8 Plus Error 9

[Kerrie Gingrich]

Ihave tried twice to chat with someone at Dropbox, but unfortunately I get the sales chat and they don't know how to solve the issue. Because I started with a basic trial, I can't access support directly. I have tried with different credit cards to purchase the dropbox plus 2 TB plan, but I get an error after completing the form and pressing the purchase button. The error message says "Please correct the form errors and try again". I have tried multiple credit cards and get the same error. The second sales chat had be submit a support request for Dropbox Dash because that is the only way to contact support. I find it a bit odd that Sales cannot access support or transfer someone via chat to support. I am trying to give dropbox money but they are making it impossible for me to pay them. This is extremely frustrating and I have wasted a few hours trying to pay dropbox and upgrade my subscription.

Did this post help you? If so, give it a Like below to let us know.

Need help with something else? Ask me a question!

Find Tips & Tricks Discover more ways to use Dropbox here!

Interested in Community Groups? Click here to join

Did this post help you? If so, give it a Like below to let us know.

Need help with something else? Ask me a question!

Find Tips & Tricks Discover more ways to use Dropbox here!

Interested in Community Groups? Click here to join!

My Disney Plus just stopped working about 48 hours ago, error code 42. I tried on two different Roku models. I checked for updates. I uninstalled and reinstalled the channel. I restarted Roku, and the wifi/router. Nothing works. Disney Plus plays fine on all our tablets, but is not working on any Roku device in the house.

Still doesn't work, but now I get an OK button with this message included, "We're sorry, we're having trouble connecting you to the service. Please check to see that you are still connected to the internet, and try again (Error Code 42)."

Internet is connected, so that is not the issue. I have one Roku that is usually not plugged in, so it still has OS 10.0. Disney Plus Version 1.17 build 2021110300 works fine on there. It is only the ones running 10.5 that have issues.

I am having the same issue with the dreaded 'OK' button and Disney Plus. I contacted Disney Plus technical support a week ago and we walked through every possibility. They could not fix the issue at all. The problem is only with the Disney Plus channel. They ended up giving me a 1 month credit but that still doesn't solve the issue. It would be nice to watch new content on my TV without having to do all kinds of work arounds with computers or phones.

What does Roku tech support say I should do? I have updated all, factory reset, uninstalled, check internet, etc. It works on my computer and phone but will not on my Roku device. Any help would be great.

So this is still a problem clearly. Look, it's 10.5 and roku causing the issue. I rolled my TV back last week after getting this problem and sure enough disney was fine. Unfortunately due to roku insisting on total control and automatic updates on my set you guys updated it again last night- breaking disney+ as well as the information section of the liveTV explorer. Exactly like last week. You're breaking services people pay for. Can we get a response here. I've worked in IT and software QA for well over a decade. I know a bit about troubleshooting...

I have a HP OfficeJet 6500A Plus All-in-One that has worked perferctly for the last year and a half.When it came time to buy ink cartridges this time, I decided to go with the HP 920XL so that I didn't have to buy ink as often. Unfortunately, after changing the carts, instead of printing pictures of the grandkids for the wife, I am grteeted with a message on the screen saying, "There is a problem with the printer. Refer to Printer Documentation. 0x610000f6" I went to the HP website and tried all of the things in the support section relating to this error number, but NONE OF THEM WORKED.Unfortunately, the old cartridges were gone before I tried to use the printer and found this irritating message. Anyone have any idea how to get me up and going again? (It couldn't do this before I spent almost $70 in ink!)

No, I tried the docs on the front of the printer AND the docs on your support page. Nothing works... I do not understand how switching to HP brand 920XL ink cartridges caused this. The printer worked flawlessly unlee I tried to the bigger carts. I even tried a new set of 920 (not XL) but that didn't help either. I do know that if I can not get a solution for this, it will be the last HP anything I buy, or recommend.

I understand that you are getting an error '0X610000F6'. I will try my best to help you resolve this issue. In this document for A 'Carriage Jam' or '0X610000F6' Message Displays on the All-in-One you must follow the steps in the order presented to resolve the issue.

I am sorry that document did not help resolve the issue. I suggest we try a partial reset on the printer and if this does not work then we can try a semi-full reset. When you do a reset it will require a new ePrint address.

Before you begin hit the copy option and you will be able to see where the buttons are. You are looking for the bottom left (BL return arrow). Then press the home button and try the steps to the reset I sent you.

We have 30 M200 Plus Printers and 10 M200 Printers. These issues only happen on the M200 Plus Units. The only fix was to replace the Motherboard and/or the Android Board. In some cases it also seems to be damaging the LED Screen.

I have determined that the main culprit that is causing these errors and eventual damage to components is related to the lack of cooling in and around the PSU. The issues are very random and can happen to any one of the 30 printers at any time. It seemed at first to be related to extended print times but that is not always the case since it can happen after just a few hours. The build-up of heat eventually causes one or more of the electronic components to glitch in a way that triggers the errors. It could even be the power supply that is glitching causing an interruption of power to the main controls. Its impossible to know, but I know it is power related.

I was not the one to originally find this issue. It was posted by another user which is what caught my attention as I was searching for any reason why these random failures could be happening.

Since there are no heat sensors in the PSU area, there is no way for you to know this is the issue, Zortrax will simply have you replace the motherboard and whatever else is connected until it works again with these errors.

The result - These three upgrades have completely stopped the error codes and random failures. Some of our machines were starting to fail on every print and they are now error and failure free for days of running. It is unknown why the problem is worst now then a year ago. Could be a firmware update but its unknown at this time since we have done nothing to cause this.

I hope this helps many people with these issues. I have gone through HELL trying to stop these errors, and thanks to the other user that posted this heat issue it has changed my life back to getting work done versus trouble shooting endlessly and buying new expensive components every few weeks.

New to 3D printing. Just did my first print with the SV07 Plus with a 3D file I found from Printables. AWESOME! Amazing results. I then tried to print another file. Realized that it does not read .stl files so I tried to convert stl to gcode with PrusaSlicer. File loaded and appeared and preview visible in the queue but when I tried printing, gave me many errors.

Nothing against Orca, but I would point out that Prusa Slicer can be configured to work quite easily. And, Prusa is starting to move their printers to Klipper, so I would expect them to make significant contributions to the Klipper project.

i am using the new beta cura 5.5.0 just come out it as the sv07 klipper on it work very well, also i asked sovol when the new version of there software is coming out they said very soon still working on it

M140 S[bed_temperature_initial_layer_single] ; set bed temp

M190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize

M104 S[nozzle_temperature_initial_layer] ; set final extruder temp

M109 S[nozzle_temperature_initial_layer] ; wait for extruder temp

Hi everyone,

I am using Open studio 2.9.1, Honeybee 0.0.66 to run an energy simulation but it is giving me this error (attached foto) I tried whatever I could and knew, I also read the related topics but I am unable to solve it.

Please If it is possible look into my file and help me with it.

Thanks for your reply again.

It is so strange because now I am opening the gh file you have attached in your recent reply to a new blank Rhino file and it is giving me so many errors while it is working fine for you.

Is there anything related to the version of Rhino I am using?

I am using Rhino 7

6724789 118 KB

3a8082e126