Unable to connect Suunto Vyper Air dive computer

[Felixou du 57]

Hello,

I'm trying to connect my Suunto Vyper Air dive computer but is doesn't work.
When I connect the dive computer, it is wroten "connected" at the bottom of the window, but when I try to get the data, I've the message "Error : failed" at the bottom of the window.

Here is the terminal :

meloli@portable:~$ subsurface
can't find Qt localization for locale "fr-FR" searching in "/usr/share/qt5/translations"
Plugins Directory:   QDir( "/usr/bin" , nameFilters = { * },  QDir::SortFlags( Name | IgnoreCase ) , QDir::Filters( Dirs|Files|Drives|AllEntries ) )  
[61.896178] ERROR: Failed to receive the echo. [in hw_ostc3.c:210 (hw_ostc3_transfer)]
[61.896209] ERROR: Failed to send the command. [in hw_ostc3.c:416 (hw_ostc3_device_init_download)]

My subsurface version is 4.6.3
My linux version is Kubuntu 14.04
My dive computer is Suunto Vyper Air

dmesg says :

[  410.472159] usb 6-1: new full-speed USB device number 3 using uhci_hcd
[  410.670668] usb 6-1: New USB device found, idVendor=0403, idProduct=f680
[  410.670680] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  410.670688] usb 6-1: Product: Suunto Sports Instrument
[  410.670695] usb 6-1: Manufacturer: Suunto
[  410.670701] usb 6-1: SerialNumber: ST04AITI
[  410.767351] usbcore: registered new interface driver usbserial
[  410.767367] usbcore: registered new interface driver usbserial_generic
[  410.767378] usbserial: USB Serial support registered for generic
[  410.784848] usbcore: registered new interface driver ftdi_sio
[  410.784867] usbserial: USB Serial support registered for FTDI USB Serial Device
[  410.785003] ftdi_sio 6-1:1.0: FTDI USB Serial Device converter detected
[  410.785042] usb 6-1: Detected FT232RL
[  410.785045] usb 6-1: Number of endpoints 2
[  410.785048] usb 6-1: Endpoint 1 MaxPacketSize 64
[  410.785051] usb 6-1: Endpoint 2 MaxPacketSize 64
[  410.785054] usb 6-1: Setting MaxPacketSize 64
[  410.787222] ftdi_sio ttyUSB0: Unable to read latency timer: -71
[  410.787423] ftdi_sio ttyUSB0: Unable to write latency timer: -71
[  410.787528] usb 6-1: FTDI USB Serial Device converter now attached to ttyUSB0
[  410.836314] usb 6-1: USB disconnect, device number 3
[  410.836521] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[  410.836537] ftdi_sio 6-1:1.0: device disconnected
[  420.748297] usb 6-1: new full-speed USB device number 4 using uhci_hcd
[  420.946692] usb 6-1: New USB device found, idVendor=0403, idProduct=f680
[  420.946705] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  420.946713] usb 6-1: Product: Suunto Sports Instrument
[  420.946720] usb 6-1: Manufacturer: Suunto
[  420.946726] usb 6-1: SerialNumber: ST04AITI
[  420.955858] ftdi_sio 6-1:1.0: FTDI USB Serial Device converter detected
[  420.955950] usb 6-1: Detected FT232RL
[  420.955958] usb 6-1: Number of endpoints 2
[  420.955965] usb 6-1: Endpoint 1 MaxPacketSize 64
[  420.955972] usb 6-1: Endpoint 2 MaxPacketSize 64
[  420.955978] usb 6-1: Setting MaxPacketSize 64
[  420.957589] usb 6-1: FTDI USB Serial Device converter now attached to ttyUSB0

Current user (meloli) is in the dialout group :

meloli@portable:~$ id meloli
uid=1000(meloli) gid=1000(meloli) groupes=1000(meloli),4(adm),10(uucp),20(dialout),24(cdrom),27(sudo),30(dip),46(plugdev),108(lpadmin),124(sambashare),125(vboxusers)

The problem is the same when runing as root.

Thank you for help !

[Robert C. Helling]

Are you sure you set the dive computer type to suunto vyper air? The error message looks like subsurface thinks it is talking to an ostc

[Felixou du 57]

You are right : I didn"t clic on the Suunto Family on the left.

But now it doesn't work again : after 6% I get the "failed" message.

meloli@portable:~$ subsurface
can't find Qt localization for locale "fr-FR" searching in "/usr/share/qt5/translations"

Plugins Directory:   QDir( "/usr/bin" , nameFilters = { * },  QDir::SortFlags( Name | IgnoreCase ) , QDir::Filters( Dirs|Files|Drives|AllEntries ) )  

[6.270480] ERROR: Failed to receive the answer. [in suunto_vyper.c:232 (suunto_vyper_transfer)]
[7.986451] ERROR: Failed to receive the answer. [in suunto_vyper.c:232 (suunto_vyper_transfer)]

[Miika Turkia]

You need to select both "Suunto" and "Vyper Air". I think you selected the old Vyper model instead of the Air one on your attempt.

[Felixou du 57]

Where can I select this ?

I've only the "Famille Suunto Vyper" choice.

(See the joined file with my printscreen please)

Thank you.

[Linus Torvalds]

On Wed, Mar 29, 2017 at 11:36 AM, Felixou du 57 <felix...@gmail.com> wrote:
>
> I've only the "Famille Suunto Vyper" choice.

That's not the download screen, that's the configuration screen (and
there is no Vyper Air configuraion).

Go to "Import" and "Import from Dive Computer" to download dives (or
just do ^D, which is the keyboard shortcut). Then choose "Suunto" as
the vendor, and you'll see a list of a lot of Suunto dive computers
(including "Vyper Air").

Linus

[Felixou du 57]

Oh great !

It's OK.

Thank you very much for this answer ... and all your work !