Studer/ Q-Lab question

[Reali, John]

 

Hey folks, can anyone tell me if it is possible, and how to change cues on a Vista 5SR using midi commands from Q-Lab? 

 

 

J.P. Reali

Eisenhower Theater

JPR...@Kennedy-Center.Org

202-416-8246

 

 

---

This e-mail message is intended only for the recipient(s) named above. This message may contain trade secrets, attorney-client communication, or other privileged and confidential information. Any review, re-transmission, dissemination, reproduction or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the Sender and delete the material from any computer.

[Tunnicliffe, James]

Not familiar enough with Q-Lab to help there, but cues can be advanced via MIDI show control.

 

From the manual:

4.4.5.2.8 MIDI Show Control Device

It is possible to control the cue list by using ‘MIDI Show Control’ commands.

Vista acts as a slave in this case. The following ‘MIDI Show Control’ commands

are supported: Go, Stop, Resume, Load, Reset, Standby+, Standby–,

Sequence+, Sequence–.

Vista is designated as a Music Command Format (0x11). The MIDI device

ID is set in the ‘Option: Snapshot Automation’ menu.

Examples Next Cue: F0 7F [Device ID] 02 11 01 F7 (Go command)

Previous Cue: F0 7F [Device ID] 02 11 12 F7 (Standby Command), then

F0 7F [Device ID] 02 11 01 F7 (Go Command)

Recall Cue 3.5: F0 7F [Device ID] 02 11 01 33 2E 35 F7 (Go Command with Q specified)

 

 

Watch out with MIDI (credit to Jesse Stevens here):

As we have found with all other MIDI events in the Console, there is an offset of 1, so sending MIDI 0 at the Studer we get MIDI 1 at a receiving device. 

So 127 at the device should equal 126 at the Desk....

 

Hope this helps.

 

James Tunnicliffe

Field Applications Engineer

Digital Console Specialist

 

 

STUDER Professional Audio,  USA RSO

8500 Balboa Blvd, Northridge, CA 91329, USA

+1 973 220 1622 (mobile)

james.tu...@harman.com; www.studer.ch

Facebook, Twitter, Youtube

 

--
You received this message because you are subscribed to the Google Groups "Studer Vista" group.
To unsubscribe from this group and stop receiving emails from it, send an email to studer-vista...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

[Reali, John]

James,

 

Thanks for the response.  I saw that in the manual but was not sure if there was more to it.  I can’t set this up until Monday due to the current show we are doing so I will know more then.  Thanks!!

 

JP

[Andy Lang]

Hey JP (and James),

I'm one of the QLab support team members (I moved here from Masque in the fall), so am happy to help as I can. If you need further help from our end once you're up and running, just give us a shout at sup...@figure53.com!

-Andy

---

This e-mail message is intended only for the recipient(s) named above. This message may contain trade secrets, attorney-client communication, or other privileged and confidential information. Any review, re-transmission, dissemination, reproduction or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the Sender and delete the material from any computer.

[Reali, John]

Andy,

 

That’s great, I will keep you posted. Thanks!

 

JP

 

From: studer...@googlegroups.com [mailto:studer...@googlegroups.com] On Behalf Of Andy Lang
Sent: Saturday, March 01, 2014 7:43 PM
To: studer...@googlegroups.com
Subject: Studer/ Q-Lab question

 

Hey JP (and James),