Jtag Xbox 360 Usb Download Free
Geoffrey Beird
I've got new xbox 360 e 250GB jtag v4 for only 2 weeks and today this happened. Tried to start the xbox, solid red light is on (light on power supply orange). Disconected everything, reconnected. Xbox started for few second, green light changed from green to red and that's it.
I called technical support and they said to disconnect and reconnect everything, if it doesn't work bring the xbox to the shop. I will probably do this in any case, but just wanted if there anything else I can do (try)? What could be the cause?
Tech support are the guys at the shop where I purchased Xbox. They make a JTAG modification and the warranty is from their side. They are ok, but don't want to drive 100km just for a problem which can be fixed at home (without opening the console)
could be a glitch, keep an eye on it. they can do that if the image hasn't wrote correctly that's why I was wondering if it powered on with the eject button. but it's working now so all good I guess.
Could it be related to the power cord? When I got the xbox, the power cord was not working. Call the tech support, said to try it with LCD screen power cord. Tried it, worked normally. Then they sent a new one, which I plugged it onto my LCD screen. Could it be a problem there?
no worries, you don't normally, when you have a "jtag" as to speak, you power the machine on using the eject button to get to "xell" this is to get your nand and cpu key from the device via www and write it back once you've created an image. ..... however after failed dashlaunch updates etc. then the trick is to power it on using this method, that's the only reason I suggested it for.
If you press and hold the "sync" button [small one you press to connect wireless controllers] and press the eject button you'll get an error code (check how many leds are blinking in the ring) this error code will tell you what went wrong... if you get no error code it could be a MFG error in which case you need to make sure to have networking connected or wait like 5-10 minutes for an error to show up...
Of course, sometimes you'll also see an error on the TV (E##) with a message telling you to call the customer support blabla... if that's the case just post the error you see there (no need to go with the secondary error code as it'll tell you the exact same thing anyways)
I've had the same problem with my Xbox 360 E Jtag Console, and when I would turn it on, the Power Light would briefly come on green, and switch to red. After several diagnostics and analysis, I found the solution to this problem! Okay, so o get this under control, follow the following! Keep in mind that this problem is not with your Xbox, but the power supply. In my case, the problem occurred to me when I accidentally plugged my console into a higher voltage plug that recommended, but nothing serious happened, so no replacing! Try my method out though!
1) Turn off Console (in the case of it being on) and disconnect ALL wires from the console. So the Kinect sensor, the power cable, HDMi or AVI cable, any USB's. Then place the console to the side. nothing should be attached to the console at this point. Your console's back side should be like this:
2) Now to the power brick. The power brick is the big black box thing in which the wire from the plug goes to. Unplug that and let it sit there for a while or so. So that side of the power brick should be looking like this:
NOTE: If the same thing happens again, this time just remove the main wire from the plug (will shutdown everything attached to console, and console itself), and let it sit for another 10 minutes. After a few times, it will stop happening! keep in mind this worked for me! Worth a try!
This error can be caused by the software or the hardware (the PSU in your case is hardware, and it probably have a red led lit?) this could be caused by a short somewhere on the motherboard or in the psu, it can also be caused by a power surge seeing as it works after you've disconnected it for a while (letting it reset itself)
In etheir case i would start by checking the secondary error code (as described above) you can then check on -experts.com/errorcodes.php to maybe shed some light on what the error means, once you have some information of what the error mean you can start troubleshooting to find what the error is caused by and how you can possibly fix it...
It could be hardware fault, it can also be software fault... the only way to really know is to check the secondary error code, press and hold the sync button while pressing the Eject button, this should make the leds flash, take note of how many are lit and you'll have one digit in the 4 digit error code, once you have the error code you can start looking into what the actual cause is
Actually, RROD on Xbox 360 (phats) can also be software faults... 0020 can be a nand issue for instance, but most commonly it's GPU error... but, there's other codes that also means etheir hardware or software fault
Actually i never had software faults, because it is not really possible to do wrong steps in the flashing steps, as all puzzles (CPU, etc.) have to fit and you see messages if something is correctly accomplished or not. When i started and had such problems, i watched out for bad solderjoints which always (common) lead to these fails. It is really important to work right and clean in every hard- and software step.
Just because the build and write process is ok doesn't mean everything is ok... if the error occurs around the same time as you flash it's in 9 out of 10 cases a software issue, besides... rrod means theres an error during the checks, some errors are purely software related, others are hardware or software...
Hello guys, in the last few months I've been downloading all the WWE games available for Xbox 360. However, I can hardly find the DLC files available for RGH, so I wanted to know if any of you have the files from any game, from SmackDown vs. RAW 2009 to WWE 2K17, including WWE All Stars.
I would gladly upload the DLCs I already have (SvR 2010, SvR 2011, WWE '15 [just Hogan and Sting], WWE 2K16 and WWE 2K17] if anyone out there needs them, the idea is that with this publication, we can all get as much DLC files as possible.
how do you add these to xbox 360 is there a tutorial? i bought all the dlc for 14 on ps3 but i have it on 360 now, i realize its way past the support date, but would like the additional characters again. please an thanks
So I want to get back into 2K14. I bought the Season Pass when the game launched, and according to Microsoft, I can still download games and DLC I've already bought no matter how long it's been. Can I still actually download the 2K14 DLC, or should I just send my Xbox to get RGH'd once I get it in the mail? Part of me is thinking that, once you downloaded the Season Pass, you had to connect to the game's server (which is obviously down now) to download the content itself.
Ah, OK. The one good tutorial I found showed the guy opening a RAR file containing DLC for (I think) Black Ops 2, and the archive structure was "BO2 Game ID"\00000002. The 2K14 RAR from the link in this thread didn't have the DLC files in an 00000002 folder; that was what threw me off.
c80f0f1006