DualStrike Teasy Not working for ps3/pc

[Gary Yeung]

Hello,

First want to say keep up the good work. I bought and installed the
TEasy Dual Strike over half a year ago (possibly close to 8-9
months). upon installation it works flawlessly.
My issue is that my fightstick is not working anymore for ps3 and pc.
On the pc it cannot auto-detect it, doesn't light up, and says usb
driver not installed correctly. When i hold MP, it'll show up under
my USB Controllers and i'm able to press the buttons and move the
joystick. When i try to plug it in holding HK (to access dual strike
board?), it doesn't detect it.
I plug into an xbox360 and all controls and functions work.

I try to re-flash the board but this is where i come into the most
problem.
I download the updater for 3.2.0 and try to run
update_firmware_atmega168.bat i says that "bootloadHID.exe" is not
recognized as an internal or external command, operable program or
batch file.
I also try to open configuration_editor_atmega168.bat and says that
javaw cannot be found.
-i tried googleing this and doing the whole cmd command path
%path%; <my folder location for javaw> and doesn't work even after i
do this.

I reset the board, and tested connection with multimeter and all
things are connected.

So what i'm wondering is, there a way to re-flash this with the errors
stopping me? Or did something happen the board that causes it not to
function anymore.

Appreciate the help,
Gary

[Clayton Knight]

Gary,

Quick question, as it sounds like you've tested everything and gotten to the re-flash part of the troubleshooting:

I download the updater for 3.2.0 and try to run
update_firmware_atmega168.bat i says that "bootloadHID.exe" is not
recognized as an internal or external command, operable program or
batch file.

I've only seen that error when the archive is not extracted, can you confirm that you've extracted the archive... and then run the .bat file?

-Clayton

[Gary Yeung]

Mm... well don't i seem like a dumb dumb.

That solved it lol,
thanks for the support.

On Dec 11, 6:31 pm, Clayton Knight <phreakazoid...@gmail.com> wrote:
> Gary,
>
> Quick question, as it sounds like you've tested everything and gotten to
> the re-flash part of the troubleshooting:
>

> *I download the updater for 3.2.0 and try to run

> update_firmware_atmega168.bat i says that "bootloadHID.exe" is not
> recognized as an internal or external command, operable program or

> batch file.*

[Gary Yeung]

Another quick question... The first time this actually arose was when
i plugged it into a friends
xbox360. Worked fine, hadn't used it until 3 months later where i
first noticed the board wasn't working anymore.
Is this a common issue? Am i going to have to reflash everytime i
plug it into an xbox360 or something?

-Gary

[Clayton Knight]

No worries, glad you're up and running.

Have fun!

-Clayton