUT_4.txt

16- SUFI2.OUT/FLOW_OUT_36.txt

--
You received this message because you are subscribed to the Google Groups "SWAT-CUP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to swat-cup+u...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

<echo_goal_fn.txt>

[Poorya Nkh]

Dear Dr. Abbaspour

I did as you instructed me, but it didn't solve my problem. 

Note that when i run my model for more that one simulations it gives me this error, but not for  one simulation.

My File.cio and my new echo_goal_fn file are attached. 

[Karim Abbaspour]

probably something wrong with your observation file. Also, follow the protocol here for choosing parameters:

http://www.sciencedirect.com/science/article/pii/S0022169415001985

Karim

 

---

From: Poorya Nkh <poory...@gmail.com>
To: SWAT-CUP <swat...@googlegroups.com>
Sent: Wednesday, June 28, 2017 11:29 AM
Subject: Re: output files does not exist.

[Abbaspour, Karim]

Your parameter values are mostly wrong. Please read parameterization section in the manual. Also make sure you are setting correct simulation values in SUFI2_swEdit.txt file.

 

Karim

 

From: swat...@googlegroups.com [mailto:swat...@googlegroups.com] On Behalf Of Poorya Nkh
Sent: Wednesday, June 28, 2017 11:29 AM
To: SWAT-CUP
Subject: Re: output files does not exist.

 

Dear Dr. Abbaspour

[Poorya Nkh]

Dear Dr. Abbaspour

I fixed the echo_goal_fn problem, but still, my simulation doesn't show me any outputs (they also are not in sufi2.out folder). but in par_inf.txt when I consider simulation=1 the outputs are shown. 

Best

[Md Mahabub Arefin Chowdhury]

Hi All, 

I faced exactly the same problem? Can anyone please help me with this?  

Regards,

Mahabub

[Bhaswatee Baishya]

Hi Everyone,

I am facing the same problem. It is showing that my output file does not exist even after i run for 1 simulation or 50 simulations. 

Please help. what should i do?

Thanks and regards,

Bhaswatee