Ignore tanks without AI for SAC calculation?

[Wai Chun Ting]

I am only running a transmitter on my back gas during my deco dive, so my tank pressure was not recorded in the log. Is it possible to exclude the deco tank in the SAC calculation so that the SAC values can be shown on the dive log table?

Thanks!

[Jason Bramwell]

A better solution would be for you to manually enter the start and end pressure of the deco cylinder in the equipment tab and then that should give Subsurface the info needed to work out SAC over the while dive.

Jason

Sent from my iPhone

On 29 May 2023, at 16:48, Wai Chun Ting <thomas...@gmail.com> wrote:

I am only running a transmitter on my back gas during my deco dive, so my tank pressure was not recorded in the log. Is it possible to exclude the deco tank in the SAC calculation so that the SAC values can be shown on the dive log table?

Thanks!

<Screenshot 2023-05-29 234642.png>

--
You received this message because you are subscribed to the Google Groups "Subsurface Divelog" group.
To unsubscribe from this group and stop receiving emails from it, send an email to subsurface-dive...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/subsurface-divelog/9f3ed65b-c8f6-434f-a6ce-9464b013286cn%40googlegroups.com.

<Screenshot 2023-05-29 234642.png>