Problems with DS and Madcatz TE-S stick.

[Anton K]

Posted this in the DS-thread at shoryuken, and i thought that i would
try here aswell.

Ok, so i got the PCB and installed it in my te-s stick. The
passthrough funktion works great, and i get inputs from all the
buttons and directions in pc-mode and ps3. HOWEVER!

Every, and i mean, every button mapping is wrong (in pc and ps3)!
xguide gives UP, RIGHT gives MP and the list goes on and on. I solderd
the piggyback cable to the pins underneath the ribbonconnector on the
main PCB on the TE (exept for the xguide, which i solderd to the
xguide-pin on the pcb next too the turbopanel.) I have checked and
dubblechecked, but i cant find anything wierd.

Someone else with this problem? I haven't tried to reload the
firmware, but i will try that. And what if that wont work? Should i
write down what button gives what wierd input and resolder?

[Michael Pohl]

Hi!

Please first try to reinstall the firmware and reconfigure the DS. If that does not solve the problem, please download the MemoryTest Firmware <http://svn.combo-convention.de/filedetails.php?repname=dualstrike&path=%2FFirmware%2FReleases%2FMemoryTest.zip&sc=1> and follow the attached instructions. Then please post the result here for further analyzation.

Bye,
Michael

[Michael Pohl]

Which Dual Strike do you have? V3? Then install the non-SMD firmware (the name is misleading by now).

Bye,

Michael