Strike Devices Support Mailing List

Thanks for the answer now i know. I did not compile the firmware i do not have the knowledge to do so

Hi, I have been looking at using the Dual Strike Encoder PCB (http://arcadeforge.net/GamePad-Key-

inzwischen werden alle switches (buttons und joysticks) im key strike manager erkannt. leider gottes

Hello, what can i do, Thats my KeyStrike2 in fully recognize??? In menu its okay. But in Game the

Hi Mir sind ja die Button Belegung klar auch der eine gnd, aber warum ist dort ein Anschluss für 5

Hello, why he will not be automatically recognized as the xbox360 controller. can I somehow create a

Ok, thanks for the reply. I guess I'll use it in keyboard encoder mode (MAME mode) then. Not a

Update: Neither of these boards works at boot, but when I unplug them and reconnect, they're fine

Dennis, Not as plug and play outright, no unfortunately. You can technically make the cerberus work

Hi, one of my Dual Strikes died. It was working fine the last time it was used. Wont be recognized by

Hi! Did you try the links on this page: <http://strike-devices.net/index.php/game-controllers/dual

Hallo! Wenn du am PC den durchgeschleiften Controller verwenden willst, obwohl Auto-Detection an ist,

Hallo! Wir sind dabei die Probleme mit Windows 8 zu untersuchen. Handelt es sich um Windows 8.1?

Hi, sorry for the late answer ! The device now always gets detected as an unknown device by windows (

It works now, thanks! tiistai, 29. lokakuuta 2013 18.49.49 UTC+2 Michael Pohl kirjoitti: Strange

Start is the same for the normal and SMD firmware, thus if going to Firmware Update mode by pressing

Which Dual Strike do you have? V3? Then install the non-SMD firmware (the name is misleading by now).

Hey, I would suggest using the configuration editor to make sure everything is set and correct.

Such errors usually point towards a bad USB connection. If you can rule that out absolutely (eg by

I just shipped it today. You'll see the address it needs to be shipped back to on the back of the

Hi, You have a Dual Strike V3, and after installing did you have these problems immediately or after

No worries, glad you're up and running. Have fun! -Clayton On Mon, Dec 12, 2011 at 5:13 AM, Gary

No! -------- Original-Nachricht -------- > Datum: Sat, 10 Dec 2011 09:47:17 -0800 (PST) > Von:

> now my dual strike isn't even recognizing on my pc for me to update, > could it have just

Hi! > I bought two new dual strikes. If I plug one in a USB port Windows XP > recognizes it.

Evan, I would recommend attempting to re-flash the firmware of the board first. Download the file

absolutley out of discussion that this issue has to been tracked. But it`s difficult to overcome

> Is the PCB broken? It seems so, but I did nothing that could have > caused it. It just

All, After doing some brainstorming, it just hit me that it's likely that the d+/d- lines going

Darc, That's a Rev. B board, you should be just fine with the TEasy Strike :) -Clayton On Fri,