Deco Model

[gbarn...@gmail.com]

Is there a reason why my Shearwater Perdix gradient factors 30/85 are correctly reported on Extra Information tab, but incorrectly reported at the top of the Profile image as 30/75? Is there a setting I need to change to have consistent information?

[Jason Bramwell]

These relate to different things. In the profile the red block of deco you see is what’s computed by the Shearwater using the gradient factors set on the Shearwater, the green block of deco is what’s computed by Subsurface based on the gradient factors set in the Subsurface preferences, this may be different to the dive computer e.g. you dive with a Suunto that uses an RGBM algorithm but want to see what it would look like compared with Bühlmann ZH-L16+GF

Jason

Sent from my iPhone

On 26 Jun 2023, at 15:30, gbarn...@gmail.com <gbarn...@gmail.com> wrote:

Is there a reason why my Shearwater Perdix gradient factors 30/85 are correctly reported on Extra Information tab, but incorrectly reported at the top of the Profile image as 30/75? Is there a setting I need to change to have consistent information?

--
You received this message because you are subscribed to the Google Groups "Subsurface Divelog" group.
To unsubscribe from this group and stop receiving emails from it, send an email to subsurface-dive...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/subsurface-divelog/7fa5f3a1-3626-45df-aad3-c16807a6de55n%40googlegroups.com.

[Andrew Goldby]

But if you want to you can make them both the same here

 

Cheers

 

Andy Goldby 

07740 583409

 

 

To view this discussion on the web visit https://groups.google.com/d/msgid/subsurface-divelog/70E24706-C32C-4083-B467-84BC686E98CC%40gmail.com.

[gbarn...@gmail.com]

Thanks Jason and Andy.